The aim of this paper was to develop and verify a method for evaluating the high-performance milling of Inconel 718 alloy under accelerated tool wear conditions. The method considered parameters such as cutting-force components, total machine power consumption, cutting-edge wear, and material removal rate. The study compared high-feed milling and plunge milling, using sets of cutting parameters that are appropriate for both techniques. The results indicate that high-feed milling was more efficient, achieving higher material removal rates and lower tool wear. On the other hand, plunge milling was characterized by a lower axial force component (Fz), which can positively affect machining accuracy. The paper highlights that the proposed evaluation method can also be applied to other hard-to-machine materials, and plunge milling offers a competitive alternative for roughing operations in the milling of Inconel 718 alloy.
1 February 2017 in Archives of Civil and Mechanical Engineering
In order to ensure the undisturbed operation of gear transmissions, avoid their unplanned downtimes and secondary damage to them, their condition needs to be monitored and their failures need to be diagnosed. Currently, there is no commercial and universal diagnostic system for predictive analysis of gear wear. There are also no limit values of wear indicators defining individual causes of wear. The article presents problems related to various mechanisms of gear wear. Different methods of monitoring the condition of the gear are presented. They are presented. Thermal methods, analysis of wear residues, and measurements and analysis of vibrations and acoustic emissions are described. The usefulness of these techniques for predictive maintenance of gear movement is indicated. It is proposed to extend gear diagnostics by using machine learning methods to detect their faults, and in particular critical states of gear wear.