An intelligent monitoring lubricant is essential for the development of smart machines because unexpected and fatal failures of critical dynamic components in the machines happen every day, threatening the life and health of humans. Inspired by the triboelectric nanogenerators (TENGs) work on water, we present a feasible way to prepare a self-powered triboelectric sensor for real-time monitoring of lubricating oils via the contact electrification process of oil–solid contact (O–S TENG). Typical intruding contaminants in pure base oils can be successfully monitored. The O–S TENG has very good sensitivity, which even can respectively detect at least 1 mg mL^–1 debris and 0.01 wt % water contaminants. Furthermore, the real-time monitoring of formulated engine lubricating oil in a real engine oil tank is achieved. Our results show that electron transfer is possible from an oil to solid surface during contact electrification. The electrical output characteristic depends on the screen effect from such as wear debris, deposited carbons, and age-induced organic molecules in oils. Previous work only qualitatively identified that the output ability of liquid can be improved by leaving less liquid adsorbed on the TENG surface, but the adsorption mass and adsorption speed of liquid and its consequences for the output performance were not studied. We quantitatively study the internal relationship between output ability and adsorbing behavior of lubricating oils by quartz crystal microbalance with dissipation (QCM-D) for liquid–solid contact interfaces. This study provides a real-time, online, self-powered strategy for intelligent diagnosis of lubricating oils.

Triboelectric nanogenerators (TENGs) have attracted great interests in the development of sustainable energies and intelligent society. However, a big challenge for TENGs in practical applications is the unavoidable external mechanical abrasion and/or contaminant adsorption on the triboelectric materials, which leads to the significant decrease of the durability of TENGs and is urgently needed to be addressed. There are already a series of interesting progresses on the topic of the TENGs’ durability. In this study, reviewing the durability of TENGs via both the advanced materials/structure designing and the novel surface/interface engineering is focused upon, which includes choosing basic TENG materials, improving composites performance, optimizing structures, and designing triboelectric surfaces and interfaces. To get a better understanding of the durability of TENGs in published studies, the quantifiable levels of service life are also summarized including operation cycles, time, friction coefficient, and wear loss of triboelectric materials, where the boosting mechanisms are also discussed and summarized. Finally, the challenges as well as key strategies toward high durable TENGs are presented.

Mesoporous carbon with embedded iron carbide nanoparticles was successfully synthesized via a facile impregnation–carbonization method. A green biomass resource, cotton fabric, was used as a carbon precursor and an iron precursor was implanted to create mesopores through a catalytic graphitization reaction. The pore structure of the nanocomposites can be tuned by adjusting the iron precursor loadings and the embedded iron carbide nanoparticles serve as an active component for magnetic separation after adsorption. The microstructure of the nanocomposites was carefully investigated by various characterization techniques including electron microscopy, X-ray diffraction, surface analyzer, magnetic property analyzer and etc. The newly created mesopores are demonstrated as a critical component to enhance the adsorption capacity of organic dyes and embedded iron carbide nanoparticles are responsible for the selective removal of heavy metal ions (Zn²⁺, Cu²⁺, Ni²⁺, Cr⁶⁺ and Pb²⁺). Isotherm adsorption, kinetic study at three different temperatures (25, 45 and 65 °C) and cycling retention tests were performed to understand the adsorptive behavior of the nanocomposites with organic dyes (methylene blue and methyl orange). Together with the preferable removal of more toxic heavy metal species (Cr⁶⁺ and Pb²⁺), these mesoporous nanocomposites show promising applications in pollutant removal from water. The facile material preparation allows convenient scale-up manufacturing with low cost and minimum environmental impact.