Rubrene single crystals with well-developed (100) faces extending along the [010] direction were equipped with two planar gold electrodes deposited under low thermal load on the same crystal surface. The current-voltage curves measured on crystals with various thicknesses were analyzed by means of the space-charge-limited current model. In all cases, the curves present a clear trap-filled transition that allows extracting the trap-free mobility along the axis. Working in a gap-type geometry and by comparing the mobility calculated from the Geurst two-dimensional and Mott–Gurney three-dimensional models, a clear 2D to 3D transition is established for a thickness that roughly corresponds to half the distance between the two electrodes. Further quantitative analysis of the data with a differential method leads to the conclusion that charge-transport properties at room temperature are affected by a discrete trap level pointing at above the valence band.
This review first recalls the basic functioning principles of organic electrochemical transistors (OECTs) then focuses on the transduction mechanisms applicable to OECTs. Materials constituting the active semiconducting part are reviewed, from the historical conducting polymers (polyaniline, polypyrrole) to the actual gold standard, poly-3,4-ethylenedioxythiophene: polystyrene sulfonic acid (PEDOT:PSS), as well as the methods used to fabricate these transistors. The review then focuses on applications of OECTs for the detection of small molecules and more particularly of metabolites, with a distinction between enzymatic and non-enzymatic transduction pathways. Finally, the few patents registered on the topic of OECT-based biosensors are reviewed, and new tracks of improvement are proposed.