Power transformers are the vital and expensive components of the power system. Timely identifying and diagnosing the transformer faults is critical to maintaining the stability of the power grid. As a sensitive and economical tool, the frequency response analysis (FRA) method has been widely employed to detect winding faults. However, it is still a challenge to accurately identify the fault types and degrees only by the FRA method. In this article, a new diagnosis method that combines the FRA method with a kernel-based extreme learning machine (KELM) optimized by a seagull optimization algorithm (SOA), is proposed to diagnose the fault types and degrees of the winding. First, a series of FRA tests are performed on a laboratory winding model under three different faults to obtain the FRA dataset. Furthermore, various numerical indices are applied to extract the characteristics of FRA signatures to train the SOA-KELM model. Then, the trained SOA-KELM model is utilized to classify fault types and degrees of the winding. Finally, the feasibility and superiority of SOA-KELM are verified by comparing with SOA optimized support vector machine (SOA-SVM) and random forest (SOA-RF), particle swarm optimization (PSO) algorithm optimized KELM (PSO-KELM), PSO-SVM, PSO-RF, SVM, RF, and KELM from the aspects of diagnosis accuracy and running time. The comprehensive comparison results show that SOA-KELM has the best diagnosis performance.
Multi-conductor transmission line (MTL) model of power transformer winding for frequency response analysis (FRA) has been successfully applied for the purpose of studying the characteristics of winding deformations. Most of the time it is considered that, at a frequency above 10 kHz, the flux does not penetrate the core, and the iron core losses due to hysteresis and eddy current can be neglected accordingly. However, in fact, there is still a little flux residing in the core, and it has a significant influence on inductances and resistances of transformer winding even up to approximately 1 MHz. In this paper, by introducing the anisotropic complex permeability of the lamination core into calculating inductances and resistances of the MTL model, a new MTL model considering the frequency-dependent property of the lamination core for FRA is presented. In addition, the accuracy and effectiveness of the MTL model are validated by means of a comparison between measured and emulated FRA results in a wide frequency range from 10 Hz up to 10 MHz. This precise MTL model of the transformer winding provides us a more objective and positive condition for simulation research of winding deformation detection.
Winding is one of the most important components in power transformers. Ensuring the health state of the winding is of great importance to the stable operation of the power system. To efficiently and accurately diagnose the disc space variation (DSV) fault degree of transformer winding, this paper presents a diagnostic method of winding fault based on the K-Nearest Neighbor (KNN) algorithm and the frequency response analysis (FRA) method. First, a laboratory winding model is used, and DSV faults with four different degrees are achieved by changing disc space of the discs in the winding. Then, a series of FRA tests are conducted to obtain the FRA results and set up the FRA dataset. Second, ten different numerical indices are utilized to obtain features of FRA curves of faulted winding. Third, the 10-fold cross-validation method is employed to determine the optimal k-value of KNN. In addition, to improve the accuracy of the KNN model, a comparative analysis is made between the accuracy of the KNN algorithm and k-value under four distance functions. After getting the most appropriate distance metric and k-value, the fault classification model based on the KNN and FRA is constructed and it is used to classify the degrees of DSV faults. The identification accuracy rate of the proposed model is up to 98.30%. Finally, the performance of the model is presented by comparing with the support vector machine (SVM), SVM optimized by the particle swarm optimization (PSO-SVM) method, and random forest (RF). The results show that the diagnosis accuracy of the proposed model is the highest and the model can be used to accurately diagnose the DSV fault degrees of the winding.
LZTO@C@La2O3 coated with composite protective layers with excellent electrochemical performance has been synthesized using a simple solid-state method.
Deep learning methods for fault diagnosis in transformer windings have drawn growing research interest in recent years. However, the scarcity of FRA fault data limits the application of deep learning in this field. To address this challenge, we propose a data augmentation model based on the diffusion model, namely, CDFF‐TW, to generate enough FRA fault data used in the field. First, this study designs a new input data format in the proposed model, which replaces traditional data preprocessing with the direct input of data. Moreover, the forward diffusion process of the proposed model is designed to be reusable, greatly reducing the overall training time compared to traditional diffusion models. Subsequently, a classifier is incorporated into the reverse diffusion process, and a screening component is designed to screen generated data based on the morphological similarity and the resonance peak similarity. Furthermore, a series of comparative tests is conducted. In addition, the model used the CDFF‐TW to augment data has better performance compared to existing models in transformer winding fault diagnosis. Finally, the optimal ratio of generated to original data is provided as a guideline for augmenting data in fault diagnosis models using the proposed method.
A novel SOI trench LDMOS with vertical double-RESURF is studied in this paper. A p-type silicon pillar is inserted beside the oxide trench as a vertical double RESURF layer, which can effectively modulate the electronic field and enhance the doping concentration in the drift region. The drain n+ region extends to the surface of buried oxide layer, shortening the motion-path in the high-resistance n- drift region for the carriers. A significantly optimized dependence of specific on-resistance on breakdown voltage is obtained.