Air-bubble entrainment produced by the impact of water drops on a liquid pool is investigated with the use of high-speed imaging. A wide range of drop volumes and impact velocities is considered to determine how the entrainment mechanisms change with varying the impact conditions. Five different entrainment regimes are distinguished on the basis of the observed flow phenomena. Their characteristic features are described in terms of bubble formation, crater evolution, jetting and secondary drop ejection. A regime map is reconstructed in the Froude-Weber space. Results obtained in the present study show good agreement with the phase diagrams reported in the literature and contribute to complete the scenario of the entrainment regimes. Quantitative data about the size and the residence times of the entrained nuclei are also presented.
The search for alternative, more environmentally friendly coolants to replace mineral oils in power transformers represents a relevant challenge for the power industry. In this frame, a CFD analysis is carried out by means of an open-source, conjugate heat transfer Finite Volume solver to assess the heat transfer performance of different coolants in a disc-type winding of an oil-immersed power transformer, whose geometry is taken from a reference case in the literature. Four different oils are considered: two mineral oils widely established among power transformer manufacturers, a synthetic ester and a natural ester. The latter two represent environmentally friendly alternatives to mineral oils, of great interest for the specific sector. The influence of temperature-dependent thermophysical properties on the overall flow and on the location and value of the hot spots in the copper conductors is discussed, highlighting the strength and weaknesses of the four oils as transformer coolants. In particular, the natural ester exhibits the best heat transfer performance, whereas high hot-spot temperatures and strong fluctuations are found for both mineral oils and the synthetic ester.
1 January 2017 in Journal of Physics: Conference Series
Foam formation in a carbonated solution undergoing pouring and decompression is investigated with the use of high-speed imaging. Operational conditions similar to those encountered in industrial bottling processes are applied to inspect the mechanisms that control the foaming behaviour in practical filling applications. The evolution of the foam column during pressure release is analysed in quantitative terms by extracting the foam thickness from the images. The bubble dynamics inside the solution, and the destabilization processes on the foam column are seen to have a paramount effect on the observed foam evolution trend. The contributions to foam formation given by the nuclei entrained in the bulk liquid and by the bubble-generating sites on the container walls are finally distinguished and discussed.