Gaylon Baumgardner

Dr. Gaylon Baumgardner


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 February 2024 in Buildings
Verified
Journal Article
Open access
PDF file
IBRAHIM ELNAMLIBRAHIM ELNAML
IBRAHIM ELNAML
LMLouay N Mohammad
Louay N Mohammad
GBGaylon Baumgardner
Gaylon Baumgardner
JLJun Liu
Jun Liu
SCSamuel Cooper
Samuel Cooper
SCSamuel Cooper
Samuel Cooper
Reclaimed asphalt pavement (RAP) has been utilized as a potential partial substitute for virgin asphalt binder in asphalt mixtures. However, a primary concern with increasing RAP content in asphalt mixtures is the cracking potential, attributed to the aged RAP asphalt binder (RAP-binder). To address this, the use of petroleum-based and bio-derived recycling agents (RAs) in enhancing the cracking resistance of high-RAP asphalt mixtures has been explored. The objective of this study is to ascertain the effectiveness of six RAs in mitigating cracking in high-RAP asphalt mixtures. The RAs considered include petroleum-crude-oil-derived aromatic oil, soy oil, and four types of tall-oil-derived phytosterol (industrial by-product, intermediate, purified, and fatty acid-based). The RAs’ dosages were optimized, based on RAP-binder and unmodified asphalt binder properties, to produce target PG 70-22 asphalt binder when incorporated in asphalt mixtures containing 30% RAP. To assess the engineering performance of these 30%-RAP asphalt mixtures for each RA, a conventional asphalt mixture incorporating styrene-butadiene-styrene (SBS)-modified PG 70-22 asphalt binder without RAP or RAs was benchmarked for comparison. Mechanical tests performed included Hamburg wheel-track testing (HWTT), intermediate-temperature fracture tests (semi-circular bend, Illinois flexibility index, and IDEAL cracking tolerance), and thermal stress-restrained specimen tensile strength test to evaluate permanent deformation, intermediate-temperature cracking resistance, and low-temperature cracking resistance, respectively. Results showed that petroleum-crude-oil-derived aromatic oil and tall-oil-derived fatty-acid-based oil RAs were able to rejuvenate RAP-binder as measured by the cracking tests performed. Further, the use of these RAs did not adversely impact the asphalt mixtures’ permanent deformation performance.

25 September 2024 in Recycling
Verified
Journal Article
Open access
PDF file
IBRAHIM ELNAMLIBRAHIM ELNAML
IBRAHIM ELNAML
LMLouay N Mohammad
Louay N Mohammad
GBGaylon Baumgardner
Gaylon Baumgardner
SCSamuel Cooper
Samuel Cooper
SCSamuel Cooper
Samuel Cooper
The substitution of virgin asphalt binder with reclaimed asphalt pavement (RAP) has environmental and economic merits, however, cracking susceptibility arises due to the aged asphalt binder within RAP. The objectives of this study are to (1) enhance the cracking resistance of asphalt mixtures containing 50% RAP utilizing recycling agents (RAs) derived from six petroleum-based and bio-based materials, (2) conduct an environmental impact assessment (represented by global warming potential “GWP”) for high-RAP mixtures including RAs, and (3) estimate the cost effectiveness of including high-RAP content in asphalt mixtures. Based on the RAP asphalt binder performance grade (PG), base asphalt binder PG, and RAP content, the RA contents were determined to achieve a target asphalt binder of PG 76-22. A control mixture was benchmarked for comparison, specified for high-traffic volume roads, and contained PG 76-22 polymer-modified asphalt binder. The engineering performance of studied asphalt mixtures was evaluated using the Hamburg wheel-tracking (HWT), semi-circular bend, Illinois flexibility index, Ideal cracking tolerance, and thermal stress-restrained specimen tensile strength tests. It was found that petroleum-derived aromatic oil, soy-based oil, and tall oil fatty acid-based RAs demonstrated a successful restoration of aged RAP asphalt binder without compromising the permanent deformation resistance. The 50% RAP mixtures emitted less GWP by 41% and 42.9% using petroleum- and bio-oil RAs, respectively, and achieved a 31% cost reduction compared to the control mixtures.

