This paper presents one of the soft computing methods, specifically the artificial neural network technique, that has been used to model the temperature dependence of dynamic mechanical properties and visco-elastic behavior of widely exploited thermoplastic polyurethane over the wide range of temperatures. It is very complex and commonly a highly non-linear problem with no easy analytical methods to predict them directly and accurately in practice. Variations of the storage modulus, loss modulus, and the damping factor with temperature were obtained from the dynamic mechanical analysis tests across transition temperatures at constant single frequency of dynamic mechanical loading. Based on dynamic mechanical analysis experiments, temperature dependent values of both dynamic moduli and damping factor were calculated by three models of well-trained multi-layer feed-forward back-propagation artificial neural network. The excellent agreement between the modeled and experimental data has been found over the entire investigated temperature interval, including all of the observed relaxation transitions. The multi-layer feed-forward back-propagation artificial neural network has been confirmed to be a very effective artificial intelligence tool for the modeling of dynamic mechanical properties and for the prediction of visco-elastic behavior of tested thermoplastic polyurethane in the whole temperature range of its service life.

This paper from the field of environmental chemistry offers an innovative use of sorbents in the treatment of waste industrial water. Various industrial activities, especially the use of technological fluids in machining, surface treatment of materials, ore extraction, pesticide use in agriculture, etc., create wastewater containing dangerous metals that cause serious health problems. This paper presents the results of studies of the natural zeolite clinoptilolite as a sorbent of copper cations. These results provide the measurement of the sorption kinetics as well as the observed parameters of sorption of copper cations from the aquatic environment to the clinoptilolite from a promising Slovak site. The effectiveness of the natural sorbent is also compared with that of certain known synthetic sorbents.

The paper deals with the innovative ways of nonstandard, simplifying applications of the valid method for evaluating uncertainties in measurement results and with the definition of conditions of their usability. The evaluation of a substitute criterion for measurement accuracy by means of a relative difference between the measurand and its reference value is proposed. This nonstandard relative uncertainty is comparable with the overall relative standard uncertainty in the measurement result, and thus the evaluation of it enables other simplifications in the calculations of measurement result uncertainties. The use of the simplified evaluation of measurement results is illustrated in two experiments in measurement of the coefficient of thermal conductivity of an insulating material newly developed for the needs of building practice, namely measurement using commercial instruments, and measurement using a newly developed original measuring instrument.Web of Science1316

The paper solves the problem of the nonexistence of a new method for calculation of dynamics of stress-deformation states of deformation tool-material systems including the construction of stress-strain diagrams. The presented solution focuses on explaining the mechanical behavior of materials after cutting by abrasive waterjet technology (AWJ), especially from the point of view of generated surface topography. AWJ is a flexible tool accurately responding to the mechanical resistance of the material according to the accurately determined shape and roughness of machined surfaces. From the surface topography, it is possible to resolve the transition from ideally elastic to quasi-elastic and plastic stress-strain states. For detecting the surface structure, an optical profilometer was used. Based on the analysis of experimental measurements and the results of analytical studies, a mathematical-physical model was created and an exact method of acquiring the equivalents of mechanical parameters from the topography of surfaces generated by abrasive waterjet cutting and external stress in general was determined. The results of the new approach to the construction of stress-strain diagrams are presented. The calculated values agreed very well with those obtained by a certified laboratory VÚHŽ.

This work evaluates the possibility of identifying mechanical parameters, especially upper and lower yield points, by the analytical processing of specific elements of the topography of surfaces generated with abrasive waterjet technology. We developed a new system of equations, which are connected with each other in such a way that the result of a calculation is a comprehensive mathematical–physical model, which describes numerically as well as graphically the deformation process of material cutting using an abrasive waterjet. The results of our model have been successfully checked against those obtained by means of a tensile test. The main prospect for future applications of the method presented in this article concerns the identification of mechanical parameters associated with the prediction of material behavior. The findings of this study can contribute to a more detailed understanding of the relationships: material properties—tool properties—deformation properties.