Kosterman Usri

Kosterman Usri

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 May 2016 in Key Engineering Materials
Verified
Journal Article
Closed access
PDF file
ZHZulia Hasratiningsih
Zulia Hasratiningsih
Arief CahyantoArief Cahyanto
Arief Cahyanto
VTVeni Takarini
Veni Takarini
EKElin Karlina
Elin Karlina
NDNina Djustiana
Nina Djustiana
BPBambang Sunendar Purwasasmita
Bambang Sunendar Purwasasmita
In this study, novel composites materials composed of polymethyl methacrylate (PMMA) reinforced ZrO2-Al2O3-SiO2 filler system were developed. Zirconia-alumina-silica filler system were synthesized through sol-gel technique. Chitosan and trimethoxypropilsilane (TMPS) were used to modify the composites system. The resulting composites material were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD) and hardness test. SEM images displayed the composites particles in nanometer size with minor agglomeration. The XRD results revealed the presence of cubic and tetragonal phase of zirconia and also monoclinic silica phases in the composites system. These crystallographic characteristic could affect the mechanical properties of the composites. The hardness value for un-modified composites was 15.27 ± 0.25 VHN and for TMPS 19.43 ± 1.89 VHN and chitosan modification 18.75 ± 2.05 VHN, respectively. Therefore, these novel composites materials composed of PMMA reinforced filler system of zirconia-alumina-silica would provide the potential to apply in dental technology.

27 November 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
KSKrisnadi Setiawan
Krisnadi Setiawan
RPRisti Saptarini Primarti
Risti Saptarini Primarti
SSSuhardjo Sitam
Suhardjo Sitam
WSWawan Suridwan
Wawan Suridwan
KUKosterman Usri
Kosterman Usri
FLFourier Dzar Eljabbar Latief
Fourier Dzar Eljabbar Latief
Micro-computed tomography (micro-CT) is an invaluable tool for the evaluation of dental implant success, whereby the assessment of bone microstructure is conducted. This review examines the role of micro-CT in evaluating bone microstructure in dental implants. A review of the current literature reveals that micro-CT enables the accurate measurement of bone volume, trabecular morphology, and connectivity density, all of which play a crucial role in implant stability. The high-resolution three-dimensional visualization capabilities of micro-CT are also beneficial for the analysis of osseointegration and the evaluation of bone augmentation biomaterials. Despite the existence of challenges such as imaging artifacts and limitations in in vivo applications, advancements in sub-micron resolution and artificial intelligence integration offer promise for improving diagnostic capabilities. Micro-CT provides valuable insights into bone microarchitecture and osseointegration dynamics, which have the potential to enhance pre-operative planning and clinical outcomes in dental implantology. Future research should prioritize the standardization of micro-CT analysis protocols and the exploration of direct clinical applications of this technology.

1 November 2017 in Key Engineering Materials
Verified
Journal Article
Closed access
PDF file
Arief CahyantoArief Cahyanto
Arief Cahyanto
EMElfira Megasari
Elfira Megasari
MZMyrna Nurlatifah Zakaria
Myrna Nurlatifah Zakaria
NDNina Djustiana
Nina Djustiana
SSSunarso Sunarso
Sunarso Sunarso
SWSebastian Sunardhi Widyaputra
Sebastian Sunardhi Widyaputra
Carbonate Apatite (CO3Ap) cement has been widely used for bone substitute. It is known that CO3Ap crystals have the close composition to natural bone. It is expected that CO3Ap cement may play an essential role in endodontics treatment, particularly as an endodontic sealer due to its potential to obturate root canal system to a more hermetic and stable environment. Therefore, the aim of this study is to fabricate CO3Ap cement as a new material for endodontic sealer. The CO3Ap cement sealer was prepared by mixing dicalcium phosphate anhydrous (DCPA), vaterite and calcium hydroxide [Ca(OH)2] with 0.2 mol/L Na2HPO4 containing 1% sodium carboxymethyl cellulose (NaCMC) and 32 µg thymoquinone, with liquid to powder ratio of 0.6. The set cement was incubated at 37°C under 100% relative humidity for 72 h. In this study, five compositions of powder ratio were prepared. The diametral tensile strength (DTS) evaluation indicated that CO3Ap cement made of 60% DCPA, 30% Vaterite and 10% Ca(OH)2 has the highest mechanical strength compared with the other compositions. X-ray diffraction (XRD) analysis of the set cement with the highest DTS value indicated that CO3Ap crystals were successfully formed. The set cement with the highest DTS value showed the highest density compared with the other compositions evidenced from scanning electron microscope (SEM) images. In conclusion, the CO3Ap cement was successfully fabricated by mixing DCPA, vaterite and Ca(OH)2. The CO3Ap cement prepared from 60% DCPA, 30% Vaterite and 10% Ca(OH)2 demonstrated the highest DTS value compared with the other compositions.

