Ágota Drégelyi-Kiss

Dr. Ágota Drégelyi-Kiss

orcid

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2016 in Ultrasonics Sonochemistry
Verified
Journal Article
Open access
PPPankaj N. Patil
Pankaj N. Patil
PGParag R. Gogate
Parag R. Gogate
Levente CsókaLevente Csóka
Levente Csóka
ÁDÁgota Drégelyi-Kiss
Ágota Drégelyi-Kiss
MHMiklos Horvath
Miklos Horvath
The present work investigates the application of hydrodynamic cavitation (HC) for the pretreatment of wheat straw with an objective of enhancing the biogas production. The hydrodynamic cavitation reactor is based on a stator and rotor assembly. The effect of three different speeds of rotor (2300, 2500, 2700 rpm), wheat straw to water ratios (0.5%, 1% and 1.5% wt/wt) and also treatment times as 2, 4 and 6 min have been investigated in the work using the design of experiments (DOE) approach. It was observed that the methane yield of 31.8 ml was obtained with untreated wheat straw whereas 77.9 ml was obtained with HC pre-treated wheat straw confirming the favourable changes during the pre-treatment. The combined pre-treatment using KOH and HC gave maximum yield of biogas as 172.3 ml. Overall, it has been established that significant enhancement in the biogas production can be obtained due to the pretreatment using HC which can also be further intensified by combination with chemical treatment.

1 April 2015 in Measurement
Verified
Journal Article
Closed access
RHRichárd Horváth
Richárd Horváth
ÁDÁgota Drégelyi-Kiss
Ágota Drégelyi-Kiss

6 December 2014 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Closed access
PDF file
RHRichárd Horváth
Richárd Horváth
Árpád CzifraÁrpád Czifra
Árpád Czifra
ÁDÁgota Drégelyi-Kiss
Ágota Drégelyi-Kiss

30 November 2018 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
GFGabriella Farkas
Gabriella Farkas
ÁDÁgota Drégelyi-Kiss
Ágota Drégelyi-Kiss

22 May 2024 in Hungarian Journal of Industry and Chemistry
Verified
Journal Article
Open access
PDF file
ÁDÁgota Drégelyi-Kiss
Ágota Drégelyi-Kiss
Experiments play a crucial role in additive manufacturing to help researchers develop new materials with enhanced properties or in several types of process optimization tasks. Design of Experiments (DoE) is a valuable tool that is efficient, statistically rigorous and offers a systematic approach to experimentation. In this article, several types of DoE methods such as one-factor-at-a-time (OFAT), full and fractional factorial designs, Taguchi, response surface methodology (RSM) and descriptive screening designs (DSD) are briefly described in addition to some single- and multi-objective optimization methods. The optimization methods apply utility theory (UT), Taguchi and desirability optimization as well as some non-conventional, artificial intelligence-based multi-objective optimization methods illustrated by examples from the field of additive manufacturing. In the second part, the potential factors and response variables are reviewed during the investigation of the seven main categories of additive manufacturing, namely binder jetting (BJT), directed energy deposition (DED), material extrusion (MEX), material jetting (MJT), powder bed fusion (PBF), sheet lamination (SHL) and vat photopolymerization (VPP).

15 May 2025 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
IMRAN SIRAJIMRAN SIRAJ
IMRAN SIRAJ
ÁDÁgota Drégelyi-Kiss
Ágota Drégelyi-Kiss
Fused deposition modelling (FDM) additive manufacturing is influenced by a combination of controllable and uncontrollable factors that significantly impact the mechanical properties of the final product. This study introduces a novel application of multi-linear regression (MLR) for optimizing process parameters to achieve superior mechanical properties through multi-response optimization. The MLR results are compared with prior outcomes derived from grey relational analysis (GRA) to assess their relative effectiveness. Six critical process parameters—density ratio, layer height, nozzle speed, print temperature, and shell thickness—were analyzed to optimize four mechanical performance measures: hardness, flexural strength, compressive strength, and ultimate tensile strength (UTS). While GRA optimization favored lower parameter values, MLR identified higher parameter values as optimal for enhancing mechanical performance. Key differences include variations in nozzle speed (120 mm/s), nozzle temperature (210 °C), and bed temperature (80 °C) for specific performance measures. The findings demonstrate that MLR offers greater flexibility by predicting optimal parameter settings beyond predefined experimental conditions, whereas GRA remains confined to pre-tested configurations. This hybrid optimization approach effectively addresses research gaps by integrating ranking-based optimization (GRA) with predictive modelling (MLR), providing a more comprehensive and generalizable framework for optimizing FDM process parameters. The study highlights the potential of combining these techniques to improve mechanical performance, process efficiency, and predictive accuracy, making it highly relevant for advanced applications such as biomedical implants and high-performance industrial components.