Sami Mukhiemer

Dr. Sami Mukhiemer


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 December 2024 in Processes
Verified
Journal Article
Open access
PDF file
SMSami Mukhiemer
Sami Mukhiemer
ADAllan Daraghmeh
Allan Daraghmeh
HNHeba Nassar Nassar
Heba Nassar Nassar
SHShahzad Hussain
Shahzad Hussain
HLHanyi Lim
Hanyi Lim
HHHikmat S. Hilal
Hikmat S. Hilal
Activated carbon (AC) electrodes from coffee waste (CW) were earlier assessed in supercapacitors but showed lower supercapacitor performance in terms of specific capacity (Cs), specific power (Ps) or both, compared to other biowastes. This work describes how CW-based AC electrode performance may be improved if carefully prepared. Careful processing yields higher graphitization, carbon content (aromaticity), conductivity and porosity free of any residues. Thus, AC electrodes will exhibit higher Cs and Ps simultaneously. CW was first pyrolyzed (CPyrol) and then chemically activated by ZnCl2 (ACChem). Both materials were characterized using SEM, TEM, BET, FT-IR spectra, Raman spectra and XRD. The ACChem exhibited much higher graphitization, crystallinity, specific surface area (SSA), porosity and conductivity. From cyclic voltammetry, the ACChem electrode exhibited a Cs of 261 F/g, an energy density of 18.3 Wh/kg and a Ps of 360 W/kg at 0.33 A/g. From galvanostatic charge–discharge, there was a stable Cs of 150 F/g at 0.33 A/g over 5000 charge–discharge cycles. From electrochemical impedance spectroscopy, the Cs was ~180 F/g, with a low equivalent series resistance (ESR) of 0.56 Ω at a frequency of 0.01 Hz, compared to the literature. The ACChem electrode was superior to the CPyrol electrode and to earlier CW-based AC counterparts, with much lower resistance. Moreover, the electrode competed with other biowaste-based electrodes.

11 October 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
SMSami Mukhiemer
Sami Mukhiemer
ADAllan Daraghmeh
Allan Daraghmeh
HNHeba Nassar Nassar
Heba Nassar Nassar
SHShahzad Hussain
Shahzad Hussain
HLHanyi Lim
Hanyi Lim
HHHikmat S. Hilal
Hikmat S. Hilal
Biowaste sources, like coffee wastes (CWs), are considered for advanced materials. CW was assessed to prepare activated carbon for supercapacitor electrodes, but showed low performance compared to other counterparts. Enhanced CW activation process may help address this limitation. In this study, CW was subjected to two activation methods: physical (pyrolysis) activation and physical-chemical activation using ZnCl2, to determine the more effective approach. Both resulting materials were analyzed using SEM, TEM, BET, Raman spectroscopy and XRD. The physical-chemical activation yielded activated carbon with better characteristics, including a higher specific-surface area (SSA) of ~830 m²/g, compared to 458 m²/g from the physical activation. With its promising potential for supercapacitor electrodes, the former activated carbon was singled out for supercapacitor study. Cyclic voltammetry revealed a specific capacitance of 261 F g-1, and energy density of 18.3 Wh/kg, with power density of 360 W/kg at a current density 0.33 A/g. Charge-discharge studies showed a specific capacitance of 150 F g-1 at the same current density. Electrochemical impedance spectroscopy indicated a specific capacitance of 180 F g-1, with an equivalent series resistance of 0.56 Ω at a low frequency of 0.01 Hz. The electrode exhibited exceptional characteristics, maintaining high stability over 5,000 charge-discharge cycles.