The transport sector heavily relies on the use of fossil fuels, which are causing major environmental concerns. Solutions relying on the direct or indirect use of electricity through e-fuel production are emerging to power the transport sector. To ensure environmental benefits are achieved over this transition, an accurate estimation of the impact of the use of electricity is needed. This requires a high temporal resolution to capture the high variability of electricity. This paper presents a previously unseen temporal analysis of the carbon intensity of e-fuels using grid electricity in countries that are members of the European Network of Transmission System Operators (ENTSO-E). It also provides an estimation of the potential load factor for producing low-carbon e-fuels according to the European Union legislative framework. This was achieved by building on top of the existing EcoDynElec tool to develop EcoDynElec_xr, a python tool enabling—with an hourly time resolution—the calculation, visualisation, and analysis of the historical time-series of electricity mixing from the ENTSO-E. The results highlight that, in 2023, very few European countries were reaching low carbon intensity for electricity that enables the use of grid electricity for the production of green electrolytic hydrogen. The methodological assumptions consider the consumption of the electricity mix instead of the production mix, and the considered time step is of paramount importance and drastically impacts the potential load factor of green hydrogen production. The developed tools are released under an open-source license to ensure transparency, result reproducibility, and reuse regarding newer data for other territories or for other purposes.
The transport sector is heavily relying on the use of fossil fuels that are causing major environmental concerns. Solutions relying on the direct or indirect use of electricity, through e-fuels production, are emerging to power the transport sector. To ensure environmental benefits over this transition, an accurate estimation of the impact of the use of electricity is needed. This work presents a temporal analysis of carbon intensity of e-fuels using grid electricity in countries members of the European Network of Transmission System Operators (ENTSO-E). It also provides an estimation of the potential load factor for to produce low-carbon e-fuels according to the European Union legislative framework. This was achieved, building on top of the existing EcoDynElec tool, by developing EcoDynElec_xr a python tool enabling, with an hourly time resolution, the calculation, visualisation and the analysis of the historical time-series of electricity mix from the ENTSO-E. The results highlight that, in 2023, a minority of European countries were reaching low carbon intensity of electricity that enables the use of grid electricity for green electrolytic hydrogen production. The methodological hypothesis to consider the consumed electricity mix instead of the production mix, and the considered time step, are of paramount importance and drastically impact the potential load factor of green hydrogen production. The developed tool and calculated data are released under an open-source license to ensure transparency, results reproducibility, reuse on newer data, or for other purposes.
Ces travaux de thèse portent sur l’évaluation des impacts environnementaux de l’énergie. Le modèle énergétique actuel, qui supporte l’ensemble des activités économiques mondiales, cause d’importants impacts environnementaux en contribuant au changement climatique et à l’épuisement de ressources, mais aussi en dégradant la biodiversité et la santé humaine. Les impacts environnementaux de l’énergie sont évalués, non pas en considérant la seule phase de production d’énergie, mais l’intégralité de leur cycle de vie : de l’extraction des matières premières jusqu’à la fin de vie. La production d’énergie renouvelable étant météo-dépendante, des systèmes de stockage d’énergie peuvent devenir nécessaires pour assurer l’adéquation temporelle entre la production et la consommation lorsque les taux de pénétration d’énergies renouvelables deviennent importants. Dans un premier temps, des modèles paramétrés d’inventaires de cycle de vie ont été développés pour chaque filière de production et de stockage d’énergie. Ils permettent de tenir compte de la variabilité technologique, spatiale et temporelle de la performance environnementale de ces systèmes qui peut être importante. Dans un second temps, une approche reposant sur le développement et le couplage de modèles paramétrés de séries temporelles de production et de consommation a été mise au point. Elle permet d’estimer les besoins de stockage induits par la météo-dépendance de la production mais aussi de la consommation. La méthode globale dynamique et paramétrique d’évaluation d’impacts environnementaux par Analyse de Cycle de Vie (ACV) alors développée a été appliquée à des scénarios d’autoconsommation puis au territoire insulaire de La Réunion. Ces travaux démontrent que, même en tenant compte des besoins de stockage induits par la variabilité de la production, les énergies renouvelables présentent, sur leur cycle de vie, une empreinte environnementale qui reste nettement inférieure aux alternatives fossiles qu’elles cherchent à substituer.