The Poza de la Sal diapir is a closed circular depression with Cretaceous Mesozoic materials, formed by gypsum, Keuper clays, and a large extension of salt in the center with intercalations of ophite. The low seismic activity of the area, the reduced permeability and porosity of the salt caverns, and the proximity to the Páramo de Poza wind park, make it a suitable place for the construction of a facility for underground storage of green hydrogen obtained from surplus wind power. The design of a cavern for hydrogen storage at a depth of 1000 m takes into account the differences in stresses, temperatures, and confining pressures involved in the salt deformation process. During the 8 months of the injection phase, 23.0 GWh can be stored in the form of hydrogen obtained from the wind energy surplus, to be used later in the extraction phase. The injection and extraction ratio must be developed under the conditions of geomechanical safety of the cavity, so as to minimize the risks to the environment and people, by conditioning the gas pressure inside the cavity to remain within a given range.

The production of agricultural waste is associated with environmental problems and risks to public health. The general interest demands, as an ecological alternative, the proper management of waste generated by industrial activity through its transformation into value-added products. Carbonization/activation (2 h/2 h) at 700 °C in a vertical furnace (20 K/min), to produce biochar and activated carbon (AC) from bamboo, orange, and paulownia residue, was carried out in a laboratory facility with physical activation by CO₂ and steam. The characterization of the carbonaceous material obtained was based on the determination of the N₂ adsorption–desorption isotherms at 77 K, the specific surface area with the BET procedure, and its internal structure by means of SEM images. The BET surface area values obtained as a function of the CO₂/steam agent used were 911/1182 m²/g, 248/388 m²/g, and 800/1166 m²/g for bamboo, orange, and paulownia, respectively. The range of variation of porosity in paulownia residue generated after steam activation was 485–1166 m²/g, varying depending on the degree of maturity of the biomass used. Research has shown that both the type of activation agent used to produce AC and the degree of plant maturation of the precursor residue affect the quality and characteristics of the final product.

The objective of this study is to evaluate the contamination of water resources in the Parac subbasin. The existing contamination by heavy metals due to the presence of mining companies is of great concern to the population that inhabits the area since health is being affected. A methodology has been used as an integrated approach based on pollution assessment indices. Five surface water samples and seven groundwater samples were collected in the Parac subbasin, in the vicinity of the Tamboraque tailings. Physicochemical parameters and heavy metals (Al, As, Br, Pb, Fe, Cd, Mn, Hg, B, Ni, Cu, and Se) were analyzed. The mean concentrations of Al, As, Ba, Cu, Fe, Pb, and Zn were 0.3 mg/L, 0.02 mg/L, 0.02 mg/L, 0.05 mg/L, 0.8 mg/L, 0.04 mg/L, and 0.12 mg/L respectively. HPI, HEI, and Cd indices were averaged around 1378.5, 134.5, and 126.5 respectively, HPI and Cd values were above 100 as a critical contamination index value, which indicates that the water samples are critically contaminated with respect to the heavy metals studied. The total variance was 88.11% of the water quality with two components according to the ACP analysis. Al, As, Cu, Fe, Pb, Zn, and Mn showed a high positive charge on PC1 (69.68%) while Ba and Mo had a high positive charge on PC2 (18.12%). The intensity of distribution of metals As, Fe, Mn, and Pb in surface and groundwater is an environmental concern and a more complete monitoring network is needed for the sustainable management of water resources.

The present study aims to describe the potential sources of energy in Peru with the purpose of implementing them to achieve a sustainable system, taking advantage of the natural resources in the Peruvian land. To achieve this, three alternative scenarios have been defined and analyzed using the LEAP (Long-range Energy Alternatives Planning) software [Software Version: 2020.1.112]. The scenarios are as follows: the first one, the Business-as-Usual scenario, is based on normal trends according to historical data and referencing projections made by Peruvian state entities; the second one is focused on Energy Efficiency, the highlighted characteristic is taking into consideration the efficient conditions in transmission and distribution of electric energy; and the third one, centered on Geothermal Energy, focused on the development of this type of energy source and prioritizing it. The primary purpose of this analysis is to identify the advantages and disadvantages inherent in each scenario in order to obtain the best out of each one. In this way, the intention is to propose solutions based on Peru’s national reality or possible uses of the country’s energy potential to supply its energy demand. Currently, Peru’s energy demand relies on fossil fuels, hydraulic, and thermal energy. However, there is the possibility of transforming this system into a sustainable one by strengthening existing and growing energy sources such as solar and wind energy and new technologies for hydraulic and thermal energy, in addition to considering geothermal energy as the main energy source in the third scenario. The new system mentioned satisfactorily indicates that the CO₂ equivalent emissions decrease significantly in the third scenario, with a 15.8% reduction compared to the first scenario and a 9.7% reduction in comparison to the second. On the other hand, the second scenario shows a 5.6% decrease in CO₂ emissions compared to the first, resulting from improvements in technology and energy efficiency without requiring significant modifications or considerable investments, as in the third scenario.

The new international outlook for the gas sector suggests evaluating exploitable reserves in previously unconsidered areas including hydraulic fracturing technology. In order to estimate the amount of gas in the Jaca Flysch formation, the analysis of geological and geophysical logs and the volumetric method have been used. It has been taking into account the part of the formation likely to contain gas, the porosity (2.65%) calculated from sonic logs with Wyllie’s equation, the water saturation (35.3%) with Archie’s formula, and the initial gas formation volume factor (Bgi), estimated with MHA-P3 software with the reservoir pressure/temperature data 3600 psi/90 °C. The economic analysis of each well has been carried out based on three options, without stimulation, with 50% and 100% stimulation by fracking, and five possible construction costs (7.5–15 MM€). The impact of the use of the fracking technology on the production of the well is about 48%. The production rate and the economic impact that its exploitation would have on the domestic demand for natural gas has been analyzed, resulting in a significant contribution to the national energy mix of between 10–20% of consumption for several years.

The purpose of the evaluation of the Peruvian energy generation system is to project the electricity generation and demand until the year 2050. To achieve this, three alternative scenarios have been defined and analyzed using the LEAP (Long-range Energy Alternatives Planning) software. The scenarios are as follows: the first one, Business-as-Usual scenario, based on normal trends according to historical data and referencing projections made by Peruvian state entities; the second one is focused on Energy Efficiency, the highlighted characteristic is taking into consideration the efficient conditions in transmission and distribution of electric energy; and the third one, centered on Geothermal Energy, focused on the development of this type of energy source and prioritizing it. The primary purpose of this analysis is to identity advantages and disadvantages inherent in each scenario in order to get the best of each one. In this way, the intention is to propose solutions based on Peru’s national reality or possible uses of the country’s energy potential to supply its energy demand. Currently, Peru’s energy demand relies on fossil fuels, hydraulic, and thermal energy. However, there is the possibility of transforming this system into a sustainable one, by strengthening existing and growing energy sources such as solar and wind energy, and new technologies for hydraulic and thermal energy, in addition to considering geothermal energy as the main energy source in the third scenario. The new system mentioned satisfactorily indicate that the CO2 equivalent emissions decrease significantly in the third scenario, with a 15.8% reduction compared to the first scenario and a 9.7% reduction in comparison to the second. On the other hand, the second scenario shows a 5.6% decrease in CO2 emissions compared to the first, resulting from improvements in technology and energy efficiency without requiring significant modifications or considerable investments, as in the third scenario.