The bilateral filter exhibits remarkable efficacy in noise suppression and edge preservation. This article proposes a hardware architecture based on field-programmable gate array (FPGA) for a modified bilateral filter. To enhance the efficacy of the bilateral filter, the Gaussian-Adaptive Bilateral Filter (GABF) is employed as a modified filtering method. Approximating the filter weights using look-up tables (LUTs) results in reduced storage requirements and eliminates the need for complex exponential weight calculations. Moreover, the GABF is markedly accelerated by the highly parallel functional modules and LUTs. In addition to the aforementioned features, the GABF is implemented as a parallel architecture, which results in a reduction in hardware resource utilization compared to previous works. The results of the image quality analysis demonstrate that this article can achieve superior image quality compared with state-of-the-art works. The implementation results indicate that the proposed architecture is capable of performing real-time denoising at a frame rate of 95.65 fps for a 640 × 480 video with a power dissipation of 93.22 mW.
A blackbody cavity is developed for continuously measuring the temperature of molten steel, which consists of a cylindrical outer tube with a flat bottom, a coaxial inner tube, and an aperture diaphragm. The ray-tracing approach based on the Monte Carlo method was applied to calculate the effective emissivity for the nonisothermal cavity with a diffuse wall. The influence of the wall temperature distribution on the spectral and total effective emissivity was studied for various cavity geometrical parameters. For a practical blackbody cavity of the temperature sensor used in the tundish, the average spectral effective emissivity was calculated and verified. Our results will help optimize the novel sensor design and use it better for measuring the temperature of molten steel.
A blackbody cavity is developed for continuously measuring the temperature of molten steel, which consists of a cylindrical outer tube with a flat bottom, a coaxial inner tube, and an aperture diaphragm. The ray-tracing approach based on the Monte Carlo method was applied to calculate the effective emissivity for the isothermal cavity with the diffuse walls. And the dependences of the effective emissivity on the inner tube relative length were calculated for various inner tube radii, outer tube lengths, and wall emissivities. Results indicate that the effective emissivity usually has a maximum corresponding to the inner tube relative length, which can be explained by the impact of the inner tube relative length on the probability of the rays absorbed after two reflections. Thus, these results are helpful to the optimal design of the blackbody cavity.
31 December 2024 in International Journal of Computer Assisted Radiology and Surgery