Kuanysh Alipbayev

Prof. Kuanysh Alipbayev

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 October 2025 in Inventions
Verified
Journal Article
Open access
PDF file
AFAlina Fazylova
Alina Fazylova
Kuanysh AlipbayevKuanysh Alipbayev
Kuanysh Alipbayev
Alisher AdenAlisher Aden
Alisher Aden
FOFariza Oraz
Fariza Oraz
Teodor IlievTeodor Iliev
Teodor Iliev
Ivaylo StoyanovIvaylo Stoyanov
Ivaylo Stoyanov
This paper reviews and analyzes three types of vertical-axis wind rotors: the classic Savonius, spiral Savonius, and Darrieus designs. Using numerical modeling methods, including computational fluid dynamics (CFD), their aerodynamic characteristics, power output, and efficiency under different operating conditions are examined. Key parameters such as lift, drag, torque, and power coefficient are compared to identify the strengths and weaknesses of each rotor. Results highlight that the Darrieus rotor demonstrates the highest efficiency at higher wind speeds due to lift-based operation, while the spiral Savonius offers improved stability, smoother torque characteristics, and adaptability in turbulent or low-wind environments. The classic Savonius, though less efficient, remains simple, cost-effective, and suitable for small-scale urban applications where reliability is prioritized over high performance. In addition, the study outlines the importance of blade geometry, tip speed ratio, and advanced materials in enhancing rotor durability and efficiency. The integration of modern optimization approaches, such as CFD-based design improvements and machine learning techniques, is emphasized as a promising pathway for developing more reliable and sustainable vertical-axis wind turbines. Although the primary analysis relies on numerical simulations, the observed performance trends are consistent with findings reported in experimental studies, indicating that the results are practically meaningful for design screening, technology selection, and siting decisions. Unlike prior studies that analyze Savonius and Darrieus rotors in isolation or under heterogeneous setups, this work (i) establishes a harmonized, fully specified CFD configuration (common domain, BCs, turbulence/near-wall treatment, time-stepping) enabling like-for-like comparison; (ii) couples the transient aerodynamic loads p(θ,t) into a dynamic FEA + fatigue pipeline (rainflow + Miner with mean-stress correction), going beyond static loading proxies; (iii) quantifies a prototype-stage materials choice rationale (aluminum) with a validated migration path to orthotropic composites; and (iv) reports reproducible wake/torque metrics that are cross-checked against mature models (DMST/actuator-cylinder), providing design-ready envelopes for small/medium VAWTs. Overall, the work provides recommendations for selecting rotor types under different wind conditions and operational scenarios to maximize energy conversion performance and long-term reliability.

14 July 2023 in Sensors
Verified
Journal Article
Open access
PDF file
Yerkebulan NurgizatYerkebulan Nurgizat
Yerkebulan Nurgizat
AAAbu-Alim Ayazbay
Abu-Alim Ayazbay
DGDimitri Galayko
Dimitri Galayko
Gani SergazinGani Sergazin
Gani Sergazin
Kuanysh AlipbayevKuanysh Alipbayev
Kuanysh Alipbayev
CubeSats require accurate determination of their orientation relative to the Sun, Earth, and other celestial bodies to operate successfully and collect scientific data. This paper presents an orientation system based on solar and magnetic sensors that offers a cost-effective and reliable solution for CubeSat navigation. Solar sensors analyze the illumination on each face to measure the satellite’s orientation relative to the Sun, while magnetic sensors determine the Earth’s magnetic field vector in the satellite’s reference frame. By combining the measured data with the known ephemeris of the satellite, the satellite–Sun vector and the magnetic field orientation can be reconstructed. The orientation is expressed using quaternions, representing the rotation from the internal reference system of the satellite to the selected reference system. The proposed system demonstrates the ability to accurately determine the orientation of a CubeSat using only two sensors, making it suitable for installations where more complex and expensive instruments are impractical. Additionally, the paper presents a mathematical model of a low-cost CubeSat orientation system and a hardware implementation of the sensor. The technology, using solar and magnetic sensors, provides a reliable and affordable solution for CubeSat navigation, supporting the increasing sophistication of miniature payloads and enabling accurate satellite positioning in space missions.

