In order to evaluate applicability of mixed-conducting PrBaFe2– xNi xО5 + δperovskites for cathodes of solid oxide fuel cells (SOFCs), their crystal structure, thermal and chemical expansion,...
14 August 2014 in Russian Journal of Electrochemistry
X-ray diffraction analysis of the pseudo-binary SrFe1−xVxO3−δ system showed that the solid solution formation limit at atmospheric oxygen pressure corresponds to x ≈ 0.1. SrFe0.9V0.1O3−δ has a cubic perovskite-type structure with the Pmm space group. The oxygen nonstoichiometry variations in SrFe0.9V0.1O3−δ, measured by coulometric titration in the oxygen partial pressure range of 10−21 to 0.5 atm at 1023–1223 K, can be adequately described using an ideal solution approximation with V5+ as the main oxidation state of vanadium cations. This approach was additionally validated by statistical thermodynamic modeling. The incorporation of vanadium decreases both oxygen deficiency and the average iron oxidation state with respect to undoped SrFeO3−δ. As a result, the electrical conductivity, thermal expansion and chemical expansivity associated with the oxygen vacancy formation all become lower compared to strontium ferrite. At 923 K, the conductivity of SrFe0.9V0.1O3−δ is 14% lower than that of SrFeO3−δ but 21% higher compared to SrFe0.9Ta0.1O3−δ. The area-specific polarization resistance of the porous SrFe0.9V0.1O3−δ electrode deposited onto 10 mol.% scandia- and 1 mol.% yttria-co-stabilized zirconia solid electrolyte with a protective Ce0.9Gd0.1O2−δ interlayer, was 0.34 Ohm×cm2 under open-circuit conditions at 1173 K in air.
25 June 2018 in Russian Journal of Electrochemistry
The oxygen nonstoichiometry and electrical conductivity of fluorite-type solid solutions Ce0.6‒ xLa0.4Pr xO2–δ ( x = 0.1–0.2) were studied in the oxygen partial pressure range 10–19–0.35 atm at...
1 February 2022 in Russian Journal of Electrochemistry
The electrical conductivity of fluorite-type Ce1 –x – yLaxPryO2 – δ (x = 0.29–0.40, y = 0–0.14) solid solutions was studied over the oxygen partial pressure range from 10–20 to 0.5 atm at 973–1223 K. The (Сe,La)O2 – δ was shown to possess predominant anion conductivity with the oxygen ion transference numbers above 0.99 over the entire temperature range. The decreasing of the oxygen partial pressure leads to an increase in n-type electronic conduction. The data on total conductivity as a function of the oxygen partial pressure varying from 10–8 atm down to 10–20 atm was used to model the electronic and ionic defect formation and transport processes under reductive conditions. The concentrations of point defects and their diffusivities were calculated. The concentration of electrons localized at cerium cations, their mobility and, consequently, the partial n-type electronic conductivity were all found to decrease with the increasing of the dopants concentration. The oxygen-ion conductivity and the oxygen vacancy mobility both decreased with the increasing of the La3+, Pr3+, and Ce3+ cations’ total content. This behavior can be explained by the formation of point-defect clusters comprising Ln3+ and anion vacancies, which becomes more favorable with the addition of Ln3+.
1 February 2020 in Russian Journal of Electrochemistry
In order to evaluate applicability of Ce0.6 –хLa0.4PrхO2 – δ (x = 0–0.2) fluorites for protective interlayers and electrode components for intermediate-temperature solid oxide fuel cells (SOFCs), their thermal expansion, chemical interaction with solid electrolyte material, tolerance towards reduction and electrochemical behavior were studied. The incorporation of praseodymium into Ce0.6La0.4O2 – δ was found to increase unit cell parameters and thermal expansion coefficients, from (13.2 ± 0.3) × 10–6 to (18.5 ± 0.8) × 10–6 К–1 at intermediate temperatures. Increasing total concentration of rare-earth cations in the fluorite-like cerium dioxide structure also correlates with decreasing thermodynamic stability under both oxidizing and reducing conditions. As a result, high-temperature chemical interaction between the Pr-doped materials and lanthanum gallate-based solid electrolyte becomes more intensive with respect to Ce0.6La0.4O2 – δ, whilst reduction of Pr-containing solid solution may leads to segregation of a secondary phase with the C-type structure. The combination of these factors deteriorates compatibility of the interlayers with other SOFC components. Consequently, the overpotentials of PrBaFe1.2Ni0.8O6 – δ cathodes in the electrochemical cells with (La0.9Sr0.1)0.98Ga0.8Mg0.2O3 – δ solid electrolyte were –42 and –143 mV in O2 atmosphere at the current density –58 mA/cm2 and 1073 K when the interlayers of Ce0.6La0.4O2 – δ or Ce0.5La0.4Pr0.1O2 – δ were used, respectively.