As the core technology of high-throughput satellite payloads, multibeam antennas have received high attention and rapid development in recent years. Because of the characteristics of high gain and high beam isolation, multiaperture multibeam antennas is an important technical approach to meet the high-performance requirements of high-throughput satellites. This article proposes a mathematical modeling method based on the mutual coupling parameters of the reflector. This method takes capacity requirements and satellite structure design boundary conditions as input condition, and adopts an adaptive evolutionary multiobjective optimization algorithm to perform joint optimization and solution of multiple parameters, which can complete the optimization efficiently. This method does not need to perform a large number of antenna parameter simulation, reduces the number of iterations and structural layout design, greatly reduces the design cost. This article takes the demand of the AP-6D satellite as an example, applies the above method to the multibeam antenna design of the satellite, and completes the simulation verification, structural design, physical manufacturing, and various tests of the antenna to verify the correctness of the design method.
6 November 2025 in IEEE Microwave and Wireless Technology Letters
This letter presents a highly compact $8\times 8~E$ -plane waveguide Butler matrix (BM) realized by three stacked metal plates. The proposed dual-layer layout with only two crossovers simplifies the structure and reduces the footprint. A rectangular waveguide (RW) BM is constructed accordingly, where phase consistency is ensured by several phase shifters with capacitive stubs, corrugations, and inductive steps. It can be easily fabricated by using $E$ -plane split-block machining. The prototype exhibits compact dimensions of $13.9\lambda \times 4.5\lambda \times 2.7\lambda $ at 18.95 GHz, which corresponds to an 89% volume reduction compared to a state-of-the-art $8\times 8$ RW BM. The measured average insertion loss (IL) of the BM is less than 0.34 dB in the K-band frequency range of 17.7–20.2 GHz, with return loss (RL) and isolation at the input ports better than 24 and 23.4 dB, respectively. It also has high-power handling capability, making it suitable for multiport power amplifiers (MPAs) in flexible multibeam satellite systems.
This paper proposes a circularly polarized (CP) antenna array featuring high aperture efficiency, a low in-band radar cross section (RCS), and a low profile. First, two different patch antenna elements are designed, which exhibit desirable CP performance and a 180° reflection phase difference under x-polarized normal incidence within the same operation band. These elements are then arranged in a chessboard configuration to simultaneously achieve high aperture efficiency and in-band RCS reduction under x-polarized normal incidence. Subsequently, the parasitic units are uniformly embedded into the array elements, which are employed to realize reflection phase cancellation with the array elements under y-polarization normal incidence. The simulated results show that the proposed array achieves a peak monostatic RCS reduction of 12.8 dB, and the 6 dB RCS reduction bandwidth fully covers the antenna’s operating bandwidth under both x- and y-polarized normal incidences. Moreover, the gain of the antenna array reaches 18.2 dBic at 3 GHz with an aperture efficiency of 58% and a profile of 0.03λ. A good agreement is obtained between the simulated and measured results. This design successfully combines the advantages of high aperture efficiency, dual-polarized in-band RCS reduction, and a low profile, making it highly valuable for aerospace satellite communications and unmanned aerial vehicle data links.
1 September 2026 in IEEE Antennas and Wireless Propagation Letters