This paper theoretically and experimentally studies the effect of underwater waveguide interface scattering on the nonlinear sound field characteristics of parametric array (PA) radiation. Based on the image source method, the components of the sound field in the waveguide are first analyzed. Then, a non-paraxial model is developed to account for the influence of interface scattering. This model enables accurate calculation of the wide-angle sound field. The impact of the sound source depth and the interface reflection coefficient on the distribution of the difference-frequency wave (DFW) sound field in the waveguide is studied. The interface alters the phase distribution of the DFW’s virtual source density function, thereby affecting the sound field accumulation process. Waveguide interfaces with different absorption coefficients influence the amplitude oscillation caused by interface reflection and change the sidelobe size of the DFW beam. The DFW sound field distribution is measured at three typical frequencies. Simulation and experimental results show that the attenuation of the DFW’s axial sound pressure level in the waveguide oscillates, and the DFW’s beamwidth gradually widens as the frequency decreases. The calculated results from the proposed model agree well with the measured data, with average errors along the sound axis and depth being less than 3 dB and 6 dB, respectively. This demonstrates the model’s superior applicability compared to the existing free-field model.
In the ocean, bubbles rarely appear alone and are often not evenly distributed, which makes it complicated to predict the effect of ocean bubbles on sound propagation. To solve this problem, researchers have tried to use approximations such as equivalent and multiple scattering models, but these approximations are accompanied by large errors. Therefore, we propose a semi-numerical and semi-analytical calculation method for underwater sound fields containing non-homogeneous bubbles in this paper. Based on the attenuation cross section and scattering cross section of a single bubble, the non-homogeneous medium is divided into multiple layers of uniform medium. Each layer of the bubble group is regarded as a whole, which can fully reflect the influence of bubble group vibration and scattering on sound wave propagation and is conducive to faster calculation of the sound field of non-homogeneous bubbly liquids. Compared with the classic coupling model, the calculation process of this method is simpler and faster, which solves the problem of fast calculation of sound fields in bubbly liquids and simulation of distributed bubble groups containing non-homogeneous distributed bubbles.
19 December 2024 in Journal of Theoretical and Computational Acoustics