Harmonization of environmental protection and the growing energy needs of modern society promote the biomass application as a replacement for fossil fuels and a viable option to mitigate the green house gas emissions. For domestic conditions this is particularly important as more than 60% of renewables belongs to biomass. Beside numerous benefits of using biomass for energy purposes, there are certain drawbacks, one of which is a possible high emission of NOx during the combustion of these fuels. The paper presents the results of the experiments with multiple biomass types (soybean straw, cornstalk, grain biomass, sunflower oil, glycerin and paper sludge), using different combustion technologies (fluidized bed and cigarette combustion), with emphasis on the emission of NOx in the exhaust gas. A presentation of the experimental installations is given, as well as an evaluation of the effects of the fuel composition, combustion regimes and technology on the NOx emissions. As the biomass combustion took place at temperatures low enough that thermal and prompt NOx can be neglected, the conclusion is the emissions of nitrogen oxides primarily depend on the biomass composition- it is increasing with the increase of the nitrogen content, and decreases with the increase of the char content which provides catalytic surface for NOx reduction by CO.
1 July 2009 in International Journal of Heat and Mass Transfer
Based on investigations of ash deposit formation, semi-empirical indicators for slagging and fouling, based on ash chemical composition and its fusion temperature, have been determined. These criteria-indicators, in suggested limits, describe the coals on which they are based (North-American and British) well. However, the experience in the thermal power production sector of Serbia shows that their literal application to domestic coals does not produce satisfactory results. This contribution provides an analysis of applicability and the choice of criteria that are suitable for Serbian coals. The focus of the contribution is on coal slagging indicators, since slagging has much heavier consequences on heat transfer inside the steam boiler, and on boiler operation as a whole. The basis for the analysis of chosen criteria comprises of the results of investigations of four coal fields - Kostolac, Kolubara, Kosovo (Serbia), and Ugljevik (Bosnia and Herzegovina).
Exploring alternative options to address the impending global energy crisis while taking into account environmental concerns and climate change mitigation and addressing the sky-rocketing energy demand has become urgently essential. This need is further highlighted by the significant reliance of the Republic of Serbia on imported energy sources so that the focus of its energy sector strategy is rational use of energy resources, use of renewable energy sources (RES), and waste management with satisfying environmental regulations. The use of low-calorific and waste materials in conjunction with fluidized bed combustion technology is a method to achieve all the above goals synergistically. This paper presents experimental results of combustion of several solid wastes (coal mining waste from the ?RB Kolubara? complex, Serbia, paper sludge and hazelnut shells), conducted in an industrial prototype and experimental bubbling FB boiler (capacity up to 500 kW). Burning these wastes has a variety of advantages, including recovering substantial energy remaining in the waste and minimizing the overall waste volumes. The work focused on determination of furnace temperature profiles, composition of the flue gas at the furnace outlet as well as fluidization air and fuel flowrates, the minimum fluidization rate, fluidization number, maximum heat output and the transferred heat of the tested fuels. Based on the obtained results, potentials of FBC of waste fuels and the possibility of utilization of their energy potential are evaluated.