With the goal of extending Unmanned Aerial Vehicles (UAVs) mission duration, a solar recharge strategy is envisioned with lakes as preferred charging and standby areas. The Sherbrooke University Water-Air VEhicle (SUWAVE) concept developed is able to takeoff and land vertically on water. The physical prototype consists in a wing coupled to a rotating center body that minimizes the added components with a passive takeoff maneuver. A dynamic model of takeoff, validated with experimental results, serves as a design tool. The landing is executed by diving, without requiring complex control or wing folding. Structural integrity of the wing is confirmed by investigating the accelerations at impact. A predictive model is developed for various impact velocities. The final prototype has executed multiple repeatable takeoffs and has succeeded in completing full operation cycles of flying, diving, floating and taking off.
1 September 2020 in Journal of Unmanned Vehicle Systems
Tree canopy sampling is critical in many forestry-related applications, including ecophysiology, foliar nutrient diagnostics, remote sensing model development, genetic analysis, and biodiversity monitoring and conservation. Many of these applications require foliage samples that have been exposed to full sunlight. Unfortunately, current sampling techniques are severely limited in cases where site topography (e.g., rivers, cliffs, canyons) or tree height (i.e., branches located above 10 m) make it time-consuming, expensive, and possibly hazardous to collect samples. This paper reviews the recent developments related to unmanned aerial vehicle (UAV) based tree sampling and presents the DeLeaves tool, a new device that can be installed under a small UAV to efficiently sample small branches in the uppermost canopy (i.e., <25 mm stem diameter, <500 g total weight, any orientation). Four different sampling campaigns using the DeLeaves tool are presented to illustrate its real-life use in various environments. So far, the DeLeaves tool has been able to collect more than 250 samples from over 20 different species with an average sampling time of 6 min. These results demonstrate the potential of UAV-based tree sampling to greatly enhance key tasks in forestry, botany, and ecology.
Kauaʻi, an island within the Hawaiʻi archipelago, is home of a unique flora that contains 250 single-island endemic plant species. Threats have led to a significant population decrease where 97% of these plant species are now listed as endangered, critically endangered, or extinct. Vertical cliff habitats on Kauaʻi work as refugia to protect plants from their stressors. However, this habitat makes conservation work particularly difficult, forcing scientists, and botanists to use risky and time-consuming methods such as abseiling to access remote plant populations. Here we present the Mamba, the first aerial system capable of sampling plants on cliffs. This system is operated by two pilots and consists of an actively controlled platform suspended by a long cable under a lifting drone. Eleven otherwise inaccessible samples from five critically endangered species were collected during the first field trials on Kauaʻi Island. The samples are currently surviving in nurseries, demonstrating that the Mamba can be used to complete the conservation life cycle for organisms located in difficult areas, from location to collection, then cultivation and outplanting.
28 July 2022 in IEEE Robotics and Automation Letters
This letter presents the first method for autonomous exploration of unknown cavities in three dimensions (3D) that focuses on minimizing the distance traveled and the length of tether unwound. Considering that the tether entanglements are little influenced by the global path, our approach employs a 2-level hierarchical architecture. The global frontier-based planning solves a Traveling Salesman Problem (TSP) to minimize the distance. The local planning attempts to minimize the path cost and the tether length using an adjustable decision function whose parameters play on the trade-off between these two values. The proposed method, TAPE, is evaluated through detailed simulation studies as well as field tests. On average, our method generates a 4.1% increase in distance traveled compared to the TSP solution without our local planner, with which the length of the tether remains below the maximum allowed value in 53% of the simulated cases against 100% with our method.
17 July 2020 in IEEE Robotics and Automation Letters
Conventional multirotors are unable to land on inclined surfaces without specialized suspensions and adhesion devices. With the development of a bidirectional rotor, landing maneuvers could benefit from rapid thrust reversal, which would increase the landing envelope without involving the addition of heavy and complex landing gears or reduction of payload capacity. This letter presents a model designed to accurately simulate quadrotor landings, the behavior of their stiff landing gear, and the limitations of bidirectional rotors. The model was validated using experimental results on both low-friction and high-friction surfaces, and was then used to test multiple landing algorithms over a wide range of touchdown velocities and slope inclinations to explore the benefits of reverse thrust. It is shown that thrust reversal can nearly double the maximum inclination on which a quadrotor can land and can also allow high vertical velocity landings.
18 June 2020 in IEEE Robotics and Automation Letters
To extend the mission duration of smaller unmanned aerial vehicles, this letter presents a solar recharge approach that uses lakes as landing, charging, and standby areas. The Sherbrooke University Water-Air VEhicle (SUWAVE) is a small aircraft capable of vertical takeoff and landing on water. A second-generation prototype has been developed with new capabilities: solar recharging, autonomous flight, and a larger takeoff envelope using an actuated takeoff strategy. A 3D dynamic model of the new takeoff maneuver is conceived to understand the major forces present during this critical phase. Numerical simulations are validated with experimental results from real takeoffs made in the laboratory and on lakes. The final prototype is shown to have accomplished repeated cycles of autonomous takeoff, followed by assisted flight and landing, without any human physical intervention between cycles.