30 June 2022 in Padjadjaran Journal of Dental Researchers and Students
Verified
Journal Article
Open access
PDF file
FKFarah Kholidah
Farah Kholidah
KUKosterman Usri
Kosterman Usri
OHOpik Taofik Hidayat
Opik Taofik Hidayat
ABSTRAK Pendahuluan: Resin damar merupakan komoditas hasil hutan bukan kayu yang memiliki nilai ekonomi tinggi dan daya guna yang luas. Resin alami yang populer dan melimpah di Indonesia adalah resin damar mata kucing dan resin damar batu. Resin banyak digunakan dalam material kedokteran gigi seperti resin komposit, resin akrilik, varnish, dan dental wax, tetapi resin yang digunakan adalah resin buatan karena keterbatasan sumber daya resin alami di luar negeri. Penelitian ini bertujuan untuk menganalisis perbedaan nilai kekuatan tekan antara resin damar mata kucing dan resin damar batu dalam rangka penggunaan resin tersebut sebagai alternatif bahan dasar material kedokteran gigi Metode: Jenis penelitian eksperimental semu, uji kekuatan tekan pada 16 sampel resin damar mata kucing dan 16 sampel resin damar batu menggunakan alat Universal Testing Machine dengan kecepatan crosshead 1,0 ± 0,25 mm/menit hingga terjadi patahan pada sampel  berdasarkan metode ASTM D695. Nilai kekuatan tekan dari kedua resin damar tersebut kemudian dianalisis menggunakan metode uji Mann-Whitney menggunakan software SPSS statistik versi 22. Hasil: nilai kekuatan tekan resin damar mata kucing rerata 7,307±6,768 MPa, nilai kekuatan tekan resin damar batu rerata 3,139±1,067 MPa. Hasil p-value didapatkan nilai sebesar 0,032. Nilai P tersebut menunjukkan terdapat perbedaan nilai kekuatan tekan yang signifikan antara resin damar mata kucing dengan resin damar batu Simpulan: Resin damar mata kucing memiliki nilai kekuatan tekan lebih tinggi sehingga berpotensi lebih besar untuk aplikasi material kedokteran gigi yang memiliki sifat mekanis rendah seperti varnish. Kata kunci: Resin damar mata kucing (Shorea javanica); resin damar batu; uji kekuatan tekan.
ABSTRACT Introduction: Dammar resin is a non-timber forest product commodity that has high economic value and wide usability. Natural resins that are popular and abundant in Indonesia are mata kucing dammar resin and batu dammar resin. Resin widely used in dental materials such as composite resins, acrylic resins, varnishes, and dental waxes, but the resins used are artificial resins due to limited natural resin resources abroad. This study aims to analyze the difference in the compressive strength values between mata kucing dammar resin and batu dammar resin to use the resin as an alternative to dental materials. Methods: This research was quasi-experimental, compressive strength test on 16 samples of mata kucing dammar resin and 16 samples of batu dammar resin using a Universal Testing Machine with a crosshead speed of 1,0 ± 0,25 mm/minute until fracture occurs in the sample based on the ASTM D695 method. The value of the compressive strength of both dammar resins then analyzed using the Mann-Whitney test method using SPSS statistical software version 22. Results: The average compressive strength value of mata kucing dammar resin was 7,307±6,768 MPa, the average compressive strength value of batu dammar resin was 3,139±1,067 MPa. The p-value results obtained a value of 0.032. The p-value indicates a significant difference in the compressive strength value between the mata kucing dammar resin and the batu dammar resin. Conclusion: Mata kucing dammar resin has a higher compressive strength value, so it has greater potential for applying dental materials with low mechanical properties such as varnish. Keywords: Mata kucing dammar resin (Shorea javanica); batu dammar resin; compressive strength test.

