The treatment and valorization of organic solid waste has become a promising alternative to increase intensive crop productivity while reducing its environmental impact. Currently, reusing improved organic waste as novel biofertilizers is a vital tool to adapt semiarid agricultural regions to climate change, but this has been scarcely studied in aromatic crops. The present study aims to assess the greenhouse gas emissions, soil properties, and crop yield of a dill crop using a drip irrigation system with a normalized N application rate of 160 kg N ha⁻¹. We compare eight different fertilizing scenarios grouped into organic-based (manures and compost) and inorganic-based inputs (NPK commodities and slow-release formulations). GHG fluxes were measured during the 57-day fertigation period using static chambers. Key soil properties were measured previous to fertilizer applications and at harvest, coinciding with crop yield estimations. An increase in soil organic carbon was observed with stabilized organic treatments at 0–20 cm soil depth. The results show that stabilized organic-based materials lowered NO₃⁻ concentrations in dill biomass more than synthetic fertilizers, producing similar yields to those with synthetic fertilizers. In general, N₂O emissions were positively affected by the treatments. Local specific emission factors for N₂O were determined (0.08%), which were substantially lower than the default value (0.51%) of IPCC. The cumulative CO₂ emissions were high in all the organic scenarios compared to the control treatment (277 kg C-CO₂ ha⁻¹), probably due to differences in labile organic C contents. Organic-based treatments showed multiple positive effects on crop quality, crop yields, and GHG mitigation potential. The use of organic amendments is an optimized N fertilizing strategy to promote circular economy and sustainability.

In Spain and other Mediterranean countries, significant quantities of semi-solid olive mill waste are generated, which should be preferentially applied to agricultural soils to close nutrient cycles. However, two-phase olive mill waste (termed alperujo in Spanish) is known to pose risks to soil quality and plant production when applied to soil in large quantities. Alperujo has high contents of polyphenol substances, which can inhibit microbial growth and are also phytotoxic in nature. However, when applied in appropriate quantities and following specific methods, it is possible that the practice may not pose any risks, and this requires evaluation. As a waste management option, direct application of alperujo can supply plant nutrients and organic matter to degradation-prone Mediterranean soils. In order to validate this circular economy fertilization and soil protection strategy, an 18-month field experiment was undertaken, applying moderate quantities of alperujo on permanent crop groves throughout the Spanish region of Valencia. Eleven experimental parcels with permanent crops managed by farmers were identified to test two scenarios: a single application of 10 t/ha, and a second application of 10 t/ha after 10 months. Soil chemical parameters were assessed at 0, 6, 10, and 18 months. Soil organic carbon, total Kjeldahl nitrogen, pH, electrical conductivity, nitrates, and polyphenol contents were modified by alperujo application, but these effects were highly transient in nature, with generally no lasting effects after 4–6 months for either application scenario. Also, qualitative evaluations carried out by farmers revealed few effects, although some reductions in erosive processes and improvements in plant vigor were noted. As such, based on the measured parameters, it is concluded that the direct soil application of alperujo olive mill wastes at low application rates did not lead to any lasting detrimental effects on soil quality or compromise the productivity of permanent crops in this Mediterranean region.

In this study, four different plastic materials usually used in the agricultural sector (polystyrene film (PS), polyethylene terephthalate film (PET), low-density polyethylene film (LDPE) and linear low-density polyethylene film (LLDPE)) were subjected to different abiotic treatments, including photo-oxidation (ultraviolet and e-beam radiation) and thermochemical treatments, to enhance polymer degradation. The extensive use of these polymers leads to large amounts of plastic waste generation, including small plastic pieces, known as microplastics, which affect the quality of the agricultural environment, including soil fertility and quality. Therefore, polymer degradation strategies are needed to effectively reduce plastic waste to protect the agricultural sector. The degree of polymer degradation was assessed by the use of thermal and spectroscopic analyses, such as TGA and FTIR. In addition, efficiency, cost–benefits, and potential side-effects were also evaluated to propose the optimal degradation strategy to reduce plastic waste from the point of view of efficiency. The results obtained showed that the pre-treatments based on photo-oxidation (ultraviolet B and C and e-beam radiation) were more efficient and had a better cost–benefit for the degradation of the polymers studied in relation to the thermochemical treatments. Specifically, ultraviolet photo-oxidation worked well for PS and PET, requiring low energy and medium times. However, e-beam radiation was recommended for PE (LDPE and LLDPE) degradation, since high energy and long times were needed when ultraviolet energy was applied to this polymer. Furthermore, the overall efficiency of the plastic degradation of pre-treatments should be studied using a multicriteria approach, since FTIR assessments, in some cases, only consider oxidation processes on the plastic surface and do not show the potential integrity changes on the plastic probes.

