MeiJuan Hu

Dr. MeiJuan Hu


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 November 2024 in Materials
Verified
Journal Article
Open access
PDF file
MHMeiJuan Hu
MeiJuan Hu
QCQiang Chi
Qiang Chi
LJLingkang Ji
Lingkang Ji
WLWeiwei Li
Weiwei Li
SYShuai Yan
Shuai Yan
FCFangjie Cheng
Fangjie Cheng
Controlled interlayer temperature has a profound impact on both the microstructure and mechanical properties of the deposited components. In this study, thin-walled structures made of high-strength low-alloy steel were fabricated using the submerged-arc additive manufacturing process. The effects of varying temperature on the microstructure and mechanical properties of the components were studied. The results showed that the cooling rate within T8/5 decreased as the interlayer temperature increased, which caused the microstructure to transition from a fine-grained structure dominated by bainitic ferrite and granular bainite to a coarse-grained structure dominated by polygonal ferrite. The measurement of mechanical properties showed that due to the influence of the fine-grained structure, the components with low interlayer temperatures exhibit excellent hardness, high strength, and outstanding ductility and toughness. Furthermore, a faster cooling rate disrupts the stability of carbon diffusion, resulting in the development of increased quantities of residual austenitic films within the components with controlled low interlayer temperatures. This augmentation in residual austenite films strengthens the components’ ductility and toughness, enabling the deposited components to exhibit exceptional impact toughness in low-temperature environments.

2 December 2022 in Materials
Verified
Journal Article
Open access
PDF file
MHMeiJuan Hu
MeiJuan Hu
LJLing-Kang Ji
Ling-Kang Ji
QCQiang Chi
Qiang Chi
QMQiu-Rong Ma
Qiu-Rong Ma
Submerged arc additive manufacturing (SAAM) is a viable technique for manufacturing large and complex specialized parts used in structural applications. At present, manufacturing high-strength low-alloy steel T-branch pipe through SAAM has not been reported. This paper uses this technology to manufacture low-alloy structural steel parts. The microstructures of the samples were characterized, which revealed that they were mainly composed of polygonal ferrites. The tensile properties in the horizontal and vertical directions of deposits were studied. Results show that the horizontal tensile strength of deposits was quite close to the vertical one, while the elongation rate in the vertical direction was obviously lower than that in the horizontal direction. Fatigue results indicate that the strain fatigue limit of high-strength low-alloy steel samples in vertical direction was 0.24%. The fatigue fractures of fatigue samples of deposits showed multi-source crack initiation characteristics and the crack propagation regions exhibited typical fatigue striations, so the final instantaneous fracture region showed a ductile fracture. Fatigue performance is very important for the safe service of structural parts, but there is a lack of relevant research on this additive manufacturing part. The results of this paper may support the popularization of the SAAM for high-strength low-alloy steel T-branch pipe.

25 December 2024 in Materials
Verified
Journal Article
Open access
PDF file
QCQiang Chi
Qiang Chi
MHMeiJuan Hu
MeiJuan Hu
PWPeng Wang
Peng Wang
SYShuai Yan
Shuai Yan
MXManye Xue
Manye Xue
FCFangjie Cheng
Fangjie Cheng
Forging additive hybrid manufacturing integrated the high efficiency of forging and the great flexibility of additive manufacturing, which has significant potential in the construction of reactor pressure vessels (RPVs). In the components, the heat-affected zone (HAZ, also called as bonding zone) between the forged substrate zone and the arc deposition zone was key to the final performance of the components. In this study, the Mn-Mo-Ni welding wire was deposited on the 16MnD5 substrate with a submerged arc heat source. The in situ reheat cycle effect of the submerged arc heat source on the microstructure and mechanical properties of the HAZ were studied. The results showed that the HAZ underwent four heat treatment processes, including two full austenitizing stages, one high-temperature stage, and continuous low-temperature tempering, which formed a homogenized microstructure in the HAZ and was mainly composed of tempered sorbite (Tempered-S). The HAZ microhardness is around 278.7 HV, which is about 150 HV lower than the microhardness only conducted by one thermal cycle. Furthermore, the effects of preheating the substrate and adjusting the heat inputs on the HAZ were studied. The results indicated that the clustered cementite was precipitated, which destroys the low-temperature impact toughness of the HAZ after preheating. A suitable heat input not only homogenized the microstructure within the HAZ but also promoted the transformation of grains into equiaxed grains. The −60 °C impact toughness of the HAZ was significantly increased from 96.7 J to 113 J.

8 September 2026 in Progress in Additive Manufacturing
Verified
Journal Article
Closed access
PDF file
MHMeiJuan Hu
MeiJuan Hu
QCQiang Chi
Qiang Chi
AFAnqing Fu
Anqing Fu
JNJie Ning
Jie Ning
LZLin-jie Zhang
Lin-jie Zhang