The downstream processing of hot-melt extruded amorphous solid dispersions (ASDs) into tablets is challenging due to the low tabletability of milled ASDs. Typically, the extrudate strand is sized before milling, as the strand cannot be fed directly into the milling system. At the lab scale, the strand can be sized by hand-cutting before milling. For scaling up, pelletizers or chill roll and flaker systems can be used to break strands. Due to the different techniques used, differences in milling and tablet compaction are to be expected. We present a systematic study of the milling and tableting of an extruded ASD of itraconazole with hypromellose acetate succinate (HPMCAS) as a carrier polymer. The strand was sized using different techniques at the end of the extruder barrel (hand-cutting, pelletizer, or chill roll and flaker) before being milled at varying milling speeds with varying screen sizes. The effects of these variables (sizing technology, milling speed, and screen size) on the critical quality attributes (CQAs) of the milled ASD, such as yield, mean particle size (D50), tablet compaction characteristics, and tablet dissolution, were established using response surface methodology. It was found that the CQAs varied according to sizing technology, with chill roll flakes showing the highest percentage yield, the lowest D50, and the highest tabletability and dissolution rate for itraconazole. Pearson correlation coefficient tests indicated D50 as the most important CQA related to tabletability and dissolution. For certain milling conditions, the milling of hand-cut filaments results in similar particle size distributions (PSDs) to the milling of pellets or chill roll flakes.

Continuous manufacturing is becoming the new technological standard in the pharmaceutical industry. In this work, a twin-screw processor was employed for the continuous production of liquisolid tablets containing either simethicone or a combination of simethicone with loperamide hydrochloride. Both active ingredients present major technological challenges, as simethicone is a liquid, oily substance, and loperamide hydrochloride was used in a very small amount (0.27% w/w). Despite these difficulties, the use of porous tribasic calcium phosphate as a carrier and the adjustment of the settings of the twin-screw processor enabled the optimization of the characteristics of the liquid-loaded powders and made it possible to efficiently produce liquisolid tablets with advantages in physical and functional properties. The application of chemical imaging by means of Raman spectroscopy allowed for the visualization of differences in the distribution of individual components of the formulations. This proved to be a very effective tool for identifying the optimum technology to produce a drug product.

Background/Objectives: Amorphization of an active pharmaceutical ingredient (API) can improve its dissolution and enhance bioavailability. Avoiding solvents for drug amorphization is beneficial due to environmental issues and potential solvent residues in the final product. Methods: Dry amorphization using a twin-screw extruder is presented in this paper. A blend of mesoporous silica particles and crystalline itraconazole was processed using a pharma-grade laboratory scale twin-screw extruder. The influence of different screw configurations and process parameters was tested. Particle size and shape are compared in scanning electron microscopy (SEM) images. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) are used to determine the residual amount of crystalline itraconazole in the final product. Results: An optimized screw configuration for the process was found which leads to more than 90% amorphous API when processed at room temperature. Full amorphization was reached at 70 °C. The specific mechanic energy (SME) introduced into the material during twin-screw processing is crucial for the dry amorphization. The higher the SME, the lower the residual amount of crystalline API. Two months after processing, however, recrystallization was observed by XRD. Conclusions: Dry processing using a twin-screw extruder is continuous, free of solvents and can be performed at low temperatures. This study proves the concept of twin-screw processing with mesoporous silica for dry amorphization of itraconazole.