Fe–Al intermetallic compounds are promising candidates for hydrogen permeation barrier coatings owing to their excellent oxidation stability and inherent resistance to hydrogen embrittlement. However, the mechanical properties and interfacial behavior of different Fe–Al phases, particularly at Fe/Fe–Al interfaces, remain insufficiently understood, limiting their reliable application in hydrogen-containing environments. In this work, density functional theory (DFT) calculations were employed to systematically evaluate the bulk mechanical moduli, surface energetics, and interfacial adhesion of FeAl, Fe3Al, and Fe2Al5. The results reveal that FeAl exhibits the highest elastic and shear moduli due to its B2-ordered structure and directional bonding, while Fe2Al5 shows pronounced anisotropy and the lowest strength as a consequence of its low-symmetry structure. Surface energy analysis indicates that Fe2Al5 possesses relatively stable facets, whereas interfacial adhesion calculations demonstrate that FeAl/Fe and Fe3Al/Fe interfaces provide significantly stronger bonding compared to Fe2Al5/Fe. Charge density and electron localization function (ELF) analyses confirm that Fe–Fe bonds are dominated by metallic character with delocalized electrons, whereas Al-rich regions display enhanced localization, leading to weaker interfacial adhesion in Fe2Al5/Fe. These findings clarify the fundamental mechanisms governing Fe–Al mechanical and interfacial properties and provide theoretical guidance for the design of robust Fe–Al-based hydrogen barrier coatings.
19 April 2025 in Plasma Chemistry and Plasma Processing
Forging additive hybrid manufacturing integrated the high efficiency of forging and the great flexibility of additive manufacturing, which has significant potential in the construction of reactor pressure vessels (RPVs). In the components, the heat-affected zone (HAZ, also called as bonding zone) between the forged substrate zone and the arc deposition zone was key to the final performance of the components. In this study, the Mn-Mo-Ni welding wire was deposited on the 16MnD5 substrate with a submerged arc heat source. The in situ reheat cycle effect of the submerged arc heat source on the microstructure and mechanical properties of the HAZ were studied. The results showed that the HAZ underwent four heat treatment processes, including two full austenitizing stages, one high-temperature stage, and continuous low-temperature tempering, which formed a homogenized microstructure in the HAZ and was mainly composed of tempered sorbite (Tempered-S). The HAZ microhardness is around 278.7 HV, which is about 150 HV lower than the microhardness only conducted by one thermal cycle. Furthermore, the effects of preheating the substrate and adjusting the heat inputs on the HAZ were studied. The results indicated that the clustered cementite was precipitated, which destroys the low-temperature impact toughness of the HAZ after preheating. A suitable heat input not only homogenized the microstructure within the HAZ but also promoted the transformation of grains into equiaxed grains. The −60 °C impact toughness of the HAZ was significantly increased from 96.7 J to 113 J.