Nowadays, plastic materials are extensively used in the agri-food sector for multiple purposes. The end-of-life management of these plastics is an environmental challenge because frequent incomplete recoveries after the crop seasons lead to the accumulation of plastics debris in agricultural waste, which is now recognized as an emerging environmental issue of global concern. However, the effects of plastic debris in agricultural waste undergoing biotreatment have been poorly studied. This study assesses the effects of agricultural plastic waste (APW) (LDPE + LLDPE and EPS) (1.25% f.w.) on the vermicomposting process (45 days) in terms of earthworm health by measuring biomarker responses and the enzymatic activity and quality/stabilization of the vermicompost obtained. The results showed that exposure to all the plastic materials tested had negative morphological effects on earthworm survival and body biomass. In the vermicomposting process, the changes detected in the enzymatic activity of the vermicompost and the biofilm seemed to affect the degradation rate of earthworms and the microbiome of the substrate, as demonstrated by the low organic matter mineralization in the vermicompost exposed to plastic. Although no significant changes were recorded in several biomarkers, signs of oxidative stress were evidenced throughout the glutathione S-transferase and carboxylesterase activity, mainly involving balanced oxidative stress and xenobiotic resistance systems.

Olive mill wastewater (OMW) resulting from the olive oil extraction process is usually disposed of in evaporation ponds where it concentrates generating a sludge that pollutes the ponds nearby area. In this study, four bio-treatments were applied for the in-situ bioremediation and valorization of OMW sludge: Landfarming, phytoremediation, composting and vermicomposting. In all cases, the OMW sludge was added with organic residues (mushroom compost, rabbit manure, and chicken manure). The bio-treatments were carried out in duplicate, inoculated and non-inoculated, to determine the effect of a specialized fungal consortium (Aspergillus ochraceus H2 and Scedosporium apiospermum H16) on the efficacy of the bio-treatments. The evaluation of chemical parameters, toxicity, and functional microbial biodiversity revealed that the four techniques depleted the toxicity and favored the stimulation of functional microbiota. Landfarming and phytoremediation allowed the decontamination and improvement of soils. Composting and vermicomposting also offered high-quality products of agronomic interest. Inoculation improved the bioremediation effectiveness. Biological treatments are effective for the safe recovery of contaminated OMW sludge into high-quality services and products.

In this study, several composting strategies such as the use of semipermeable geotextile covers and biochar as an additive were investigated to improve olive mill wastewater (OMW) biodegradability and mitigate greenhouse gas (GHG) emissions during industrial-scale composting. In addition, the final characteristics of the compost obtained and its marketable value were also assessed. For this purpose, four different co-composting mixtures were prepared with OMW as the main ingredient, and two types of manure (cattle and goat manure) and bulking agents (almond pruning and vineyard pruning waste) as N and C sources. The results showed that exothermic behavior and biodegradability were more influenced by the co-composting strategy. The use of biochar as an additive showed a reduction in N losses (−14%) via GHG emissions and a significant improvement in cation exchange capacity (+35%) or the content of humic substances (+10%) in the final product. Lastly, the use of a geotextile cover was shown to be the worst cost-effective strategy, as it did not improve compost quality and showed no effect on GHG emissions.