This paper reviews and analyzes three types of vertical-axis wind rotors: the classic Savonius, spiral Savonius, and Darrieus designs. Using numerical modeling methods, including computational fluid dynamics (CFD), their aerodynamic characteristics, power output, and efficiency under different operating conditions are examined. Key parameters such as lift, drag, torque, and power coefficient are compared to identify the strengths and weaknesses of each rotor. Results highlight that the Darrieus rotor demonstrates the highest efficiency at higher wind speeds due to lift-based operation, while the spiral Savonius offers improved stability, smoother torque characteristics, and adaptability in turbulent or low-wind environments. The classic Savonius, though less efficient, remains simple, cost-effective, and suitable for small-scale urban applications where reliability is prioritized over high performance. In addition, the study outlines the importance of blade geometry, tip speed ratio, and advanced materials in enhancing rotor durability and efficiency. The integration of modern optimization approaches, such as CFD-based design improvements and machine learning techniques, is emphasized as a promising pathway for developing more reliable and sustainable vertical-axis wind turbines. Although the primary analysis relies on numerical simulations, the observed performance trends are consistent with findings reported in experimental studies, indicating that the results are practically meaningful for design screening, technology selection, and siting decisions. Unlike prior studies that analyze Savonius and Darrieus rotors in isolation or under heterogeneous setups, this work (i) establishes a harmonized, fully specified CFD configuration (common domain, BCs, turbulence/near-wall treatment, time-stepping) enabling like-for-like comparison; (ii) couples the transient aerodynamic loads p(θ,t) into a dynamic FEA + fatigue pipeline (rainflow + Miner with mean-stress correction), going beyond static loading proxies; (iii) quantifies a prototype-stage materials choice rationale (aluminum) with a validated migration path to orthotropic composites; and (iv) reports reproducible wake/torque metrics that are cross-checked against mature models (DMST/actuator-cylinder), providing design-ready envelopes for small/medium VAWTs. Overall, the work provides recommendations for selecting rotor types under different wind conditions and operational scenarios to maximize energy conversion performance and long-term reliability.

The increasing frequency of wind turbine failures due to extreme weather conditions necessitates the implementation of new solutions to enhance their operational reliability. This paper presents an automatic rotor drop system specifically designed for wind turbines equipped with the Onipko rotor. The system aims to protect turbines from damage caused by critical wind speeds, reducing maintenance costs and extending the equipment’s lifespan. The unique design of the Onipko rotor allows it to operate at wind speeds as low as 0.1 m/s. However, its high drag coefficient and lack of aerodynamic optimization make it susceptible to mechanical stress and structural instability under strong gusts, requiring additional protective measures. The paper presents a calculation of the critical wind speed at which protective measures must be initiated. Through mathematical modeling, this study demonstrates the effectiveness of the rotor drop system in ensuring safe operation at wind speeds reaching 23.5 m/s. The optimization of the PI controller parameters provides a rapid response and stability, significantly enhancing the resilience of wind turbines to adverse weather conditions.

This article presents the possibility of increasing the efficiency of a vertical-axis wind generator through the introduction of an automatic control system for the angle of attack of the blades. The calculation of the optimal position of the wind turbine blades for the maximum generation of electrical energy is given, and a developed scheme for controlling the blades using the sensors of the angular speed of rotation of the wind wheel by the anemometer and the current position of the blades is presented. The automatic control system implies the use of a PD controller. A comparison is made of two laboratory experimental models of vertical-axis wind turbines with and without the developed control system. This article focuses on optimizing the angle of attack and developing an automatic control system for vertical-axis wind turbines to increase their efficiency in generating electrical energy.

This article discusses the construction of a dynamic model for controlling the position of the blades of a vertical-axis wind generator using an automatic approach; a method is presented that relates the rotation of the motor to the position of the blades, which allows the optimization of the operation of the control system. In the research process, an automatic approach is used, which makes it possible to carry out numerical calculations that predict the behavior of the system at various values of motor rotation. The model allows us to analyze the dependence of the position of the blades on the rotation of the motor and determine the optimal parameters of the mathematical control model. The main goal of our study is to develop a mathematical model of the mechanism for further adjustment of the wind turbine blade position control system depending on the wind speed.

This article explores and optimizes network technologies for wind energy systems, focusing on the RS-485 interface to ensure reliable data transmission in extreme conditions. The study aims to address the impact of various distortions on data quality and wind turbine management. A system was proposed with two wind turbines, each equipped with a Raspberry Pi 4, connected to sensors measuring temperature, vibration, and wind speed. The research examined how data transmission rates affect signal shape, calculating the distortion coefficient. At 460,800 baud, the signal was almost completely distorted, with significant amplitude loss. The distortion coefficients were 1.84 for logic ‘1’ and 1.92 for logic ‘0’. The optimal speed to minimize distortions was found to be 19,200 baud, providing the most stable signal. Additionally, temperature significantly impacted transmission quality, highlighting the need to consider climatic conditions in system design. The findings and methods can help improve existing data transmission systems and enhance wind turbine performance.

This article discusses the automated control of dynamic loads in drive systems using the example of a wind turbine screw drive. A mathematical model was developed, including differential equations of system motion, the voltage balance of the electric motor, and transfer functions of the control system. The Laplace transform was applied to obtain the system’s frequency and time characteristics. Numerical calculations and simulation results are presented, demonstrating the system’s stability and the effectiveness of the proposed control method. The generated amplitude–frequency and transient response graphs confirm the system’s operability. The proposed approach enhances the reliability of the screw drive, reduces mechanical loads, and extends the equipment’s service life.