In the presented paper, an approach to assessing the size of the plastic deformation zone around a circular cavity intersecting a crushed disintegrated layer in tectonically stressed massive rock is suggested. Fractured rock zones of different quality and spatial configurations are investigated in order to predict the size of dangerous plastic deformation zones or zones of potential rock collapses. The analysis is performed by means of numerical modeling after preliminary verification of the model by in situ and monitoring data. The paper explores the impact of such parameters of the fractured rock zone as the GSI index, the true thickness of the zone, and its inclination angle relative to the plane perpendicular to the axis of the excavation. It was found that with the increase in the thickness and angle of inclination of the fractured rock zone, the size of the hazardous zone in the vicinity of the excavation increases, while with the increase in its strength characteristics, the size of the potential failure zone decreases. According to the results of the study, qualitative dependencies are established, which localize and predict the size of the danger zone, or the potential failure zone in the vicinity of an unfixed excavation.
The development of potash deposits under complex mining and geological conditions requires the implementation of efficient geotechnologies, including backfilling of mined-out voids. Preserving the water-protective strata and preventing mining-induced accidents are impossible without accurate prediction of the stress–strain state of the backfill mass. Traditional models, based on the Mohr–Coulomb criterion, are unable to properly describe physical and mechanical processes occurring in crushed salt rock, including the transition from dilatancy to compaction and nonlinear hardening. This requires the application of specialized models such as the SRP model. The aim of this study is to investigate the mechanical response of crushed salt rock backfill material under complex loading conditions and to calibrate the parameters of the SRP model in order to improve the accuracy of geomechanical calculations. The shape of the plastic flow surface in the deviatoric plane was established, including both shear and cap components. A nonlinear dependence of the friction angle on mean stress was identified and described by a logarithmic function. The law of plastic hardening was determined, and a non-associated plastic flow rule was confirmed in the shear domain. The calibrated SRP model allows for predicting the backfill mass behavior with high reliability, which is a necessary condition for substantiating the parameters of safe potash mining.