1 January 2018 in AIP Conference Proceedings
Verified
Conference Paper
Closed access
PDF file
EKE. Karlina
E. Karlina
SSS. Susra
S. Susra
YFY. Fatmala
Y. Fatmala
HHH. M. Hartoyo
H. M. Hartoyo
VTV. Takarini
V. Takarini
IJI Made Joni
I Made Joni
Dental composite as restorative dental materials can be reinforced using ceramic fillers. Homogeneous distribution of filler particles shall improve its mechanical properties. This paper presents the results of the preliminary study on the ZrO2-Al2O3-SiO2 ceramic fillers made from Indonesian natural sand that can increase the mechanical properties of dental composite. The synthesis was done using zirconium silicate sand (ZrSiO4) and aluminium oxide (Al2O3) precursors, which dissolved together with 70:30 weight ratios. Two types of sand were used: (1) manufactured sand (mesh #80) and (2) natural sand (mesh #400). The samples then heated in the furnace at 1100 °C for 8 hours. The morphological characterization was then evaluated using JEOL Scanning Electron Microscope (SEM) for the surface structure that analyze particles size and distribution. Ceramic fillers made from natural sand is homogenous, well distributed with average particle size of 5-10 µm. Comparably, ceramic filler made from the manufactured sand is heterogeneous, poorly distributed and appear as agglomerates with average particle size are 30-50 µm. The results suggest that ceramic fillers made from natural sand demonstrate better character to represent as a functional restorative dental material.

1 January 2022 in Brazilian Oral Research
Verified
Journal Article
Open access
ASAnne Agustina Suwargiani
Anne Agustina Suwargiani
DADudi Aripin
Dudi Aripin
EAErry Mochamad Arief
Erry Mochamad Arief
EFEfi Fitriana
Efi Fitriana
NDNina Djustiana
Nina Djustiana
RARahimah Abdulkadir
Rahimah Abdulkadir
This study aimed to obtain the results of psychometric analysis and reliability of the dental treatment motivation scale (DTMS), which was adapted cross-culturally for pregnant women in Indonesia. A descriptive survey was conducted with 149 pregnant women at a maternal clinic in Bandung City, Indonesia, in December 2020. Convenience sampling was chosen as the sampling technique after the inclusion and exclusion criteria had been fulfilled. Two English experts initially translated the DTMS questionnaire from English into Indonesian and the translated questionnaire was then reviewed by four expert panels, which were modified afterwards. The validity test was carried out using the exploratory and confirmatory factor analyses and goodness of fit index (GFI). The internal reliability analysis used Cronbach's alpha, and the test-retest was conducted using Pearson's correlation coefficient. The psychometric analysis results were obtained from four testing stages. The first stage was the initial eigenvalue assessment, and the cumulative percentage value was >60%. The second stage was the exploratory factor analysis, with a loading factor of >0.3. The third stage consisted of the confirmatory factor analysis, forming two components of the factor structure (intrinsic and extrinsic motivations). Finally, the fourth stage was the GFI assessment, which showed the good fit model with a value of 0.903. Very high internal consistency reliability ranged from 0.985 to 0.990; the test-retest p-value of Pearson's correlation coefficient was 0.000. In conclusion, the Indonesian version of the DTMS proved to be a reliable and valid instrument to measure Indonesian pregnant women's motivation to seek oral health treatment.