Photoanode materials with optimized particle sizes, excellent surface area and dye loading capability are preferred in good-performance dye sensitized solar cells. Herein, we report on an efficient dye-sensitized mesoporous photoanode of Ti doped zinc oxide (Ti-ZnO) through a facile hydrothermal method. The crystallinity, morphology, surface area, optical and electrochemical properties of the Ti-ZnO were investigated using X-ray photoelectron spectroscopy, transmission electron microscopy and X-ray diffraction. It was observed that Ti-ZnO nanoparticles with a high surface area of 131.85 m2 g−1 and a controlled band gap, exhibited considerably increased light harvesting efficiency, dye loading capability, and achieved comparable solar cell performance at a typical nanocrystalline ZnO photoanode.
16 November 2012 in Research on Chemical Intermediates
In this paper, the effect of microstructure on the thermal conductivity of plasma-sprayed Y2O3 stabilized ZrO2 (YSZ) thermal barrier coatings (TBCs) is investigated. Nine freestanding samples deposited on aluminum alloys are studied. Cross-section morphology such as pores, cracks, m-phase content, grain boundary density of the coated samples are examined by scanning electron microscopy (SEM) and electron back-scattered diffraction (EBSD). Multiple linear regressions are used to develop quantitative models that describe the relationship between the particle parameters, m-phase content and features of the microstructure such as porosity, crack-porosity, and the length density of small and big angle-cracks. Moreover, the relationship between the microstructure and thermal conductivity is investigated. Results reveal that the thermal conductivity of the coating is mainly determined by the microstructure and grain boundary density at room temperature (25 °C), and by the length density of big-angle-crack, monoclinic phase content and grain boundary density at high temperature (1200 °C).
1 June 2014 in Separation and Purification Technology
Using first principle calculations, the effect of Ce with different doping concentrations in the network of Zirconium dioxide (ZrO2) is studied. The ZrO2 cell volume linearly increases with the increasing Ce doping concentration. The intrinsic band gap of ZrO2 of 5.70 eV reduces to 4.67 eV with the 2.08% Ce doping. In 4.16% cerium doped ZrO2, the valence band maximum and conduction band minimum come closer to each other, about 1.1 eV, compared to ZrO2. The maximum band gap reduction of ZrO2 is observed at 6.25% Ce doping concentration, having the value of 4.38 eV. No considerable shift in the band structure is found with further increase in the doping level. The photo-response of the ZrO2 is modulated with Ce insertion, and two distinct modifications are observed in the absorption coefficient: an imaginary part of the dielectric function and conductivity. A 2.08% Ce-doped ZrO2 modeled system reduces the intensities of peaks in the optical spectra while keeping the peaks of intrinsic ZrO2. However, the intrinsic peaks related to ZrO2 completely vanish in 4.16%, 6.25%, 8.33%, and 12.5% Ce doped ZrO2, and a new absorption hump is created.
Due to the high formation energy of Indium interstitial defect in the TiO2 lattice, the most probable location for Indium dopant is substitutional sites. Replacing Ti by In atom in the anatase TiO2 shifted the absorption edge of TiO2 towards visible regime. Indium doping tuned the band structure of TiO2 via creating In 5p states. The In 5p states are successfully coupled with the O 2p states reducing the band gap. Increasing In doping level in TiO2 improved the visible light absorption. Compensating the charge imbalance by oxygen vacancy provided compensated Indium doped TiO2 model. The creation of oxygen vacancy widened the band gap, blue shifted the absorption edge of TiO2 and declined the UV light absorption. The 2.08% In in TiO2 is the optimal Indium doping concentration, providing suitable band structure for the photoelectrochemical applications and stable geometrical configuration among the simulated models. Our results provide a reasonable explanation for the improved photoactivity of Indium doped TiO2.