1 September 2017 in Infrared Physics & Technology
18 December 2023 in IEEE Transactions on Instrumentation and Measurement
Gas-solid flows with non-uniform phase distribution and varying moisture often exist in the industrial process. Its solid concentration measurement is an important and challenging research field and new effective measurement methods are needed. In this study, a novel method using the microwave resonant cavity sensor is proposed to measure solid concentration of gas-solid two-phase flow with varying moisture. The sensor is developed from a cylindrical resonant cavity with open ends, and the orthogonal experiment is carried out using simulation method to determine the resonant mode and optimize the sensor configuration. Afterward, experiments are conducted to evaluate the performance of the designed sensor and the proposed method. The sensor has a high and nearly constant sensitivity to the solid concentration and its output is almost not affected by the non-uniform phase distribution. The varying moisture brings effect to solid concentration measurement when the proposed sensor is used. To solve this problem, the new parameter named normalized resonant frequency is defined to reduce this influence and finally the solid concentration measurement is achieved.
9 November 2024 in Scientific Reports
To achieve the desired superheat of molten steel during the continuous casting process, optimization of process parameters such as molten steel temperature in ladle furnace, casting speed, and baking temperature is necessary. Therefore, obtaining the superheat corresponding to these process parameters in advance is particularly important. To address this issue, a model for predicting the temperature of molten steel in the tundish during continuous casting is designed. The model adopts a combined modeling approach of mechanistic model and data model. To address the issue of the mechanism model’s inability to capture the variation of the lining’s thermal parameters, this article improves the traditional physics-informed neural network (PINN) algorithm. It combines the constraints from both the forward and inverse problems, allowing for obtaining solutions to the equations while capturing the variation of equation parameters. Actual data from multiple casting sequences at a steel plant are collected to validate the accuracy and interpretability of the model. The results show that the error of the model is about 2.1k which has better accuracy compared to pure mechanistic model and pure data model. Additionally, it can capture the variation patterns of tundish lining thermal parameters under different operating conditions. Therefore, the model designed in this article can provide both profound physical interpretation ability and more practical predictions of molten steel temperature.
25 November 2022 in IEEE Transactions on Instrumentation and Measurement
In gas-solid two-phase flow, the situation that the moisture in the solid changes is often encountered. The varying and unknown moisture brings new challenges to the solid concentration measurement if the used measurement method is sensitive to the moisture. In this study, a new method which can eliminate the influence of moisture on the measurement of solid concentration in gas-solid flows is proposed. Firstly, the new combined sensors consisting of the microwave transmission sensor and the capacitance sensor are proposed and the measurement systems are designed. The microwave transmission sensor and the capacitance sensor are both sensitive to the moisture and the solid concentration, and they can acquire the information of the solid concentration and the moisture simultaneously. Then an effective decoupling method is proposed to derive the moisture and the solid concentration from the information acquired by the microwave transmission sensor and the capacitance sensor. Experiments are carried out to simulate the flow structure of roping flow to verify the proposed method. The results indicate that the influence of moisture on the measurement of solid concentration can be eliminated, and moisture independent measurement of solid concentration in gas-solid flows can be realized.