Several experiments have shown a huge enhancement in thermal radiation over the blackbody limit when two objects are separated by nanoscale gaps. Although those measurements only demonstrated enhanced radiation between homogeneous materials, theoretical studies now focus on controlling the near-field radiation by tuning surface polaritons supported in nanomaterials. Here, we experimentally demonstrate near-field thermal radiation between metallo-dielectric multilayers at nanoscale gaps. Significant enhancement in heat transfer is achieved due to the coupling of surface plasmon polaritons (SPPs) supported at multiple metal-dielectric interfaces. This enables the metallo-dielectric multilayers at a 160-nm vacuum gap to have the same heat transfer rate as that between semi-infinite metal surfaces separated by only 75 nm. We also demonstrate that near-field thermal radiation can be readily tuned by modifying the resonance condition of coupled SPPs. This study will provide a new direction for exploiting surface-polariton-mediated near-field thermal radiation between planar structures.
14 January 2022 in Solar Energy Materials and Solar Cells
Polydimethylsiloxane (PDMS) is a prominent material for radiative cooling due to its promising optical properties in the mid-infrared spectral region as well as its fabrication easiness. Even though several works have reported that the mid-infrared emissivity of a PDMS film can be increased by surface modification, there is still room for further enhancement through global optimization. Here, we designed and fabricated the thin PDMS film patterned with two-dimensional gratings to obtain the highest emissivity in the wavelength range from 8 to 13 μm. A surrogate-model-based optimization was performed, and the optimum structure exhibited the averaged emissivity value of 0.99 in the wavelength of 8–13 μm, which is the highest value reported to date among polymer-based radiative coolers. For real-world applications, we also developed the fabrication method that is repeatable and applicable for various surfaces using a flexible master mold.
1 March 2022 in Solar Energy Materials and Solar Cells
Here, we demonstrate a substantially increased near-field radiative heat transfer between asymmetric structures (i.e., doped and ) by using a thin film as a plasmonic coupler. The measured near-field enhancement at vacuum gap of 380 nm is found to be 3.5 times greater than that for the case without the coupler. The enhancement mechanism is thoroughly elucidated for both polarizations, and a dimensionless parameter, which can quantify the coupling strength of the surface polaritons across the vacuum interfaces, is proposed.
A solar thermophotovoltaic (STPV) system can transform incident concentrated solar energy into electrical energy with an efficiency that could be higher than the Shockley–Queisser limit. Near-field thermophotovoltaic (NF-TPV) devices can generate larger electrical power output than traditional far-field TPV devices with the aid of photon tunneling. Moreover, multi-junction PV cells can boost the performance of TPV devices by effectively distributing the absorbed photon energy inside the PV cell. In this work, we design a multi-junction-based near-field STPV system with a practical and high-temperature stable graphite intermediate structure. To optimize the system configuration, we employ a genetic algorithm and a surrogate model based on an artificial neural network, which enables us to suggest a better design approach for the multi-junction-based NF-STPV system between the power output density and power conversion efficiency maximization scenarios. When the concentration factor of the incident solar energy is 5000 and the absorber-to-emitter area ratio is 3, we can achieve a system efficiency of 23%. By introducing a material whose emissivity is as high as a blackbody on the solar absorber, the system efficiency can be further enhanced up to 35%.