Every year, thousands of people undergo amputations due to trauma or medical conditions. The loss of an upper limb, in particular, has profound physical and psychological consequences for patients. One potential solution is the use of externally powered prostheses equipped with motorized artificial hands. However, these commercially available prosthetic hands are prohibitively expensive for most users. In recent years, advancements in 3D printing and sensor technologies have enabled the design and production of low-cost, externally powered prostheses. This paper presents a pattern-recognition-based human–prosthesis interface that utilizes surface electromyography (sEMG) signals, captured by an affordable device, the Myo armband. A Support Vector Machine (SVM) algorithm, optimized using Bayesian techniques, is trained to classify the user’s intended grasp from among nine common grasping postures essential for daily life activities and functional prosthetic performance. The proposal is viable for real-time implementations on low-cost platforms with 85% accuracy in grasping posture recognition.

The design and control of artificial hands remains a challenge in engineering. Popular prostheses are bio-mechanically simple with restricted manipulation capabilities, as advanced devices are pricy or abandoned due to their difficult communication with the hand. For social robots, the interpretation of human intention is key for their integration in daily life. This can be achieved with machine learning (ML) algorithms, which are barely used for grasping posture recognition. This work proposes an ML approach to recognize nine hand postures, representing 90% of the activities of daily living in real time using an sEMG human–robot interface (HRI). Data from 20 subjects wearing a Myo armband (8 sEMG signals) were gathered from the NinaPro DS5 and from experimental tests with the YCB Object Set, and they were used jointly in the development of a simple multi-layer perceptron in MATLAB, with a global percentage success of 73% using only two features. GPU-based implementations were run to select the best architecture, with generalization capabilities, robustness-versus-electrode shift, low memory expense, and real-time performance. This architecture enables the implementation of grasping posture recognition in low-cost devices, aimed at the development of affordable functional prostheses and HRI for social robots.

In the field of biomechanical modeling, the development of a prosthetic hand with dexterity comparable to the human hand is a multidisciplinary challenge involving complex mechatronic systems, intuitive control schemes, and effective body interfaces. Most current commercial prostheses offer limited functionality, typically only one or two degrees of freedom (DoF), resulting in reduced user adoption due to discomfort and lack of functionality. This research aims to design a computationally efficient low-level control algorithm for prosthetic hand fingers to be able to (a) accurately manage finger positions, (b) anticipate future information, and (c) minimize power consumption. The methodology employed is known as model-based predictive control (MBPC) and starts with the application of linear identification techniques to model the system dynamics. Then, the identified model is used to implement a generalized predictive control (GPC) algorithm, which optimizes the control effort and system performance. A test bench is used for experimental validation, and the results demonstrate that the proposed control scheme significantly improves the prosthesis’ dexterity and energy efficiency, enhancing its potential for daily use by people with hand loss.