The basic wood density influences the carbon stock, playing a crucial role in climate-changing global mitigation through carbon sequestration. Understanding wood carbon release depends on the Nitrogen assessment and CN ratio. Therefore, our research aimed to: (i) Compare basic density, organic carbon, nitrogen, and C/N ratio among the Khaya grandifoliola, K. ivorensis, and K. senegalensis; (2) Analyze the gradient along positions and diameter of the commercial stem; (3) Recommend the most representative sampling position for each species based on the diameter. The experimental area is located in Southeastern Brazil. Twelve average-diameter trees per species were cut down, and wood disc samples were collected at 0, 25, 50, 75, and 100% commercial height. Our results show statistical differences in wood basic density among the species, and K. senegalensis has the highest basic density, 592 kg m3. There was no statistical difference in organic carbon between species and along the stem. Stem diameter instead of commercial height improved the variable studied, confirming the research hypothesis. Sampling at 17% of the commercial height, ranging to 18–22 cm stem diameters, is recommended for greater representativeness.
8 August 2024 in European Journal of Wood and Wood Products
The objective of this study was to evaluate the energy potential of Astronium fraxinifolium and Enterolobium gummiferum wood species that grow in the Savannah of Minas Gerais, Brazil, focusing on the production of charcoal. Two discs were removed at 1.30 m from the ground of three trees of each species, and these were later sampled into wedges that were applied in the analysis of wood characteristics and charcoal production in a muffle furnace. The extractives content and basic density of the wood species were determined, and apparent density of charcoal, ash content, heating value, and energy density of both materials were also determined. The woods under study have potential for application in energy production. Emphasis was placed on A. fraxinifolium, which presented wood and charcoal that was denser, had higher energy density, and achieved greater gravimetric yield.
Variability in Eucalyptus wood density and chemical properties is crucial to understanding important factors for the forest-based industry, such as sampling methods and wood suitability as raw material. This study aimed to evaluate the basic density and chemical composition of the radial positions of young wood from the Eucalyptus urophylla clone grown under different precipitation levels. Trees from E. urophylla clonal plantations were collected in Inhambupe, Jandaíra and Itanagra, Bahia State, Brazil. Trees’ basic density and chemical composition (total extractive, lignin, hemicelluloses and α-cellulose) were determined based on the basal log of each tree, at four radial positions (1, 2, 3 and 4). It was found that the basic density and α-cellulose of wood are influenced by the cambial age and the site rainfall. There was greater increase in sections close to the bark (positions 1 and 4) and in more humid environments (sites Itanagra and Jandaríra). This finding highlights the association between wood basic density and chemical composition, mainly in the holocellulose content.
A madeira do gênero Pinus é amplamente utilizada na indústria florestal, principalmente no setor moveleiro e civil, sendo assim, importante a busca por técnicas que melhorem e aperfeiçoem as suas propriedades tecnológicas. Neste sentido, o presente estudo teve como objetivo avaliar o efeito da modificação térmica nas propriedades físicas da madeira de Pinus caribaea var. hondurensis sob duas diferentes temperaturas. Foram utilizadas três árvores com idade de 14 anos do campo experimental da Universidade Estadual do Sudoeste da Bahia, em Vitória da Conquista, BA, das quais foram confeccionadas em amostras com dimensões de 30 x 30 x 50 mm. O processo de modificação térmica foi realizado em uma estufa laboratorial a 160ºC e 200°C de temperatura final de ciclo que, somados ao controle, representaram três tratamentos em análise. Foram realizados os ensaios de densidade aparente, umidade, perda de massa, taxa de absorção de água e estabilidade dimensional. Concluiu-se que a modificação térmica alterou as propriedades físicas avaliadas, tornando a madeira menos higroscópica e com maior estabilidade dimensional, além de ter influenciado na coloração da madeira em relação a sua aparência natural.
Considering the importance of charcoal in promoting sustainable steelmaking as an agent for environmental decarbonization, the aim of this research was to examine the energy quality of charcoal produced from the wood of seven Cerrado forest species. The material used in this study came from trees located in various municipalities in the state of Minas Gerais, Brazil, within the area of occurrence of the Cerrado Sensu Stricto biome. The disks were collected at breast height (1.3 m above the ground) and then subdivided into four wedges, passing through the pith. Two of these wedges were allocated for determining physical and anatomical properties, while the other two were designated for carbonization. The anatomical and physical elements of the wood were described, and a multivariate analysis of charcoal quality was conducted. Among the seven species investigated, the best results were obtained for Bowdichia virgilioides, a specimen with a higher basic wood density and longer fibers, important characteristics for its high performance in charcoal production and quality. The medium-density Persea willdenovii wood produced low-density charcoal, while Qualea grandiflora and Tabebuia aurea were not recommended for use in the metallurgical industries, as they did not meet satisfactory fixed carbon standards. This study aims to provide a significant role in charcoal production by diversifying the sources of wood currently used.