Zahi Rachid

Dr. Zahi Rachid


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 June 2019 in Fracture and Structural Integrity
Verified
Journal Article
Open access
PDF file
SASahli Abderahmane
Sahli Abderahmane
ADAit Kaci Djafar
Ait Kaci Djafar
ZRZahi Rachid
Zahi Rachid
MAMoulgada Abdelmadjid
Moulgada Abdelmadjid
BSBenbarek Smail
Benbarek Smail
PMMA has important micro structural heterogeneities such as cavities, and its elastic behavior is greatly affected by the presence of defects that may imply its weakening and cause failure. In areas of high concentrations of stress and due to the presence of cavities, micro cracks appear after crushing cavities due to patient movements, and grow and weld to each other until they form a macro fissure that propagates until the total removal of the prosthesis.. In this study, the existence of a crack emanating from a cavity with a diameter of 0.7 mm was assumed; our assessment takes into account two parameters, the position of the crack in the cement and we calculated the stress intensity factor (SIF) in the proximal part of orthopedic cement.

10 May 2020 in Fracture and Structural Integrity
Verified
Journal Article
Open access
PDF file
MAMoulgada Abdelmadjid
Moulgada Abdelmadjid
ZSZagane Mohammed El Sallah
Zagane Mohammed El Sallah
SASAHLI Abderahmane
SAHLI Abderahmane
ADAit Kaci Djafar
Ait Kaci Djafar
ZRZahi Rachid
Zahi Rachid
The purpose of this study is to analyze the behavior of a crack with and without reinforcement by a composite patch of an aluminum plate in mode I using the finite element method. The repair patch is boron / epoxy and Carbon / epoxy, which are used with great success by many researchers For the distribution of the stresses according to the various loadings, we can conclude that the effect of repair by patch in composite is very distinct, considering the intensities of stresses which decrease for each repair corresponding to the plate not repaired, therefore, the patch in composite dampens the stress field induced at the crack tip and causes a reduction in stresses. The repair with the Bore / epoxy composite patch is more effective than the Carbon/Epoxy patch, this is due to the mechanical properties and the various characteristics specific to boron/Epoxy which gives very significant and very effective results for the repair

28 March 2021 in Fracture and Structural Integrity
Verified
Journal Article
Open access
PDF file
AMAbdelmadjid Moulgada
Abdelmadjid Moulgada
DKDjafar Ait Kaci
Djafar Ait Kaci
MZMohammed El Sallah Zagane
Mohammed El Sallah Zagane
SASAHLI Abderahmane
SAHLI Abderahmane
ZRZahi Rachid
Zahi Rachid
This research is based on the study of the fatigue behavior of an aluminum alloy plate with a central crack. The plate is subjected to a tensile loading on its lower and upper parts. Several parameters were highlighted, such as the loading effect with a load ratio R = 0. The effects of the load ratio on both the repaired and not repaired plates, by two composite patches, which are boron/epoxy and graphite/epoxy, were investigated, as well as the effect of the plate material on plate life, comparing different materials

29 November 2024 in CivilEng
Verified
Journal Article
Open access
PDF file
AMAbdellah Mahieddine
Abdellah Mahieddine
NZNoureddine Ziane
Noureddine Ziane
Giuseppe RutaGiuseppe Ruta
Giuseppe Ruta
ZRZahi Rachid
Zahi Rachid
MZMohamed Zidi
Mohamed Zidi
SMSid Ahmed Meftah
Sid Ahmed Meftah
We develop a new analytical and numerical approach, based on existing models, to describe the onset of lateral–torsional buckling (LTB) for simply supported thin-walled steel members. The profiles have uniform I cross-sections with variable lengths of the flanges, to describe also H cross-sections, they are prestressed by external tendons, and they are subjected to fire and various loadings. Our approach manages to update the value of the prestressing force, accounting for thermal and loads; the critical multipliers result from an eigenvalue problem obtained applying Galërkin’s approach to a system of nonlinear equilibrium equations. Our results are compared to buckling, steady state, and transient state analyses of a Finite Element Method (FEM) simulation, in which an original expression for an equivalent thermal expansion coefficient for the beam–tendon system that accounts for both mechanical and thermal strains is introduced. Our aim is to find estimates for the critical conditions with no geometric imperfections and accounting for the decay of material properties due to fire, thus providing limit values useful for conservative design. This approach can surpass others in the literature and in the existing technical norms.

15 September 2024 in Acta Mechanica Slovaca
Verified
Journal Article
Open access
PDF file
ZRZahi Rachid
Zahi Rachid
HAHabib Achache
Habib Achache
This work proposes a theoretical and numerical study on the behaviour of the tapered rotor. The characteristics of the elements of the rotor are determined; it is to evaluate the expressions of the kinetic and potential energies as well as the...

15 September 2024 in Acta Mechanica Slovaca
Verified
Journal Article
Open access
PDF file
RBRachid Boughedaoui
Rachid Boughedaoui
HAHabib Achache
Habib Achache
AMAbdennour El Mohri
Abdennour El Mohri
ZRZahi Rachid
Zahi Rachid
MAMohamed Azzaz
Mohamed Azzaz
This paper examines the effect of Nd substitution by Gd on the exchange coupling in the Nd₂Fe₁₄B nanocomposite. The structural, microstructural, and magnetic properties of Fe76 Nd(16-X) GdXB8 alloy (X = 0, 2, 4, 8, and 16...