This note is concerned with a new controller design problem for networked systems with random communication delays. Two kinds of random delays are simultaneously considered: i) from the controller to the plant, and ii) from the sensor to the controller, via a limited bandwidth communication channel. The random delays are modeled as a linear function of the stochastic variable satisfying Bernoulli random binary distribution. The observer-based controller is designed to exponentially stabilize the networked system in the sense of mean square, and also achieve the prescribed H/sub /spl infin// disturbance attenuation level. The addressed controller design problem is transformed to an auxiliary convex optimization problem, which can be solved by a linear matrix inequality (LMI) approach. An illustrative example is provided to show the applicability of the proposed method.
15 March 2019 in IEEE Transactions on Industrial Informatics
Industrial cyber-physical systems (CPSs) are large-scale, geographically dispersed, and life-critical systems, in which lots of sensors and actuators are embedded and networked together to facilitate real-time monitoring and closed-loop control. Their intrinsic features in geographic space and resources put forward to urgent requirements of reliability and scalability for designed filtering or control schemes. This paper presents a review of the state-of-the-art of distributed filtering and control of industrial CPSs described by differential dynamics models. Special attention is paid to sensor networks, manipulators, and power systems. For real-time monitoring, some typical Kalman-based distributed algorithms are summarized and their performances on calculation burden and communication burden, as well as scalability, are discussed in depth. Then, the characteristics of non-Kalman cases are further disclosed in light of constructed filter structures. Furthermore, the latest development is surveyed for distributed cooperative control of mobile manipulators and distributed model predictive control in industrial automation systems. By resorting to droop characteristics, representative distributed control strategies classified by controller structures are systematically summarized for power systems with the requirements of power sharing and voltage and frequency regulation. In addition, distributed security control of industrial CPSs is reviewed when cyber-attacks are taken into consideration. Finally, some challenges are raised to guide the future research.
9 July 2007 in IEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics)
In this paper, the robust Hinfin control problem Is considered for a class of networked systems with random communication packet losses. Because of the limited bandwidth of the channels, such random packet losses could occur, simultaneously, in the communication channels from the sensor to the controller and from the controller to the actuator. The random packet loss is assumed to obey the Bernoulli random binary distribution, and the parameter uncertainties are norm-bounded and enter into both the system and output matrices. In the presence of random packet losses, an observer-based feedback controller is designed to robustly exponentially stabilize the networked system in the sense of mean square and also achieve the prescribed Hinfin disturbance-rejection-attenuation level. Both the stability-analysis and controller-synthesis problems are thoroughly investigated. It is shown that the controller-design problem under consideration is solvable if certain linear matrix inequalities (LMIs) are feasible. A simulation example is exploited to demonstrate the effectiveness of the proposed LMI approach.
1 December 2009 in IEEE Transactions on Neural Networks
In this paper, the problem of stochastic synchronization analysis is investigated for a new array of coupled discrete-time stochastic complex networks with randomly occurred nonlinearities (RONs) and time delays. The discrete-time complex networks under consideration are subject to: (1) stochastic nonlinearities that occur according to the Bernoulli distributed white noise sequences; (2) stochastic disturbances that enter the coupling term, the delayed coupling term as well as the overall network; and (3) time delays that include both the discrete and distributed ones. Note that the newly introduced RONs and the multiple stochastic disturbances can better reflect the dynamical behaviors of coupled complex networks whose information transmission process is affected by a noisy environment (e.g., Internet-based control systems). By constructing a novel Lyapunov-like matrix functional, the idea of delay fractioning is applied to deal with the addressed synchronization analysis problem. By employing a combination of the linear matrix inequality (LMI) techniques, the free-weighting matrix method and stochastic analysis theories, several delay-dependent sufficient conditions are obtained which ensure the asymptotic synchronization in the mean square sense for the discrete-time stochastic complex networks with time delays. The criteria derived are characterized in terms of LMIs whose solution can be solved by utilizing the standard numerical software. A simulation example is presented to show the effectiveness and applicability of the proposed results.