Yuwei Liu

Dr. Yuwei Liu


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 March 2023 in Friction
Verified
Journal Article
Open access
PDF file
YLYuwei Liu
Yuwei Liu
YSYuanzhi Sun
Yuanzhi Sun
ZGZiyin Gao
Ziyin Gao
FYFuhao Ye
Fuhao Ye
PTPei Tang
Pei Tang
High temperatures are generated due to the sliding contacts between the rubbing surfaces of the friction clutch system. In this work, by considering the effective thermal contact conductance under sliding conditions, a simulation model of a two-dimensional transient temperature field of the clutch disc was developed. A numerical solution to obtain the surface temperature at different radii was presented based on the finite difference method. Compared with the experimental data, the proposed model for estimating the surface temperature is more accurate than the conventional prediction method. The results showed that the errors of the calculated temperatures at radii of 114 and 106 mm have obviously reduced by 12.98% and 12.60%, respectively. In addition, the influences of pressure and relative speed on the surface temperature were investigated. The temperature increases with the increase of the relative speed and pressure during the sliding period, and there is an interaction effect between pressure and speed on the surface temperature rise.

4 March 2021 in Materials
Verified
Journal Article
Open access
PDF file
YJYameng Ji
Yameng Ji
YYYanpeng Yuan
Yanpeng Yuan
WZWeizheng Zhang
Weizheng Zhang
YXYunqing Xu
Yunqing Xu
YLYuwei Liu
Yuwei Liu
In order to evaluate the elevated temperature creep performance of the ABOw/Al–12Si composite as a prospective piston crown material, the tensile creep behaviors and creep fracture mechanisms have been investigated in the temperatures range from 250 to 400 °C and the stress range from 50 to 230 MPa using a uniaxial tensile creep test. The creep experimental data can be explained by the creep constitutive equation with stress exponents of 4.03–6.02 and an apparent activation energy of 148.75 kJ/mol. The creep resistance of the ABOw/Al–12Si composite is immensely improved by three orders of magnitude, compared with the unreinforced alloy. The analysis of the ABOw/Al–12Si composite creep data revealed that dislocation climb is the main creep deformation mechanism. The values of the threshold stresses are 37.41, 25.85, and 17.36 at elevated temperatures of 300, 350 and 400 °C, respectively. A load transfer model was introduced to interpret the effect of whiskers on the creep rate of this composite. The creep test data are very close to the predicted values of the model. Finally, the fractographs of the specimens were analyzed by Scanning Electron Microscope (SEM), the fracture mechanisms of the composites at different temperatures were investigated. The results showed that the fracture characteristic of the ABOw/Al–12Si composite exhibited a macroscale brittle feature range from 300 to 400 °C, but a microscopically ductile fracture was observed at 400 °C. Additionally, at a low tensile creep temperature (300 °C), the plastic flow capacity of the matrix was poor, and the whisker was easy to crack and fracture. However, during tensile creep at a higher temperature (400 °C), the matrix was so softened that the whiskers were easily pulled out and interfacial debonding appeared.

26 January 2020 in Science Progress
Verified
Journal Article
Open access
PDF file
YLYuwei Liu
Yuwei Liu
FYFuhao Ye
Fuhao Ye
WZWeizheng Zhang
Weizheng Zhang
SZShujun Zhou
Shujun Zhou
In order to study the heat transfer characteristics between two rough surfaces of two contacting blocks with different bulk temperatures and sliding reciprocating motion, a two-dimensional heat transfer model was used to analyze the dimensionless average heat flux, considering thermal contact conductance. The results of a series simulations were presented, covering a wide range of operating parameters including dimensionless amplitude S~0 , dimensionless frequency ω~ , and measurements of interface conductance ξ . The results show that the dimensionless average heat flux increases with the increase of dimensionless frequency and amplitude, and the dimensionless average heat flux rises sharply in the low range of ξ and approaches to a steady state approximation when ξ>71,500 and S0>8 .

