TianQin is a future space-based gravitational wave (GW) observatory targeting the frequency window of 10−4–1 Hz. A large variety of GW sources are expected in this frequency band, including the merger of massive black hole binaries, the inspiral of extreme/intermediate mass ratio systems, stellar-mass black hole binaries, Galactic compact binaries, and so on. TianQin will consist of three Earth orbiting satellites on nearly identical orbits with orbital radii of about 105 km. The satellites will form a normal triangle constellation whose plane is nearly perpendicular to the ecliptic plane. The TianQin project has been progressing smoothly following the ‘0123’ technology roadmap. In step ‘0’, the TianQin laser ranging station has been constructed and it has successfully ranged to all the five retro-reflectors on the Moon. In step ‘1’, the drag-free control technology has been tested and demonstrated using the TianQin-1 satellite. In step ‘2’, the inter-satellite laser interferometry technology will be tested using the pair of TianQin-2 satellites. The TianQin-2 mission has been officially approved and the satellites will be launched around 2026. In step ‘3’, i.e. the TianQin-3 mission, three identical satellites will be launched around 2035 to form the space-based GW detector, TianQin, and to start GW detection in space.
The principal aim of the space-based gravitational wave detectors is to explore the gravitational waves in the 0.1 mHz-1 Hz frequency band. To maximize the potential capability of the experimental apparatus regarding the instrument performance, one needs to acquire accurate information on its sensitivity limit. The sensitivity curve in question, by definition, depends on the amplitudes of signal and noise involved in the measurement. In this work, we explicitly derive, under rather universal assumptions irrelevant to the detailed form of the time-delay interferometry combination, general results of the sensitivity functions. The key feature of the present approach is that both the all-sky and polarization average can be factorized and henceforth evaluated analytically. The resultant expressions are then applied to a variety of time-delay interferometry combinations, inclusively for the optimal channels. In particular, the asymptotical forms of the sensitivity functions are obtained at the high and low frequency limits, and the subsequential implications are analyzed. When compared with the approaches in terms of numerical integration, the obtained formulism furnishes a more straightforward as well as efficient access to the relevant signal noise ratios for the spaceborne gravitational wave detectors.
Direct observation of gravitational waves offers us numerous novel possibilities to further explore the Universe. In practice, the efficiency of the experimental facility for a given gravitational wave source can be measured in terms of the sensitivity function of the instrument. The latter essentially indicates the least incident amplitude required in order to achieve the desired level of the signal-to-noise ratio. Among others, the resultant sensitivity function depends on the specific polarization state of the incident gravitational wave as well as the spatial layout of the detector and its orientation to the wave source. Theoretically, Einstein’s general relativity predicts two tensor polarization modes, from a total of six possible modes arising from an arbitrary perturbation of the spacetime metric. Therefore, in this context, the feasibility of measuring nontensorial polarization states provides access to an alternative theory of gravity. In the present study, we analytically evaluate the response functions for arbitrary time-delay interferometry combinations while enumerating all possible polarization modes. The derivation is accomplished by separating the average on the all-sky solid angle from the remaining expression, which, in turn, gives rise to a few factors independent of the time-delay interferometry combination in question. Moreover, we applied the obtained results to the LISA and TianQin missions, and the asymptotic behavior of the resultant sensitivity functions is analyzed and discussed. Among others, it is observed that, for Sagnac combinations, the averaged response function of the breathing mode attains zero at specific discrete frequencies. Such a frequency value corresponds to a multiple of the reciprocal of the one-way light propagation time along the detector arm, irrelevant to the orientation of the wave source. For all six polarization modes, the present findings can be readily applied to an arbitrary time-delay interferometry combination with improved efficiency and accuracy.
