Xin Zhao

Prof. Xin Zhao

orcid

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 April 2014 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
XZXin Zhao
Xin Zhao
JAJesus A. del Alamo
Jesus A. del Alamo
This letter introduces a novel inductively coupled plasma-reactive ion etching (ICP-RIE) technique based on a BCl3/SiCl4/Ar chemistry for fabricating sub-20 nm diameter InGaAs nanowires with smooth, vertical sidewall and high aspect ratio (>10). To mitigate dry-etch damage, RIE is followed by a digital etch method comprised of multiple cycles of self-limiting low power O2 plasma oxidation and diluted H2SO4 rinse. Using these technologies, we demonstrate vertical InGaAs gateall-around nanowire MOSFETs with 30 nm diameter. Digital etch improves both the subthreshold swing and peak transconductance, indicating enhanced sidewall interfacial quality. The combination of RIE and digital etch techniques proposed here is promising for future 3-D III-V MOSFETs.

20 February 2015 in Nature Communications
Verified
Journal Article
Open access
PDF file
CHChong Hou
Chong Hou
XJXiaoting Jia
Xiaoting Jia
Lei WeiLei Wei
Lei Wei
STSwee Ching Tan
Swee Ching Tan
XZXin Zhao
Xin Zhao
YFYoel Fink
Yoel Fink
Traditional fibre-optic drawing involves a thermally mediated geometric scaling where both the fibre materials and their relative positions are identical to those found in the fibre preform. To date, all thermally drawn fibres are limited to the preform composition and geometry. Here, we fabricate a metre-long crystalline silicon-core, silica-cladded fibre from a preform that does not contain any elemental silicon. An aluminium rod is inserted into a macroscopic silica tube and then thermally drawn. The aluminium atoms initially in the core reduce the silica, to produce silicon atoms and aluminium oxide molecules. The silicon atoms diffuse into the core, forming a large phase-separated molten silicon domain that is drawn into the crystalline silicon core fibre. The ability to produce crystalline silicon core fibre out of inexpensive aluminium and silica could pave the way for a simple and scalable method of incorporating silicon-based electronics and photonics into fibres.

7 July 2016 in IEEE Journal of the Electron Devices Society
Verified
Journal Article
Open access
JAJesus A. Del Alamo
Jesus A. Del Alamo
DADimitri A. Antoniadis
Dimitri A. Antoniadis
JLJianqiang Lin
Jianqiang Lin
WLWenjie Lu
Wenjie Lu
AVAlon Vardi
Alon Vardi
XZXin Zhao
Xin Zhao
After 50 years of Moore's Law, Si CMOS, the mainstream logic technology, is on a course of diminishing returns. The use of new semiconductor channel materials with improved transport properties over Si offer the potential for device scaling to nanometer dimensions and continued progress. Among new channel materials, III-V compound semiconductors are particularly promising. InGaAs is currently the most attractive candidate for future III-V based n-type MOSFETs while InGaSb is of great interest for p-channel MOSFETs. At the point of most likely deployment, devices based on these semiconductors will have a highly three-dimensional architecture. This paper reviews recent progress toward the development of nanoscale III-V MOSFETs based on InGaAs and InGaSb with emphasis on scalable technologies and device architectures and relevant physics. Progress in recent times has been brisk but much work remains to be done before III-V CMOS can become a reality.

9 May 2017 in IEEE Electron Device Letters
Verified
Journal Article
Open access
XZXin Zhao
Xin Zhao
AVAlon Vardi
Alon Vardi
JAJesus A. del Alamo
Jesus A. del Alamo
This letter demonstrates top-down InGaAs/InAs heterojunction vertical nanowire tunnel FETs with sub-thermal subthreshold characteristics over two orders of magnitude of current. A minimal subthreshold swing of 53 mV/decade at V ds = 0.3 V has been obtained at room temperature. An I 60 (defined as the highest current level where the subthreshold characteristics exhibit a transition from sub- to super-60 mV/decade behavior) of 4.3 nA/μm has been achieved at V s = 0.3 V. Compared with an earlier device generation, much reduced temperature dependence of the subthreshold characteristics is observed in this letter. The major difference between the two device generations is the drastically reduced interface trap density, evidenced by the improvement in the subthreshold swing of InGaAs vertical nanowire MOSFETs fabricated at the same time. This result suggests oxide-semiconductor interface trap-assisted tunnelling the main leakage mechanism in III-V TFETs fabricated by our process. The improvement in the interface quality has been enabled by improved gate oxide deposition and post-deposition treatment.

1 December 2013
Verified
Conference Paper
Closed access
JLJianqiang Lin
Jianqiang Lin
XZXin Zhao
Xin Zhao
TYTao Yu
Tao Yu
DADimitri A. Antoniadis
Dimitri A. Antoniadis
JAJesus A. del Alamo
Jesus A. del Alamo
We have developed a new III-V self-aligned Quantum-Well MOSFET (QW-MOSFET) architecture that features a scalable highly conducting ledge over the channel access region. The extensive use of RIE and digital etching techniques enables the precise design of the length and thickness of the ledge and allows the careful balancing of performance against short-channel effects. We demonstrate L g =70 nm InAs MOSFETs with a ledge length of 5 nm that feature a record g m of 2.7 mS/μm. Separately, devices with a ledge length of 70 nm yield a record ON-current of 410 μA/μm (V dd =0.5 V and I off =100 nA/μm). We also demonstrate working MOSFETs with L g = 20 nm and a very tight metal contact spacing. Devices with a 5 nm ledge length reveal for the first time the existence of off-state leakage (GIDL) in III-V MOSFETs.

1 December 2013
Verified
Conference Paper
Closed access
XZXin Zhao
Xin Zhao
JLJianqiang Lin
Jianqiang Lin
CHChristopher Heidelberger
Christopher Heidelberger
EFEugene A. Fitzgerald
Eugene A. Fitzgerald
JAJesus A. del Alamo
Jesus A. del Alamo
Vertical In 0.53 Ga 0.47 As Gate-all around (GAA) nanowire (NW) MOSFETs fabricated by a top-down approach are demonstrated experimentally for the first time. The fabrication process features a new III-V dry etch process capable of sub-20 nm diameter NWs with an aspect ratio greater than 10. It also includes a digital etch technique to controllably reduce nanowire diameter and remove dry etch damage. With a channel length L ch =80 nm and EOT=2.2 nm, we obtain a transconductance of 730 μS/μm at 0.5 V in a 50 nm diameter NW MOSFET. The digital etch increases the transconductance by 20% and improves the subthreshold characteristics of the devices. In terms of balance of transport and short-channel effects, our MOSFETs match the best vertical nanowire devices fabricated by bottom-up techniques.