Xing Liu

Mr. Xing Liu


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 March 2021 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
Feng YUFeng YU
Feng YU
CZChenhui Zhou
Chenhui Zhou
XLXing Liu
Xing Liu
CZChenguang Zhu
Chenguang Zhu
Parameter mismatches in conventional model predictive current control (MPCC) would worsen torque and THD performance. To eliminate the parameter dependence of MPCC, this letter proposes a model-free predictive current control (MFPCC) for a three-level inverter-fed interior permanent magnet synchronous motor (IPMSM). Firstly, to increase the current difference updating frequency in the diode neutral-point-clamped (NPC) three-level inverter, a synchronous updating method is proposed in a manner where the number of updated current differences during one sampling period is increased up to 6. Secondly, for the sake of computational burden alleviation, a candidate vector selection algorithm is introduced in such a way that the number of candidate vectors is reduced to only 7–9. Then, the problem of neutral-point voltage fluctuation which is inherent to the three-level NPC inverter is investigated, and a reasonable replacement method incorporating the redundancy characteristic of small vectors is developed. Finally, experimental results verify that the system robustness against mismatched parameters can be greatly enhanced by use of the proposed control scheme; meanwhile, steady-state performance and dynamic-state response of the system can be improved to some extent as well.

6 October 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
XLXing Liu
Xing Liu
Hui YangHui Yang
Hui Yang
HLHeyun Lin
Heyun Lin
Feng YUFeng YU
Feng YU
Yong YangYong Yang
Yong Yang
Model predictive control (MPC) has attracted a lot of attention for power converters and motor drives in the last decade, owing to its merits such as explicit concept, excellent dynamic performance, and decent applicability in digital implementation. However, as a model-based method, classical MPC is heavily dependent on the system parameters of the plant under control. In this article, a novel finite-set sliding-mode model-free predictive current control (FS-SM-MFPCC) is proposed for permanent magnet synchronous machine (PMSM) drives, which combines the theory of sliding-mode control with MPC. The proposed strategy is thoroughly model-free, irrelevant for the dc-link voltage, and computationally light. The original version of the suggested strategy suffers from two flaws: 1) poor steady-state performance and 2) existent tracking errors, which are solved by using a simple correction algorithm and an extended control set coordinating with an improved cost function, respectively. The comparatively experimental results based on a 500-W PMSM drive are given to confirm the benefits of the proposed strategy.

4 January 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Feng YUFeng YU
Feng YU
ZZZhihao Zhu
Zhihao Zhu
XLXing Liu
Xing Liu
ZZZhen Zhang
Zhen Zhang
In this article, a novel electric-drive-reconstructed onboard charger (EDROC) is proposed for the solar-powered electric vehicle that incorporates a six-phase machine drive. The power traction inverter and the machine are re-leveraged to implement charging operation, further minimizing the incremental mass accordingly. In particular, charging and driving operations can be simultaneously carried out via the vehicle-roof photovoltaic panels, significantly expanding EV mileage range. First, the operation scenario and the topology of the proposed EDROC are introduced. Next, the operational principle is analyzed, as well as the indispensable conditions for safe and stable operation are studied. Thereafter, control schemes are designed and elaborated in terms of the simultaneous driving and charging mode and the dc charging mode. To this end, a 2-kW laboratory prototype is conducted, and experimental results are presented to verify the steady-state and dynamic behavior of the proposed EDROC system under different operation modes.

14 October 2020 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
Feng YUFeng YU
Feng YU
XLXing Liu
Xing Liu
ZZZhihao Zhu
Zhihao Zhu
JMJingfeng Mao
Jingfeng Mao
This work presents an improved finite-control-set model predictive flux control (FCS-MPFC) for asymmetrical six-phase permanent magnet synchronous machine (ASPMSM) with a novel duty-cycle regulation strategy. Firstly, virtual vector concept is adopted to suppress harmonic currents without additional cost function and the corresponding weighting factor. Then, 12 virtual vectors with higher voltage utilization are developed. Meanwhile, for the sake of strengthening steady-state performance, a novel duty-cycle regulation strategy incorporating the well-known Lagrange multiplier method is proposed. In this strategy, the reconfigurable set of voltage vectors (SVV), which consists of an active and a null virtual vector, can be determined without second modification, hence highly mitigating additional computation burden. Furthermore, in order to realize the purpose of unified switching frequency, the SVVs are implemented in terms of regular rather than irregular PWM signal pattern. Finally, experimental results prove the effectiveness of the proposed method.

16 September 2021 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
XLXing Liu
Xing Liu
Feng YUFeng YU
Feng YU
JMJingfeng Mao
Jingfeng Mao
Hui YangHui Yang
Hui Yang
The concept of electric-drive-reconstructed onboard charger (EDROC) potentially opens the door to harness the existing drivetrain in electric vehicle (EV) to do the job of battery charger, thus performing a remarkable value in commerce. In this article, the pre- and post-fault operations of an EDROC are studied, which incorporates an asymmetrical six-phase permanent magnet synchronous machine (ASPMSM) drive. At first, the decomposed currents of the machine in healthy and faulty cases are solved and their trajectories are depicted, indicating that a rotating field will exist if an open-phase fault (OPF) occurs. Afterward, a rotating field cancellation scheme based on the minimum copper loss criterion is proposed by rearranging stator currents, with two constraints under consideration that are responsible for generating pulsating field and balanced grid currents, respectively. Following this, a control scheme shared for both pre- and post-fault conditions is proposed, where the carrier-based modulation without any zero-sequence signal injection is employed. Finally, the proposed rotating field cancellation scheme is verified by experimental results.

11 April 2022 in IEEE Access
Verified
Journal Article
Open access
Feng YUFeng YU
Feng YU
KLKaikai Li
Kaikai Li
ZZZhihao Zhu
Zhihao Zhu
XLXing Liu
Xing Liu
To improve the voltage utilization rate of DC bus and reduce the voltage vector tracking error, a finite-control-set modulated model predictive control (FCS-M2PC) with overmodulation capacity for permanent magnet synchronous motor (PMSM) incorporating penalty function is proposed in this paper. Firstly, three modulation regions are determined according to the combined action of dead-beat control and model predictive control (MPC). Secondly, three, two and one voltage vectors are applied to linear modulation region (LMR), overmodulation region I (OMR-I) and overmodulation region II (OMR-II), respectively, to synthesize the reference voltage vector. Thirdly, to obtain better steady-state performance in the whole modulation region, the optimal vector dwell-times can be obtained from the uniform penalty function defined by a set of mode parameters to minimize the error between the current references and the current predictions, rather than applying a single voltage vector in the conventional finite-control-set model predictive control (FCS-MPC). The effectiveness and superiority of the proposed method are validated experimentally.