Groundwater monitoring is fundamental for aquifer management and hydrogeological studies. Systems that can obtain reliable, long-term information to detect nonlinear and nonseasonal variations are primarily required. However, existing solutions (both commercial and research-oriented) have certain limitations, such as high installation or operating costs, closed architectures, and the need for periodic site visits, all of which limit or prevent their general application in long-term monitoring campaigns in remote locations.,This paper presents the design and field validation of a low-power NB-IoT-based piezometric monitoring system for groundwater levels. The system integrates a submersible pressure sensor, an embedded ESP32-based controller, wireless transmission via an NB-IoT network, energy management, and a cloud platform for data storage and visualization.,The developed system was evaluated in a groundwater observation well for 63 days. The collected data were used to assess short-term variability, daily stability, temporal consistency, communication reliability, and energy consumption under real operating conditions.,Results showed stable system performance, with a maximum daily standard deviation below 2.1 cm (less than 4% of the total observed range), no evidence of progressive drift in recorded measurements, and data availability exceeding 97%. Energy analysis revealed a duty-cycled operation with an average consumption of approximately 670.9 mWh day⁻¹, enabling an estimated autonomy of 25–30 days using a 5000 mAh battery.,Overall, the proposed system demonstrates reliable, low-power, and scalable operation under real field conditions, supporting its application in long-term groundwater monitoring and distributed sensor networks.