Emission factors (EFs) of gaseous pollutants, particulate matter, certain harmful trace elements, and polycyclic aromatic hydrocarbons (PAHs) from three thermal power plants (TPPs) and semi-industrial fluidized bed boiler (FBB) were compared. EFs of particulate matter, trace elements (except Cd and Pb), benzo[a]pyrene, and benzo[b]fluoranthene exceed the upper limits specified in the EMEP inventory guidebook for all combustion facilities. The comparison of trace elements and PAHs content in fly ashes (FAs) from lignite and coal waste combustion in TPPs and FBB, respectively, as well as the potential environmental impact of FAs disposal, was performed by employing a set of ecological indicators such as crustal enrichment factor, risk assessment code, risk indices for trace elements, and benzo[a]pyrene equivalent concentration for PAHs. Sequential analysis shows that the trace elements portion is the lowest for water-soluble and exchangeable fractions. The highest enrichment levels in FAs are noticed for As and Hg. Based on toxic trace elements content, FAs from TPPs represent a very high ecological risk, whereas fly ash from FBB poses a moderate ecological risk but has the highest benzo[a]pyrene equivalent concentration, indicating its increased carcinogenic potential. Lead isotope ratios for Serbian coals and FAs can contribute to a lead pollution global database.

Exploring alternative options to address the impending global energy crisis while taking into account environmental concerns and climate change mitigation and addressing the sky-rocketing energy demand has become urgently essential. This need is further highlighted by the significant reliance of the Republic of Serbia on imported energy sources so that the focus of its energy sector strategy is rational use of energy resources, use of renewable energy sources (RES), and waste management with satisfying environmental regulations. The use of low-calorific and waste materials in conjunction with fluidized bed combustion technology is a method to achieve all the above goals synergistically. This paper presents experimental results of combustion of several solid wastes (coal mining waste from the ?RB Kolubara? complex, Serbia, paper sludge and hazelnut shells), conducted in an industrial prototype and experimental bubbling FB boiler (capacity up to 500 kW). Burning these wastes has a variety of advantages, including recovering substantial energy remaining in the waste and minimizing the overall waste volumes. The work focused on determination of furnace temperature profiles, composition of the flue gas at the furnace outlet as well as fluidization air and fuel flowrates, the minimum fluidization rate, fluidization number, maximum heat output and the transferred heat of the tested fuels. Based on the obtained results, potentials of FBC of waste fuels and the possibility of utilization of their energy potential are evaluated.

Nowadays, there is increasing global demand for activated carbon considering its wide usage as an adsorbent of environmental pollutants. Biowaste rich in lignocellulose, like the cone-like flowers of black alder (A_AC), shows promise as a precursor for novel materials. Building upon previous research and this material’s established applicability for removing cyanobacteria cells and cyanotoxins from water, this study investigates the CNOHS composition of A_AC and its potential to inhibit biofilm formation. A comprehensive CNOHS analysis showed the material composition as 64.5%, 1.77%, 28.83%, 2.05%, and 0.12% for C, N, O, H, and S respectively. The material’s efficacy in inhibiting biofilm formation across eight selected bacterial strains was evaluated. The results showed biofilm formation rates of 62.6%, 22.1%, 73.8%, 12.1%, 40.9%, 24.2%, 9.2%, and 7.6% for Escherichia coli, Pseudomonas aeruginosa, Enterobacter cloacae, Salmonella Typhimurium, Proteus mirabilis, Klebsiella pneumoniae, Acinetobacter baumannii, and Enterococcus faecalis, respectively. Biofilm formation is influenced by biotic and abiotic factors, especially the physicochemical properties of the substrate. This study offers insights into the potential of black-alder-derived activated carbon to prevent biofilm formation, highlighting its role in water purification and environmental protection.

The content of combustible elements in solid mineral fuels (carbon, hydrogen, etc.) are very important, since they most directly affect the heat value. It should be noted that the fuel heat value depends on many other constituents, such as ash and moisture. In this paper, special attention has been paid to carbon content. In solid mineral fuels, carbon is found alone or bound in the form of various compounds. One of them is mineral carbonate compounds bound as carbonate carbon, which originates from absorbed CO2 from atmosphere. Determination of carbonate carbon content of solid mineral fuels was performed by standard gravimetric method (according to ISO 925: 2019), and newly developed instrumental method, using thermogravimetric analyzer LECO TGA 701. Comparison of obtained experimental results was done. Four types of coal, Kolubara lignite, Kostolac lignite, brown coal, and control coal sample were included in experimental analysis. In addition, moisture in the samples was also determined using analytical method and inspected using LECO TGA 701 thermogravimetric analyzer, as well as total carbon content using the LECO CHN 628 elemental analyzer. An analysis and comparison of the obtained results was performed, and comments and conclusions are presented. The experiments were done in the department for fuel characterization, Laboratory for Thermal Engineering and Energy, Institute of Nuclear Sciences Vinca.