Effective thermal management is essential for the safe and efficient operation of lithium-ion battery packs, particularly in compact, airflow-sensitive applications such as drones. This study presents a comprehensive thermal analysis of a 16-cell lithium-ion battery pack by exploring seven geometric configurations under airflow speeds ranging from 0 to 15 m/s and integrating nano-carbon-based phase change materials (PCMs) to enhance heat dissipation. A Computational Fluid Dynamics (CFD) approach was employed using Ansys Discovery and Workbench 2024 R1 to simulate airflow and heat transfer processes with high spatial resolution. Using high-fidelity 3D simulations, we found that the trapezoidal wide-base configuration, combined with a 5-inlet and 1-outlet airflow design, achieved the most balanced cooling performance across all speed regimes. This configuration maintained battery temperatures within the optimal operating range (∼45 °C) in both low- and high-speed airflow conditions, with a maximum temperature reduction of up to 8.3 °C compared to the standard square configuration. Additionally, PCM integration extended the thermal regulation duration to approximately 12.5 min, effectively buffering thermal spikes during peak loads. These findings underscore the critical role of CFD-driven geometric optimization and advanced material integration in designing high-efficiency, compact cooling systems for energy-dense battery applications in drones and portable electronics.
Comparable to electric circuits, thermal systems can be conceptualized as thermal circuits, where heat transfer serves as the information carrier. This study introduces a near-field radiative thermal logic computing system based on phase change materials (PCMs). By leveraging their temperature-dependent properties, a reconfigurable structure is investigated with a rotatable gate, enabling dynamic control of radiative heat flow for logic operations. The system functions analogously to a thermal transistor, where gate temperature modulates thermal radiation between terminals. Thermal property of each gate surface can be switched between heat absorption and emission states, forming the basis for logic switching. The modular design supports multiple PCM-layer combinations and directional configurations. Notably, the total thermal computing capacity can reach over 24 × 109 distinct states with an integration of five PCMs and a pentagon-type gate. This work advances the development of programmable, non-contact, non-electronic logic systems for nanoscale thermal management and energy-efficient computation.
Aerogels have gained increasing attention due to their unique properties since their introduction in 1932. Silica aerogel, one of the earliest and most advanced types, is known for its high transparency and excellent thermal insulation. However, its internal pearl-like structure makes it extremely brittle, which limits its practical applications. To address this, through multiple refinements in formulation and production techniques, we developed a novel Polyvinyl Alcohol (PVA) aerogel using an innovative one-step standing method. This method significantly reduces the gelling time compared to the freeze–thaw method and eliminates the need for refrigeration, making it a more environmentally friendly and sustainable process. The resulting one-step standing PVA aerogel features a hierarchical porous structure, remarkable transparency, improved strength, and enhanced thermal insulation. Mechanical tests demonstrated that the PVA aerogel produced by the one-step standing method exhibited a significantly higher Young’s modulus of 4.2596 MPa, surpassing that of silica, copper nanowire (Cu NM), and graphene aerogels. Additional tests, including transmittance and thermal analysis, further confirmed that the one-step standing PVA aerogel excels in both transparency and thermal insulation. This combination of improved mechanical performance and light transmission opens novel potential applications, such as drug delivery systems, where the aerogel’s pore structure can store drugs while maintaining strength and transparency.
Phase-change materials (PCMs) play a pivotal role in the development of advanced thermal devices due to their reversible phase transitions, which drastically modify their thermal and optical properties. In this study, we present an effective dynamic thermal transistor with an asymmetric design that employs distinct PCMs, vanadium dioxide (VO2), and germanium antimony telluride (GST), on either side of the gate terminal, which is the center of the control unit of the near-field thermal transistor. This asymmetry introduces unique thermal modulation capabilities, taking control of thermal radiation in the near-field regime. VO2 transitions from an insulating to a metallic state, while GST undergoes a reversible switch between amorphous and crystalline phases, each inducing substantial changes in thermal transport properties. By strategically combining these materials, the transistor exhibits enhanced functionality, dynamically switching between states of absorbing and releasing heat by tuning the temperature of gate. This gate terminal not only enables active and efficient thermal management but also provides effective opportunities for manipulating heat flow in radiative thermal circuits. Our findings highlight the potential of such asymmetrically structured thermal transistors in advancing applications across microelectronics, high-speed data processing, and sustainable energy systems, where precise and responsive thermal control is critical for performance and efficiency.
This work presents a comprehensive near-field radiative thermal encryption platform that encodes symbolic information using tristate radiative heat-flux distributions across a two-dimensional array of gate terminals. The approach relies on temperature-programmed modulation of near-field radiative heat transfer enabled by phase-change materials placed on the gate of a thermal transistor. By encoding information into spatially varying gate temperatures, the net gate heat transfer can be tuned, which can be modulated and visualized to encode symbolic patterns. Specifically, the word “NEU” was used as an encryption target across several thermal pixels. A temperature permutation was designed to radiate outward from the shape, and radiative heat transfer at the gate was interpolated accordingly using precomputed temperature and radiation relations. To enhance clarity and digital readability, the map was discretized into square grid blocks, each representing an individual logical thermal cell. The results clarify the distinction between the near-field radiative thermal transistor, a physical three-terminal device, and near-field radiative thermal logic computing, the system-level architecture composed of many such devices for spatial logic and encryption. The results address many-body radiative interactions, lateral thermal diffusion, switching and energy considerations, and scalability pathways. Furthermore, the method avoids reliance on external toolboxes, enabling flexible implementation. This framework bridges near-field radiative thermal logic computation and symbolic encryption, offering another paradigm for contactless, reconfigurable, and visually interpretable heat-based information processing.