The accurate estimation of grassland vegetation parameters at a high spatial resolution is important for the sustainable management of grassland areas. Unmanned aerial vehicle (UAV) light detection and ranging (LiDAR) sensors with a single laser beam emission capability can rapidly detect grassland vegetation parameters, such as canopy height, fractional vegetation coverage (FVC) and aboveground biomass (AGB). However, there have been few reports on the ability to detect grassland vegetation parameters based on RIEGL VUX-1 UAV LiDAR (Riegl VUX-1) systems. In this paper, we investigated the ability of Riegl VUX-1 to model the AGB at a 0.1 m pixel resolution in the Hulun Buir grazing platform under different grazing intensities. The LiDAR-derived minimum, mean, and maximum canopy heights and FVC were used to estimate the AGB across the entire grazing platform. The flight height of the LiDAR-derived vegetation parameters was also analyzed. The following results were determined: (1) The Riegl VUX-1-derived AGB was predicted to range from 29 g/m² to 563 g/m² under different grazing conditions. (2) The LiDAR-derived maximum canopy height and FVC were the best predictors of grassland AGB (R² = 0.54, root-mean-square error (RMSE) = 64.76 g/m²). (3) For different UAV flight altitudes from 40 m to 110 m, different flight heights showed no major effect on the derived canopy height. The LiDAR-derived canopy height decreased from 9.19 cm to 8.17 cm, and the standard deviation of the LiDAR-derived canopy height decreased from 3.31 cm to 2.35 cm with increasing UAV flight altitudes. These conclusions could be useful for estimating grasslands in smaller areas and serving as references for other remote sensing datasets for estimating grasslands in larger areas.

A spaceborne microwave radiometer has a low spatial resolution limited by its antenna size. Enhancing the spatial resolution of data acquired by such sensors can improve the quality of subsequent applications. To improve the spatial resolution of the Microwave Radiation Imager (MWRI) onboard the Fengyun 3D satellite, this study used a Scatterometer Image Reconstruction (SIR) algorithm to generate resolution-enhanced swath brightness temperature data based on redundant information from overlaps between scanning points. These swath data have a higher pixel resolution that can reach 1/4 of the sampling frequency. The quality of reconstructed images, evaluated through visual comparison and quantitative analysis, revealed reasonable potential for providing more detailed depictions of surface information. Statistical analysis revealed a lower root mean square deviation of 0.8 K and a bias of 0.04 K following the SIR process. Analysis of the pixel spatial response function confirmed that the enhanced data have substantially finer spatial resolution than that of Level-1 data for 10–89 GHz vertical/horizontal channels, with an improvement of 9–39% in effective resolution. The findings of this study show that the SIR algorithm has potential for enhancing the quality of MWRI data and for widening the application domain to satellite product development, satellite data assimilation for numerical weather prediction, and other related fields.