Zhiqiang Guo

Dr. Zhiqiang Guo


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 May 2023 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Verified
Journal Article
Closed access
ZGZhiqiang Guo
Zhiqiang Guo
CLChunwang Liu
Chunwang Liu
JLJunlin Luo
Junlin Luo
In this paper, a longitudinal-vertical coupling tracked vehicle dynamic model is established to simultaneously describe the longitudinal, vertical and pitch dynamic responses of the tracked vehicle under off-road conditions. The road wheels are subjected to variable longitudinal-vertical forces due to the terrain unevenness and the excitations are transmitted to the vehicle body through the torsion suspension system. An experiment by means of a scaled-down tracked vehicle was carried out. The comparisons between the field test results and simulation results verified the effectiveness of the coupling dynamic model on predicting the vehicle dynamics. Taking advantage of the coupling tracked vehicle dynamic model, the energy computation formulas are further derived to quantitatively study the vehicle energy consumptions. The energy consumption distributions of the tracked vehicle on uneven road and paved road at different velocities are analysed. The computation results indicate that the developed energy computation method is reliable on predicting the energy generation and dissipation of the tracked vehicle. It has been found that the proportions of damping dissipation energy and road roughness caused energy consumption to total energy consumption are both higher at a greater speed.

2 August 2022 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Verified
Journal Article
Closed access
ZGZhiqiang Guo
Zhiqiang Guo
SZSihai Zhao
Sihai Zhao
JLJunlin Luo
Junlin Luo
In this paper, a longitudinal-vertical coupling dynamic model of a tracked vehicle under uneven road conditions is established. The torsion suspension forces and torques generated by the torsion bar springs and torsion shock absorbers are considered in the present model. The tracked vehicle’s longitudinal acceleration and velocity change at the same time as the vehicle heaves under the excitation of uneven road terrain. The vehicle’s longitudinal-vertical coupling dynamics are explained elementarily by analysing the longitudinal and vertical dynamics of a road wheel based on the road wheel force model. From the coupling tracked vehicle model, the dynamic responses of the vehicle in the vertical and pitch directions as well as the longitudinal direction are investigated. The vehicle dynamics characteristics are compared with those obtained by Recurdyn simulation. The results indicate that the proposed dynamic model performs well in predicting the dynamic characteristics of the tracked vehicle on uneven roads. By means of the coupling dynamic model, the influences of vehicle speed and road conditions on the vehicle’s longitudinal dynamics are further studied. It has been found that both a higher velocity and a larger roughness coefficient will lead to a negative longitudinal acceleration with larger absolute value.

25 July 2024 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Verified
Journal Article
Closed access
ZGZhiqiang Guo
Zhiqiang Guo
CLChunwang Liu
Chunwang Liu
HZHongxiu Zhu
Hongxiu Zhu
JLJunlin Luo
Junlin Luo
WWWei Wu
Wei Wu
In this paper, an energy computation method is proposed based on the longitudinal-vertical coupling tracked vehicle dynamic model to quantificationally study the energy generation and dissipation for tracked vehicles under off-road conditions. When the tracked vehicle drives on uneven road, the suspension damping components and the additional driving resistance caused by ground roughness consumes part of the driving power. The energy consumption distributions of the tracked vehicle under different speeds, different road conditions and different driving conditions are investigated and compared. The results indicate that a larger road roughness coefficient, a higher travelling speed and a greater driving force will make the proportions of energy consumed by the suspension dampers and the additional driving resistance to the total energy consumption larger. The influence of road conditions on the energy consumption distribution of the tracked vehicle takes precedence over the tracked vehicle speed and the effect of the driving force is internally due to speed changes.

2 September 2026 in Mathematics
Verified
Journal Article
Open access
PDF file
ZGZhiqiang Guo
Zhiqiang Guo
YHYulin Hu
Yulin Hu
YLYuwei Liu
Yuwei Liu
YYYihang Ye
Yihang Ye
Full-vehicle active suspension control requires coordinated regulation of ride comfort, body posture, suspension travel, tire road holding, and control effort. To improve the adaptability of fixed-weight MPC while retaining model-based interpretability, this paper proposes a TD3-MPC posture-feedback controller for a seven-degree-of-freedom full-vehicle active suspension system. The TD3 Actor is trained offline and deployed with fixed network parameters to generate five bounded actions for online MPC weight regulation rather than directly outputting actuator forces. The MPC layer calculates the constrained four-wheel baseline forces, after which posture feedback compensates for vehicle-body vertical, pitch, and roll responses. A composite reward balances body acceleration, suspension deflection, tire deformation, energy control, force variation, and action smoothness. The controller is evaluated through time-domain, frequency-domain, parameter-perturbation, ablation, and Monte Carlo analyses. Under the nominal Class-D Road condition at 20 m/s, it reduced the RMS values of body vertical, pitch, and roll angular accelerations by 13.24%, 4.77%, and 10.68%, respectively, and reduced control energy by 3.06% relative to fixed-weight MPC. Across 360 paired cases covering ISO Class-B-D roads and speeds of 10–25 m/s, the corresponding mean reductions were 9.55%, 6.30%, and 8.37%, respectively.

16 October 2024 in Machines
Verified
Journal Article
Open access
PDF file
ZGZhiqiang Guo
Zhiqiang Guo
JLJunlin Luo
Junlin Luo
YLYuwei Liu
Yuwei Liu
In this paper, a novel series hydraulic hybrid powertrain is proposed for a three-axis all-terrain vehicle. The engine drives two variable displacement pumps responsible for driving and steering, respectively. A variable displacement motor is connected to the ring gear of the planetary coupling mechanism to drive the vehicle and a fixed-displacement motor is connected to the sun gear to steer the vehicle. The active disturbance rejection control with feedforward control is employed to control the engine speed. The engine speed is controlled in a close-looped manner by adjusting the engine throttle. The controller parameters are decided by analyzing the influence of each parameter on the controller performance by means of the control variable method. The simulation results indicate that the proposed control strategy enables the vehicle to obtain better engine speed following and anti-disturbance performance. An all-terrain prototype is established and field tests are carried out to verify the effectiveness of the design and control strategy of the series hydraulic hybrid powertrain for the all-terrain vehicle.