Time delay interferometry (TDI) is an algorithm proposed to suppress the laser frequency noise in space-borne gravitational-wave detectors. As a post-processing technique, it is implemented by constructing a virtual equal-arm interferometer through an appropriate combination of the time-shifted data streams. Such an approach is tailored to the intrinsic feature of space-based gravitational-wave detection, namely, the distances between spacecraft are governed by orbital dynamics and thus cannot be held constant. Among different implementations, geometric TDI was introduced as a method of exhaustion to evaluate the second-generation TDI combinations. The applications of the algebraic approach based on computational algebraic geometry, on the other hand, are mostly restricted to first- and modified first-generation TDI. Besides, geometric TDI furnishes an intuitive physical interpretation of the synthesis of the virtual optical paths. In this paper, geometric TDI is utilized to investigate the modified second-generation TDI combinations in conjunction with a ternary search algorithm. The distinction between second-generation and modified second-generation TDI solutions is elaborated regarding the rate of change of the arm lengths with respect to the opposite cyclic directions. For the 16-link combinations, 40 second-generation TDI solutions are recovered, among which nine are identified as the modified second-generation ones. Furthermore, we explore the properties of the modified second-generation TDI solutions, which turn out to be potentially preferable in practice. Regarding the Taylor expansion of arm lengths in time, the expressions for the leading-order optical path residuals for the relevant geometric TDI combinations are derived, which are further specified using the Keplerian orbits of the spacecraft for the LISA detector constellation. The response function, noise power spectral density, and signal-to-noise ratio of the TDI solutions are given analytically and discussed. We obtain three distinct sensitivity curves among nine 16-link modified second-generation TDI combinations, while eight sensitivity curves are encountered out of 31 second-generation ones. It is argued that the modified second-generation TDI solutions present a quantitative advantage over their second-generation counterparts. Even though the noise suppressions of both scenarios are found to be at the same level, owing to the cancellations in the response function caused by the temporal symmetry of the arm lengths, the magnitude of the gravitational-wave signals is less pronounced for the second-generation TDI solutions. Moreover, analytic analysis confirms that the alternative modified second-generation TDI solutions are desirable as they possess fewer zeros in the average response function and the noise power spectral density, in accordance with previous findings.
The ongoing development of the space-based laser interferometer missions is aiming at unprecedented gravitational wave detections in the millihertz frequency band. The spaceborne nature of the experimental setups leads to a degree of subtlety regarding the otherwise overwhelming laser frequency noise. The cancellation of the latter is accomplished through the time-delay interferometry technique. Moreover, to eventually achieve the desired noise level, the phase fluctuations of the onboard ultrastable oscillator must also be suppressed. This can be fulfilled by introducing sideband signals which, in turn, give rise to an improved cancellation scheme accounting for the clock-jitter noise. Nonetheless, for certain Sagnac-type interferometry layouts, it can be shown that resultant residual clock noise found in the literature can be further improved. In this regard, we propose refined cancellation combinations for two specific clock noise patterns. This is achieved by employing the so-called geometric time-delay interferometry interpretation. It is shown that for specific Sagnac combinations, the residual noise diminishes significantly to attain the experimentally acceptable sensitivity level. Moreover, we argue that the derived combination, in addition to the existing ones in the literature, furnishes a general-purpose cancellation scheme that serves for arbitrary time-delay interferometry combinations. The subsequential residual noise will only involve factors proportional to the commutators between the delay operators. Our arguments reside in the form of the clock noise expressed in terms of the coefficients of the generating set of the first module of syzygies, the linear combination of which originally constitutes the very solution for laser noise reduction.
A pulsar timing array (PTA) is expected to detect a gravitational wave background (GWB) in the nanohertz band within the next decade. This provides an opportunity for one to test gravity theory and cosmology. A typical data analysis method to detect GWB is cross-correlation analysis. The overlap reduction function (ORF) plays an important role in the correlation data analysis of GWB. The present approach to dealing with the intricate integration in ORF is to use short-wave approximation to drop out the tricky terms. In this paper, we provide the full analytic expression of the ORF for PTA without any approximation for all possible polarizations allowed by modifications of general relativity. Compared with the numerical simulation and short-wave approximation, our results are more efficient and widely applicable. Especially for the scalar-longitudinal mode where the short-wave approximation is not available, our analytical expression is particularly significant.