This paper theoretically and experimentally studies the effect of underwater waveguide interface scattering on the nonlinear sound field characteristics of parametric array (PA) radiation. Based on the image source method, the components of the sound field in the waveguide are first analyzed. Then, a non-paraxial model is developed to account for the influence of interface scattering. This model enables accurate calculation of the wide-angle sound field. The impact of the sound source depth and the interface reflection coefficient on the distribution of the difference-frequency wave (DFW) sound field in the waveguide is studied. The interface alters the phase distribution of the DFW’s virtual source density function, thereby affecting the sound field accumulation process. Waveguide interfaces with different absorption coefficients influence the amplitude oscillation caused by interface reflection and change the sidelobe size of the DFW beam. The DFW sound field distribution is measured at three typical frequencies. Simulation and experimental results show that the attenuation of the DFW’s axial sound pressure level in the waveguide oscillates, and the DFW’s beamwidth gradually widens as the frequency decreases. The calculated results from the proposed model agree well with the measured data, with average errors along the sound axis and depth being less than 3 dB and 6 dB, respectively. This demonstrates the model’s superior applicability compared to the existing free-field model.
The application of multiple parametric arays (MPAs) has been increasingly prominent in recent years due to the high directivity of parametric arrays. However, existing beamforming methods for MPAs are limited to special scenarios, such as narrow-edged beamforming, or have high complexity, such as requiring numerous acoustic transfer function (ATF) identifications. This paper proposes a low-complexity versatile beamforming method based on the transitive relationship among ATFs. For N parametric arrays, the number of identified ATFs can be reduced from N2 to N through interpolation and flipping. Moreover, by neglecting the less affected part in the acoustic field structure, the number of identified ATFs can be reduced to less than N. On the basis of ATF matrix estimated, the desired acoustic field can be generated by optimizing the emission weight coefficient. The accuracy of ATF estimation is verified through the precise reconstruction of the acoustic field. Even when the number of identified ATFs does not exceed N, the desired acoustic field of different types of beam patterns can be formed correctly. The beamforming effects of MPAs confirm the low-complexity and versatility of the proposed method, offering a highly feasible solution for acoustic field control.
14 September 2026 in Mechanical Systems and Signal Processing