13 May 2025 in Materials
Verified
Journal Article
Open access
PDF file
YLYuwei Liu
Yuwei Liu
LYLiu Yuhui
Liu Yuhui
ZCZhengkun Cheng
Zhengkun Cheng
A three-dimensional (3D) analytical framework was developed to quantify stress concentration factors (SCFs) on engineering surfaces with arbitrary slight undulations, effectively addressing the limitations of existing two-dimensional (2D) models by rigorously integrating the effects of Poisson’s ratio (v) and surface texture directionality (θ). Initially, the 3D analytical solutions for single-notched specimens under uniaxial loading, which account for the v effect, were derived and compared with their 2D counterparts. The results demonstrate a clear positive correlation between v and SCFs. Subsequently, the framework was extended to single-layer undulating surfaces, revealing anisotropic stress modulation governed by θ. SCFs increase monotonically with θ, a directional sensitivity that 2D solutions are unable to represent. A parametric analysis of cosine-wave surfaces further identified a nonlinear accuracy dependency on the amplitude–frequency product (Af). Finite element method (FEM) validation showed that the relative errors are less than 5% when Af<0.05, and they rise to 14.8% when Af≈0.1. Furthermore, application to machined surfaces validated the superior accuracy of the 3D solution, achieving approximately 10% improvement compared to 2D methods with errors controlled within 5%. Significantly, the texture direction perpendicular to the loading direction results in notably higher SCFs than the parallel direction, directly correlating texture orientation with stress concentration severity. This study provides a robust theoretical basis for surface topography optimization in engineering applications, with validated reliability across geometric and material parameters.

16 October 2024 in Machines
Verified
Journal Article
Open access
PDF file
ZGZhiqiang Guo
Zhiqiang Guo
JLJunlin Luo
Junlin Luo
YLYuwei Liu
Yuwei Liu
In this paper, a novel series hydraulic hybrid powertrain is proposed for a three-axis all-terrain vehicle. The engine drives two variable displacement pumps responsible for driving and steering, respectively. A variable displacement motor is connected to the ring gear of the planetary coupling mechanism to drive the vehicle and a fixed-displacement motor is connected to the sun gear to steer the vehicle. The active disturbance rejection control with feedforward control is employed to control the engine speed. The engine speed is controlled in a close-looped manner by adjusting the engine throttle. The controller parameters are decided by analyzing the influence of each parameter on the controller performance by means of the control variable method. The simulation results indicate that the proposed control strategy enables the vehicle to obtain better engine speed following and anti-disturbance performance. An all-terrain prototype is established and field tests are carried out to verify the effectiveness of the design and control strategy of the series hydraulic hybrid powertrain for the all-terrain vehicle.

2 September 2026 in Mathematics
Verified
Journal Article
Open access
PDF file
ZGZhiqiang Guo
Zhiqiang Guo
YHYulin Hu
Yulin Hu
YLYuwei Liu
Yuwei Liu
YYYihang Ye
Yihang Ye
Full-vehicle active suspension control requires coordinated regulation of ride comfort, body posture, suspension travel, tire road holding, and control effort. To improve the adaptability of fixed-weight MPC while retaining model-based interpretability, this paper proposes a TD3-MPC posture-feedback controller for a seven-degree-of-freedom full-vehicle active suspension system. The TD3 Actor is trained offline and deployed with fixed network parameters to generate five bounded actions for online MPC weight regulation rather than directly outputting actuator forces. The MPC layer calculates the constrained four-wheel baseline forces, after which posture feedback compensates for vehicle-body vertical, pitch, and roll responses. A composite reward balances body acceleration, suspension deflection, tire deformation, energy control, force variation, and action smoothness. The controller is evaluated through time-domain, frequency-domain, parameter-perturbation, ablation, and Monte Carlo analyses. Under the nominal Class-D Road condition at 20 m/s, it reduced the RMS values of body vertical, pitch, and roll angular accelerations by 13.24%, 4.77%, and 10.68%, respectively, and reduced control energy by 3.06% relative to fixed-weight MPC. Across 360 paired cases covering ISO Class-B-D roads and speeds of 10–25 m/s, the corresponding mean reductions were 9.55%, 6.30%, and 8.37%, respectively.