Aluminium plate-fin heat exchangers are widely used in automotive, aerospace, and other industrial applications. Extensive research has been conducted on these coolers, yet accurate predictive tools for their thermo-hydraulic performance are still lacking, due to the wide variety of geometric parameters and working fluids involved. This work proposes an original approach based purely on physical principles and established models, combining detailed numerical models for the extended surfaces and manifolds, with global models aimed at accurately evaluating overall head losses and heat transfer rates in plate-fin heat exchangers. Extended surfaces are studied by means of computational models of unitary fin modules under fully developed flow conditions. Entrance effects are analysed through dedicated numerical models. Numerical results on extended surfaces are extended to whole heat exchangers by global models for heat transfer and head losses, based on the method and the Darcy–Weisbach equation, respectively. The proposed approach is presented and validated through the analysis of a case study comprising several heat exchangers featuring different geometries and working fluids. Numerically derived heat transfer rates and head losses are compared with experimental data showing maximum deviations of ±20% for most of the tested configurations, highlighting the strength of the proposed modelling methodology.
The search for alternative, more environmentally friendly coolants to replace mineral oils in power transformers represents a relevant challenge for the power industry. In this frame, a CFD analysis is carried out by means of an open-source, conjugate heat transfer Finite Volume solver to assess the heat transfer performance of different coolants in a disc-type winding of an oil-immersed power transformer, whose geometry is taken from a reference case in the literature. Four different oils are considered: two mineral oils widely established among power transformer manufacturers, a synthetic ester and a natural ester. The latter two represent environmentally friendly alternatives to mineral oils, of great interest for the specific sector. The influence of temperature-dependent thermophysical properties on the overall flow and on the location and value of the hot spots in the copper conductors is discussed, highlighting the strength and weaknesses of the four oils as transformer coolants. In particular, the natural ester exhibits the best heat transfer performance, whereas high hot-spot temperatures and strong fluctuations are found for both mineral oils and the synthetic ester.