1 November 2023 in International Journal of Pavement Research and Technology
Verified
Journal Article
Closed access
PDF file
SRSumon Roy
Sumon Roy
Zahid HossainZahid Hossain
Zahid Hossain
GBGaylon Baumgardner
Gaylon Baumgardner
Musharraf ZamanMusharraf Zaman
Musharraf Zaman

1 November 2020 in International Journal of Pavement Research and Technology
Verified
Journal Article
Open access
PDF file
MMM. M. Tariq Morshed
M. M. Tariq Morshed
Zahid HossainZahid Hossain
Zahid Hossain
DCDao-Hao Chen
Dao-Hao Chen
GBGaylon Baumgardner
Gaylon Baumgardner
For characterizing polymer modified binders, different state Departments of Transportation (DOTs) use a variety of laborious and empirical Performance Grade (PG) “Plus” test methods such as elastic recovery (ER) and tenacity. However, the effects of elasto meric and/or plastomeric polymers are not been accurately identified through these conventional tests. The main research goal of this study is to recommend alternative test method(s), which can be pursued by using a, commonly available, dynamic shear rheometer (DSR). To this end, efficacies of test methods such as multiple stress creep recovery (MSCR), elastic recovery using a DSR (ER-DSR), linear amplitude sweep (LAS), and binder yield energy test (BYET) were explored in this study. Also, a viscoelastic continuum damage (VECD) model was developed to characterize the fatigue cracking of asphalt binders. Two types of polymer modi fied binders from ten sources approved by the Arkansas Department of Transportation (ARDOT) and Texas Department of Transportation (TXDOT) were evaluated in the laboratory. Test results and analyses suggest that without risking the suppliers or users, either the ER-DSR or MSCR test can be a good replacement of the ER test method. A new ER-DSR binder grading system has been proposed. Among the selected fatigue tests, the BYET results were found to be highly related to fatigue damage.

19 September 2026 in Polymers
Verified
Journal Article
Open access
PDF file
Anas AbuAliaAnas AbuAlia
Anas AbuAlia
IBRAHIM ELNAMLIBRAHIM ELNAML
IBRAHIM ELNAML
LMLouay N Mohammad
Louay N Mohammad
SCSamuel B. Cooper
Samuel B. Cooper
GBGaylon Baumgardner
Gaylon Baumgardner
Asphalt binders are complex viscoelastic polymeric materials whose rheological behavior is governed by interactions among their chemical constituents and, in polymer-modified systems, the morphology and stability of the dispersed polymer network. This study developed a performance-based framework for selecting the type and dosage of bio-based soybean recycling agents (RAs) for styrene-butadiene-styrene (SBS)-modified asphalt mixtures containing 30% reclaimed asphalt pavement (RAP). Ten dense-graded asphalt mixtures with a nominal maximum aggregate size of 12.5 mm were evaluated, including a control mixture produced with PG 76-22 (PG 67-22 asphalt binder modified with 3.5% SBS) and no RAP, and nine mixtures containing 30% RAP and three soybean-based recycling agents (RA1, RA2, and RA3) at dosages of 0.5%, 2.0%, and 4.0% by weight of binder. Binder characterization included Superpave performance grading, while mixture performance was evaluated using the Hamburg Wheel Tracking (HWT) test, freeze–thaw-conditioned HWT, Semi-Circular Bend (SCB), IDEAL-CT, IDEAL-RT, and Cantabro abrasion loss tests. Increasing recycling-agent dosage improved cracking resistance but progressively reduced rutting resistance, consistent with the measured decrease in binder viscosity. The magnitude of the softening effect followed the order RA3 > RA2 > RA1, consistent with measured viscosity reductions and HWT rut-depth response. Integrating SCB fracture resistance with the HWT rutting criterion identified acceptable dosage ranges of 1.4–4.0%, 0.5–2.8%, and 0.5–0.7% for RA1, RA2, and RA3, respectively. These results demonstrate that the effectiveness of the evaluated recycling agents, as reflected by binder rheology and asphalt mixture performance, influences the balance between fracture resistance and permanent deformation, providing a performance-based framework for optimizing bio-based recycling-agent selection in high-RAP polymer-modified asphalt mixtures.