This letter proposes a compact, dual-band, dual circularly-polarized shared-aperture antenna based on the structure reuse of a dielectric resonator (DR) structure. The proposed antenna reuses a smaller DR, originally designed for the high-band (HB) radiator, as the radiating structure for the low-band (LB). It incorporates a LB right-hand circularly polarized (RHCP) dielectric resonator antenna (DRA) and a HB left-hand circularly polarized (LHCP) DRA into a compact shared-aperture construction, attaining a high aperture reuse efficiency. The RHCP radiation in the LB is produced by the DR mode, and the LHCP radiation in the HB is produced by the combination of the patch mode and the DR mode. Two operating bands can be adjusted independently. Additionally, the cross-band port isolation is improved by using band-stop filtering decoupling technology. For verification, an antenna prototype with a transverse size of 0.59 λL ×0.59 λL is fabricated. Measured results show that the proposed antenna has a -10-dB impedance bandwidth of 17.5% and 11.8%, and a 3-dB AR bandwidth of 7.4% (RHCP) and 7.47% (LHCP). The measured cross-band port isolation of more than 33.2 and 31.3 dB are obtained in the LB and HB, respectively.
6 November 2025 in IEEE Microwave and Wireless Technology Letters
This letter presents a highly compact $8\times 8~E$ -plane waveguide Butler matrix (BM) realized by three stacked metal plates. The proposed dual-layer layout with only two crossovers simplifies the structure and reduces the footprint. A rectangular waveguide (RW) BM is constructed accordingly, where phase consistency is ensured by several phase shifters with capacitive stubs, corrugations, and inductive steps. It can be easily fabricated by using $E$ -plane split-block machining. The prototype exhibits compact dimensions of $13.9\lambda \times 4.5\lambda \times 2.7\lambda $ at 18.95 GHz, which corresponds to an 89% volume reduction compared to a state-of-the-art $8\times 8$ RW BM. The measured average insertion loss (IL) of the BM is less than 0.34 dB in the K-band frequency range of 17.7–20.2 GHz, with return loss (RL) and isolation at the input ports better than 24 and 23.4 dB, respectively. It also has high-power handling capability, making it suitable for multiport power amplifiers (MPAs) in flexible multibeam satellite systems.