Robert scott Frazier

Dr. Robert scott Frazier

orcid

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 October 2021 in Energies
Verified
Journal Article
Open access
PDF file
AOAngelika Sita Ouedraogo
Angelika Sita Ouedraogo
RFRobert scott Frazier
Robert scott Frazier
AKAjay Kumar
Ajay Kumar
Disposal of municipal solid wastes (MSW) remains a challenge to minimize its impacts on the environment and human health. Landfilling, currently the most common method used for MSW disposal, occupies land space and leads to soil and air emissions. Gasification, an alternative MSW disposal method, can convert waste to energy, but can also lead to soil and air emissions and is a more extensive operation. In this study, life cycle assessments (LCA) of the two disposal methods (landfilling without energy recovery and gasification) were compared to understand impacts on environment and health. The LCA was conducted following the ISO 14040 standards with one ton of MSW as the functional unit. The life cycle inventory was obtained from published journals, technical reports, LandGEM, HELP and GREET database. The impact assessment was done using TRACI 2.1 and categorized into eight groups. The LCA revealed that landfilling is a higher contributor in global warming, acidification, smog formation, eutrophication, ecotoxicity and human health cancer and non-cancer categories. The negative environmental impacts of MSW landfilling can be primarily attributed to the fate of leachate loss and landfill gas, while those of the MSW gasification can be attributed to the disposal of its solid residues.

15 January 2015 in Energies
Verified
Journal Article
Open access
PDF file
RFRobert scott Frazier
Robert scott Frazier
EJEnze Jin
Enze Jin
AKAjay Kumar
Ajay Kumar
Biomass gasification has the potential to produce renewable fuels, chemicals and power at large utility scale facilities. In these plants catalysts would likely be used to reform and clean the generated biomass syngas. Traditional catalysts are made from transition metals, while catalysts made from biochar are being studied. A life cycle assessment (LCA) study was performed to analyze the sustainability, via impact assessments, of producing a metal catalyst versus a dedicated biochar catalyst. The LCA results indicate that biochar has a 93% reduction in greenhouse gas (GHG) emissions and requires 95.7% less energy than the metal catalyst to produce. The study also estimated that biochar production would also have fewer impacts on human health (e.g., carcinogens and respiratory impacts) than the production of a metal catalyst. The possible disadvantage of biochar production in the ecosystem quality is due mostly to its impacts on agricultural land occupation. Sensitivity analysis was carried out to assess environmental impacts of variability in the two production systems. In the metal catalyst manufacture, the extraction and production of nickel (Ni) had significant negative effects on the environmental impacts. For biochar production, low moisture content (MC, 9%) and high yield type (8 tons/acre) switchgrass appeared more sustainable.

11 November 2024 in Environments
Verified
Journal Article
Open access
PDF file
AOAngelika Sita Ouedraogo
Angelika Sita Ouedraogo
AKAjay Kumar
Ajay Kumar
RFRobert scott Frazier
Robert scott Frazier
Khaled A. SallamKhaled A. Sallam
Khaled A. Sallam
Municipal solid waste (MSW) generation continues to increase exponentially, leading to the need for better disposal methods. Approximately 50% of the MSW is landfilled in the United States (US). Landfilling is known for its negative effects on the environment and human health. The objective of this study was to conduct a life cycle assessment (LCA) of some of the most common waste treatment methods and propose an alternative and environmentally friendly integrated waste management method (IWM). The LCA was conducted using OpenLCA. Replacing landfilling, incineration, and composting with recycling, gasification, and anaerobic digestion (IWM) reduced the global warming potential from 899 kg CO2 eq to −14.6 kg CO2 eq. The same trend was observed for acidification (from 0.21 kg SO2 eq to −1.1 kg SO2 eq), ecotoxicity (from 2363.8 CTUe to 1.22 CTUe), eutrophication (from 0.5 kg N eq to 0.3 kg N eq), smog formation (from 4.4 kg O3 eq to 1.85 kg O3 eq), ozone depletion (from 2.1 × 10−5 kg CFC-11 eq to 0 kg CFC-11 eq), respiratory effects (from 2.8 × 10−3 kg PM2.5 eq to −7.25 × 10−3 kg PM2.5 eq), cancer (from 2 × 10−5 CTUh to 1.2 × 10−7 CTUh), and non-cancer effects (from 6 × 10−5 to 1.4 × 10−5 CTUh). The results show that an integrated waste management approach with recycling, gasification, and anaerobic digestion can dramatically reduce the environmental and health impacts of municipal solid waste disposal. Policy reforms, technical innovation, economic investment, and social engagement are needed to change waste management paradigm.

1 February 2019 in Agriculture
Verified
Journal Article
Open access
PDF file
DHDivya Handa
Divya Handa
RFRobert scott Frazier
Robert scott Frazier
Saleh TaghvaeianSaleh Taghvaeian
Saleh Taghvaeian
JWJason G. Warren
Jason G. Warren
Irrigation pumping is a major expense of agricultural operations, especially in arid/semi-arid areas that extract large amounts of water from deep groundwater resources. Studying and improving pumping efficiencies can have direct impacts on farm net profits and on the amount of greenhouse gases (GHG) emitted from pumping plants. In this study, the overall pumping efficiency (OPE), the GHG emissions, and the costs of irrigation pumping were investigated for electric pumps extracting from the Rush Springs (RS) aquifer in central Oklahoma and the natural gas-powered pumps tapping the Ogallala (OG) aquifer in the Oklahoma Panhandle. The results showed that all electric plants and the majority of natural gas plants operated at OPE levels below achievable standard levels. The total emission from the plants in the OG region was 49% larger than that from plants in the RS region. However, the emission per unit irrigated area and unit total dynamic head of pumping was 4% smaller for the natural gas plants in the OG area. A long-term analysis conducted over the 2001–2017 period revealed that 34% and 19% reductions in energy requirements and 52% and 20% decreases in GHG emissions can be achieved if the OPE were improved to achievable standards for plants in the RS and OG regions, respectively.


1 January 2008 in Energy Engineering
Verified
Journal Article
Closed access
RFRobert scott Frazier
Robert scott Frazier
Bandwidth energy screening (BES) methodology is a tool that plant engineers can use to identify and select energy management opportunities. The BES tool highlights processes that personnel may have overlooked while trying to lower energy usage costs. The impetus for this research came about as a result of observing plant personnel selecting energy management projects over hundreds of energy audits. These energy project selections are often based on the perceived efficiency of the energy usage of a particular process. There is an opportunity to more systematically select areas for improvement. Essentially, the BES methodology is a screening technique for applying energy management to manufacturing processes. This article describes a brief background on the use of bandwidth methodology and decision science in energy management and then uses an example to illustrate. Essentially, BES gives the plant manager an understanding of the energy use of individual processes at a systems level and then uses a quantitative means for the identification of candidate energy improvement projects. This article demonstrates the first law (thermodynamic) analysis in the form of energy bandwidths and selection processes. Once the BES analysis is performed, the sub- processes with potential for energy conservation are highlighted and may be ranked or otherwise selected by the engineer and management for action. This methodology is the front end of a more comprehensive methodology (exergy ratio diagnostic method) that includes second law analysis; however; the entire methodology is not presented in this article.