Combustion through detonation marks an important leap in efficiency over standard deflagration methods. This research introduces a Pulsed Detonation Combustor (PDC) model that uses Hydrogen as fuel and Oxygen as an oxidizer, specifically targeting carbon-free combustion efforts. The PDC aerodynamic features boost operating cycle frequency and facilitate Deflagration-to-Detonation Transition (DDT) within distances less than 200 mm by means of Hartmann–Sprenger resonators and cross-flow fuel/oxidizer injection. The achievement of quality mixing in a short-time filling process represents not only higher cycle operation but also enhanced performances. The scope of this paper is to assess the impact of different fuel injectors with different opening areas on the performances of the PDC. This assessment, expressed as a function of the Equivalence Ratio (ER), is conducted using two primary methods. Instantaneous static pressures are recorded and processed to extract the maximum and average cycle pressure and characterize the pressure augmentation. Thrust measurements obtained using a load cell are averaged over the detonation cycle to calculate the time-averaged thrust. The specific impulse is subsequently determined based on these thrust measurements and the corresponding mass flow data.

Pressure-gain combustion (PGC) represents a promising alternative to conventional propulsion systems for interplanetary travel due to its key advantages, including higher thermodynamic efficiency, increased specific impulse, and more compact engine designs. However, to elevate this technology to a sufficient technology readiness level (TRL) for practical application, extensive experimental validation, particularly under vacuum conditions, is essential. This study focuses on the performance of a pulsed-detonation combustor (PDC) under near-vacuum conditions, with two primary objectives: to assess the combustor’s ignition capabilities and to characterize the shock wave behavior at the exit plane. To achieve these objectives, high-frequency pressure sensors are strategically positioned within both the vacuum chamber and the combustor prototype to capture the pressure cycles during operation, providing insights into pressure augmentation over a period of approximately 0.5 s. Additionally, the Schlieren visualization technique is employed to analyze and interpret the flow structures of the exhaust jet. The combination of these experimental methods enables a comprehensive understanding of the ignition dynamics and the development of shock waves, contributing valuable data to advance PGC technology for space-exploration applications.