The present paper deals with the modelling of a Hall effect current sensor with open core magnetic concentrator. 3D magnetic field modelling is carried out using the finite element method (FEM) and Comsol Multiphysics software. Two rectangular core constructions are considered. Different geometric parameters of the magnetic concentrator are varied and their influence on the sensor characteristic is studied, with the aim of reducing the dependence on the output signal on the distance to the conductor. Of the studied parameters, core window length leads to the most significant change in the sensor characteristic. Future work can include the optimization of the sensor construction.
14 February 2023 in RECENT - REzultatele CErcetărilor Noastre Tehnice
Purpose: The purpose of the paper is to clarify the influence of introducing magnetic concentrators on the performance of Hall effect based current sensors and to obtain dependencies of the sensor characteristics on the conductor position. Design/methodology/approach: The finite element method and Comsol software are used for analysis of the three-dimensional magnetic field of the constructions of Hall effect based current sensor with different types of magnetic concentrators – closed-core (of rectangular and toroidal type) and open-core of toroidal type – with additional larger air gap. The Hall plate is also included in the model with its real dimensions and the magnetic flux density is obtained by integrating over its volume. Findings: It has been found that there is dependence of the output signal (proportional to the magnetic flux density) of Hall effect based current sensor with both closed- and open-core magnetic concentrators on the position of the current carrying conductor. Distribution of the magnetic flux density and dependencies of its value in the Hall plate on the conductor position and on the additional air gap have been obtained. Optimization is carried out with respect to the additional air gap and cross-section dimensions of the concentrator. Originality/value: Estimation of the influence of the introducing magnetic concentrators is made with respect to relationships between the output signal and conductor position for different constructions of the magnetic core of the concentrators.
20 April 2023 in RECENT - REzultatele CErcetărilor Noastre Tehnice
Electrospun poly(vinyl alcohol) (PVA) nanofibrous mats containing Spirulina or Chlorella biomass were deposited directly onto a woven cotton fabric to produce fabric–nanomat composites. The effects of the microalgal species on the physicochemical properties of the electrospinning solutions, nanofiber morphology, nanomat development, surface porosity, and through-plane transport properties were comparatively investigated. The incorporation of either biomass increased the viscosity, electrical conductivity, and surface tension of the PVA solution, indicating interactions between the microalgal components and the polymer matrix. FTIR analysis showed that the nanomats largely retained the characteristic absorption bands of neat PVA, with minor spectral features consistent with the incorporated biomass. SEM observations revealed continuous, bead-free nanofibers without visible surface defects. The average fiber diameters were 192 ± 34 nm for PVA/Spirulina and 173 ± 39 nm for PVA/Chlorella. The PVA/Chlorella system produced thicker nanomats, whereas the PVA/Spirulina system exhibited greater projected-area expansion during prolonged electrospinning. Surface porosity was significantly higher for PVA/Spirulina nanomats (57.54 ± 1.34%) than for PVA/Chlorella nanomats (52.69 ± 1.49%). Correspondingly, the PVA/Spirulina composites exhibited higher air permeability, whereas both systems showed comparable relative water vapor permeability. These results demonstrate that the type of microalgal biomass influences nanomat development, morphology, porosity, and air permeability while having a limited effect on relative water vapor permeability, providing a basis for the development of functional textile and filtration-related materials.