This work sought to draw a comparison between the photocatalytic proficiency of NiO nanoparticles (NPs) for the degradation of Methylene blue (MB) and Rhodamine B (Rh B) dye. The NiO NPS were synthesized by a facile straightforward chemical route by utilizing NiCl2 and NaHCO3 as a precursor. The morphological characteristics of the synthesized NiO NPs have been characterized by using SEM. In addition XRD, FTIR and EDX analysis were also carried out to investigate the crystalline size, functional group and elemental composition of the NPs. The NiO NPs were subsequently used for the photocatalytic degradation of the MB and Rh B in the presence of the visible light irradiation. For evaluation of photocatalytic proficiency, the influence of various key parameters viz. pH of the dye solution, initial dye concentration, Irradiation time and amount of the catalyst were investigated. The extent of photocatalytic degradation of MB and Rh B was found to be 98.7 and 80.33% at pH 2 and 10 respectively. The kinetic investigation of photocatalytic degradation followed a pseudo-first-order rate kinetics for MB and Rh B dye with rate constant 4.6 × 10−1 and 3.6 × 10−2. Additionally, the synthesized NiO NPs was used for the antimicrobial activity against the few gram-positive and gram-negative microorganisms. Highlights GRAPHICAL ABSTRACT
The present work deals with the development of a new method for the removal of dyes from an aqueous solution using polyaniline (PANI)–Fe3O4 magnetic nanocomposite. It is synthesised in situ through self-polymerisation of monomer aniline. Photocatalytic degradation studies were carried out for cationic acid violet 19 (acid fuchsine) dye using PANI–Fe3O4 nanocomposite in aqueous solution. Different parameters like catalyst dose, contact time and pH have been studied to optimise reaction condition. The optimum conditions for the removal of the dye are initial concentration 20 mg/l, adsorbent dose 6 gm/l, pH 7. The EDS technique gives elemental composition of synthesised PANI–Fe3O4. The SEM and XRD studies were carried for morphological feature characteristics of PANI–Fe3O4 nanocomposite. The VSM (vibrating sample magnetometer) gives magnetic property of PANI–Fe3O4 nanocomposite; also FT-IR analysis gives characteristics frequency of synthesised PANI–Fe3O4. Besides the above studies kinetic study has also been carried out.
1 November 2021 in Journal of the Indian Chemical Society
The present study reports a simple co-precipitation approach for the synthesis of SnO2 nanorods. The SnO2 nanorods were characterized by XRD, SEM, TEM, EDAX, SAED, and FTIR techniques, to examine their structural, morphological, functional group, and elemental properties. The findings of the SEM and TEM reveal the nanorod like morphology. For the adsorptive and photocatalytic removal of methylene blue dye from their aqueous solution the synthesized SnO2 nanorods have been used. The effect on adsorptive and the photocatalytic removal capability of SnO2 nanorods was examined by optimizing the various parameters such as pH, initial dye concentration, contact time and catalyst dose. Tha maximum adsorptive and photocatalytic removal of MB up to the 66% and 94% were obtained at pH = 7 and pH = 2, respectively. Besides, experimental adsorption results were used for the exploration of kinetics and adsorption isotherm (Langmuir and Freundlich), which shows that methylene blue adsorption over SnO2 nanorods follows the pseudo-second-order kinetics with the rate constant K2 is 1.1 × 10−1 (g/mg/min) and obeys the Langmuir isotherm. However, the thermodynamic parameters were studied, indicating that adsorption is spontaneous and favorable. The adsorptive removal is an endothermic process and pointing towards the chemisorptions nature of the process. Graphic abstract