A reliable finite element procedure to simulate shear-dominated ductile fractures in large-scale, thin-walled steel structures is still evolving primarily due to the challenges in determining the failure criterion of metal materials under complex stress states. This paper aims to examine the accuracy of the modified Gurson–Tvergaard–Needleman (GTN) model considering the shear failure in simulating the ductile fracture of steel plate structures under quasi-static punch loading. The modified GTN damage models are performed by the ABAQUS user-defined material subroutine (VUMAT). The void-related parameters and shear damage parameters of Xue’s and the N-H modified GTN models are calibrated from test specimens with various geometries corresponding to different stress triaxiality and shearing conditions. The damage evolution associated with shearing of voids in the modified GTN models has strong influences on the stress triaxiality versus plastic strain under complex stress states, especially for the shear-dominated loading conditions. Based on the original GTN model, Xue’s and the N-H modified GTN model with calibrated material parameters, a numerical comparative study examines the ductile fracture of steel non-stiffened plates and stiffened plates under punch loading. Benchmarked against the experimental studies, the numerical simulations demonstrate that the shear-driven void evolution in the modified GTN model imposes significant effects on the load–displacement responses as well as the onset and extension of ductile fractures in steel plates under punch actions. The N-H modified model with calibrated shear damage parameters shows a better correlation with the ductile fractures in steel plates observed in the experiment than the original GTN model and Xue’s modified GTN model. As a result of this study, the modified GTN model considering shear action can be applied for practical applications in the crashworthiness assessment of ship collision and grounding.
Ship grounding onto multiple rocks is one of the scenarios where a ship may suffer severe hull damage, thus leading to some serious consequences, such as casualties, oil spill pollution, and property damage. Ship bottom raking is the most common and severe damage type in grounding caused by sharp rocks moving against the bottom plate. This paper investigates the dynamic responses of ship grounding onto multiple sharp rocks, which has rarely been studied in the literature. Nine ship grounding in-tank model tests were conducted to provide experimental data for ship grounding onto a single rock or multiple rocks. A simplified scaled ship model with replaceable bottom plating was designed and used in the model test. Some artificial cone rock models with a 1 mm tip radius and a 15° semi-apex angle were assumed. The damage modes of the bottom plating and motions during ship grounding onto multiple rocks were obtained and recorded in the model tests, as well as the longitudinal grounding resistances. The effects of the initial relative height of each rock and the size of rock distribution on the structural damage mode and dynamic response of a ship model in multi-rock ship grounding were investigated. In addition, the results obtained from single-rock and multi-rock ship grounding model tests are compared.
A reliable finite element procedure to simulate shear-dominated ductile fracture in large-scale, thin-walled steel structures is still evolving due primarily to the challenges in determining the fracture criterion of steel materials under complex stress states. This paper aims to examine the accuracy of the modified Gurson-Tvergaard-Needleman (GTN) model considering the shear failure in simulating ductile fracture of steel plate structures under quasi-static punch loading. The modified GTN damage models are performed by ABAQUS user defined material subroutine (VUMAT). The void related parameters and shear damage parameters of Xue’s and N-H modified GTN models are calibrated from test specimens with various geometries corresponding to different stress triaxiality and shearing conditions. The damage evolution associated with the shearing of voids in the modified GTN models has strong influences on the stress triaxiality versus equivalent plastic strain under complex stress states, especially for the shear dominated loading conditions. Based on the original GTN model, Xue’s model, and N-H modified GTN model with calibrated material parameters, a numerical comparative study examines the ductile fracture of steel non-stiffened plate and stiffened plate under punch loading. Benchmarked against the experimental studies, the numerical simulations demonstrate that the shear driven void evolution in the modified GTN model imposes significant effects on the load-displacement responses, as well as the onset and extension of ductile fracture in steel plates under punch actions. The N-H modified model with calibrated shear damage parameters shows a better correlation with the ductile fractures in steel plates observed in the experiment, than the original GTN model and Xue’s modified GTN model. As a result of this study, the modified GTN model considering the shear failure can be applied for practical applications in the crashworthiness assessment of ship collision and grounding.