21 August 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
AKAngsagan Kenzhegarayeva
Angsagan Kenzhegarayeva
Kuanysh AlipbayevKuanysh Alipbayev
Kuanysh Alipbayev
AZAlgazy Zhauyt
Algazy Zhauyt
In the last decades, small satellites such as CubeSats and PocketQubes have become popular platforms for scientific and applied missions in low Earth orbit (LEO). However, prolonged exposure to atomic oxygen, ultraviolet radiation, and thermal cycling in LEO leads to gradual degradation of onboard solar panels, reducing mission lifetime and performance. This study addresses the need to quantify and compare the degradation behavior of different solar cell technologies and protective coatings used in nanosatellites and pico-satellites. The aim is to evaluate the in-orbit performance of monocrystalline silicon (Si), gallium arsenide (GaAs), triple-junction (TJ) structures, and copper indium gallium selenide (CIGS) cells under varying orbital and satellite parameters. Telemetry data from recent small satellite missions launched after 2020, combined with numerical modeling in GNU Octave, were used to assess degradation trends. The models were validated using empirical mission data, and statistical goodness-of-fit metrics (RMSE, R2) were applied to evaluate linear and exponential degradation patterns. Results show that TJ cells exhibit the highest resistance to LEO-induced degradation, while Si-based panels experience more pronounced power loss, especially in orbits below 500 km. Furthermore, smaller satellites (<10 kg) display higher degradation rates due to lower thermal inertia and limited shielding. These findings provide practical guidance for the selection of solar cell technologies, anti-degradation coatings, and protective strategies for long-duration CubeSat missions in diverse LEO environments.

6 February 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
AZAlgazy Zhauyt
Algazy Zhauyt
Kuanysh AlipbayevKuanysh Alipbayev
Kuanysh Alipbayev
Alisher AdenAlisher Aden
Alisher Aden
AOAray Orazaliyeva
Aray Orazaliyeva
GBGulmira Bikhozhayeva
Gulmira Bikhozhayeva
This research focuses on the dynamic analysis of an oscillating conveyor mechanism using numerical methods to solve nonlinear differential equations that govern its motion. The system under study is modeled by a second-order differential equation of the form R(t)dω1dt+Q(t)ω12(t)=W(t), where R(t), Q(t), and W(t) are time-dependent functions representing system parameters such as resistance, damping, and external driving forces. To solve these equations, we employed a numerical approach based on Euler’s method, which discretizes the time domain into small steps h and approximates the derivatives of angular velocity and angular displacement. The angular velocity ωk+1 and angular displacement φk+1 are updated iteratively using the formulas ωk+1=ωk+h(WkRk−QkRkωk2) and φk+1=φk+hωk, respectively. Initial conditions, with ω0=0 and φ0=0, were specified, and the system was simulated over a specified time range divided into N time steps. In the simulation, key parameters such as A(t), B(t), D(t), E(t), F(t), H(t), N(t), M(t), Q(t), R(t), and W(t) were evaluated at each time step based on the system’s geometry and the angular displacements. Due to the complexity of the system, analytical solutions were impractical, so the Runge–Kutta method was employed for higher accuracy in the integration process. The results from the numerical simulations were validated by comparing them with theoretical expectations, and the system’s dynamic behavior was visualized using time-series and 3D plots. The simulation demonstrated that the system’s stability and accuracy were highly dependent on the time step h, with smaller values providing more precise results at the cost of increased computational time. The research confirms the applicability of numerical methods in solving complex nonlinear differential equations for dynamic systems and provides insights into the system’s behavior under various operating conditions.

4 September 2025 in Engineering Proceedings
Verified
Conference Paper
Open access
PDF file
AFAlina Fazylova
Alina Fazylova
Kuanysh AlipbayevKuanysh Alipbayev
Kuanysh Alipbayev
Teodor IlievTeodor Iliev
Teodor Iliev
Alisher AdenAlisher Aden
Alisher Aden
This article discusses the automated control of dynamic loads in drive systems using the example of a wind turbine screw drive. A mathematical model was developed, including differential equations of system motion, the voltage balance of the electric motor, and transfer functions of the control system. The Laplace transform was applied to obtain the system’s frequency and time characteristics. Numerical calculations and simulation results are presented, demonstrating the system’s stability and the effectiveness of the proposed control method. The generated amplitude–frequency and transient response graphs confirm the system’s operability. The proposed approach enhances the reliability of the screw drive, reduces mechanical loads, and extends the equipment’s service life.

28 May 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
AFAlina Fazylova
Alina Fazylova
Kuanysh AlipbayevKuanysh Alipbayev
Kuanysh Alipbayev
Teodor IlievTeodor Iliev
Teodor Iliev
NKNazgul Kaliyeva
Nazgul Kaliyeva
This study presents the development of an adaptive control system for aerodynamic flaps of a two-tier vertical-axis Savonius wind rotor to improve performance under variable wind loads. The approach includes detailed kinematic and dynamic modeling of the flap actuation mechanism, accounting for real-world nonlinearities such as backlash, friction, and impact loads. The mechanical transmission system is analyzed to evaluate the influence of design parameters on system dynamics and control accuracy. A mathematical model of an adaptive PID controller is proposed, capable of real-time adjustment of gain parameters based on external wind torque. Numerical simulations under various wind conditions demonstrate that adaptive tuning significantly enhances system stability, reduces overshoot, and ensures faster response compared to fixed-parameter controllers. Sensitivity analysis confirms the importance of mass distribution, mechanical stiffness, and damping in minimizing vibrations and ensuring durability. The developed system provides a reliable solution for efficient wind energy conversion in dynamic environments, including urban and coastal applications.