Department of Analytical Chemistry, Faculty of Chemistry, Regional Campus of International Excellence “Campus Mare Nostrum”, University of Murcia, E-30100 Murcia, Spain
Dr. Rosa Peñalver
Department of Analytical Chemistry, Faculty of Chemistry, Regional Campus of International Excellence “Campus Mare Nostrum”, University of Murcia, E-30100 Murcia, Spain
Microplastics have appeared as emerging pollutants due to the diverse applications of plastics in today's world. Growing evidence points to the negative impacts that airborne microplastics have on human health, as they can enter the human body through respiration. Our aim was to quantify polystyrene airborne microplastics in smaller fractions, thoracic (PM10) and alveolar (PM2.5), as they have scarcely been studied. In this work, we proposed a methodology based on thermogravimetric analysis coupled with mass spectrometry that requires minimal sample preparation and does not limit particle size. We applied this methodology to quantify the airborne polystyrene in PM10 and PM2.5 fractions in mass units of microplastics per m3 of air in an urban and agricultural region during the summer of 2021. The mean concentrations of polystyrene found in the PM10 and PM2.5 fractions were 2.09 and 1.81 ng m-3, respectively. Therefore, the majority of airborne polystyrene microplastics are found in the alveolar fraction which, is associated with severe cardiopulmonary and respiratory diseases. According to air mass backward trajectories, it was noted that the main sources of these emerging pollutants could be related to local agricultural practices.
The global consumption of plastic is growing year by year, producing small plastic pieces known as microplastics (MPs) that adversely affect ecosystems. The use of organic amendments (compost and manure) polluted with MPs affects the quality of agricultural soils, and these MPs can be incorporated into the food chain and negatively impact human health. Current European legislation only considers large plastic particles in organic amendments. There is no information regarding MP pollution. Thus, the development of a methodology to support future legislation ensuring the quality of agricultural soils and food safety is necessary. This proposed methodology is based on thermogravimetry coupled with mass spectrometry to quantify polyethylene and polystyrene (PE and PS) MPs through their mass spectrometry signal intensity of characteristic PE (m/z 41, 43 and 56) and PS (m/z 78 and 104) ions. This method has been validated with several organic amendments where the MP content ranged from 52.6 to 4365.7 mg kg-1 for PE-MPs and from 1.1 to 64.3 mg kg-1 for PS-MPs. The proposed methodology is a quick and robust analytical method to quantify MPs in organic amendments that could support new legislation.
Dispersive magnetic solid-phase extraction (DMSPE) has received growing attention for sample treatment preconcentration prior to the separation of analytes due to its many advantages. In the present work, the potential of DMSPE for the determination of emergent mycotoxins (enniatins A, A1, B and B1, and beauvericin) is investigated for the first time. Different magnetic nanoparticles were tested and a magnetic multiwalled carbon nanotube (Fe3O4@MWCNT) composite was selected for the extraction and preconcentration of the five target mycotoxins in human urine samples before their analysis by ultrahigh performance liquid chromatography coupled to high resolution mass spectrometry (UHPLC-HRMS). The nanocomposite was characterized by energy dispersive X-ray spectrometry, scanning electron microscopy, Fourier transform infrared spectrophotometry, and X-ray diffraction. Several parameters affecting the adsorption and desorption of DMSPE steps were optimized and the method was fully validated. Due to a matrix effect, matrix-matched calibration curves were necessary to carry out quantification. In this way, limits of quantification of between 0.04 and 0.1 μg/L, relative standard deviation values lower than 12% and recoveries between 89.3% and 98.9% were obtained. Finally, a study of the reuse of the Fe3O4@MWCNT composite was carried out, confirming that it can be reused at least four times.
Plastics represent a major threat to marine and terrestrial ecosystems if they are not recycled or disposed properly. Plastics undergo processes of physical erosion and chemical degradation, generating one of the most worrying emerging pollutants: microplastics (MPs), which may be incorporated into the food chain through ingestion by the different organisms that live in that habitat. This study investigates the possible accumulation of MPs in the gut content and integument of deposit feeder sea cucumbers, Holothuria poli Delle Chiaje, 1824 from the Mar Menor lagoon, as well as in the sediments of the areas they inhabit, using laser direct infrared microscopy (LDIR) technique. LDIR is a novel methodology based on illuminating samples with a mid-infrared quantum cascade laser, which was applied to analyse the chemical composition of MPs, as well as their size and shape. This technique offers high sensitivity and selectivity in the measurement of MPs. The most effective sample procedures involved the addition of 3 mL of HNO3 for 48 h at 65 °C for integument samples (1 g) and 4 mL of H2O2 for 2 h at 65 °C for sediment and gut content samples (1 g), with subsequent density flotation process for these two last matrices. The presence of MPs in all analysed samples was confirmed through the proposed methodology, especially polyamide and polyethylene particles, confirming the accumulation of these materials in the marine organism and the sediments. These results are key to understand MPs pollution in marine ecosystems and its possible impact on marine fauna.
In this study, four different plastic materials usually used in the agricultural sector (polystyrene film (PS), polyethylene terephthalate film (PET), low-density polyethylene film (LDPE) and linear low-density polyethylene film (LLDPE)) were subjected to different abiotic treatments, including photo-oxidation (ultraviolet and e-beam radiation) and thermochemical treatments, to enhance polymer degradation. The extensive use of these polymers leads to large amounts of plastic waste generation, including small plastic pieces, known as microplastics, which affect the quality of the agricultural environment, including soil fertility and quality. Therefore, polymer degradation strategies are needed to effectively reduce plastic waste to protect the agricultural sector. The degree of polymer degradation was assessed by the use of thermal and spectroscopic analyses, such as TGA and FTIR. In addition, efficiency, cost–benefits, and potential side-effects were also evaluated to propose the optimal degradation strategy to reduce plastic waste from the point of view of efficiency. The results obtained showed that the pre-treatments based on photo-oxidation (ultraviolet B and C and e-beam radiation) were more efficient and had a better cost–benefit for the degradation of the polymers studied in relation to the thermochemical treatments. Specifically, ultraviolet photo-oxidation worked well for PS and PET, requiring low energy and medium times. However, e-beam radiation was recommended for PE (LDPE and LLDPE) degradation, since high energy and long times were needed when ultraviolet energy was applied to this polymer. Furthermore, the overall efficiency of the plastic degradation of pre-treatments should be studied using a multicriteria approach, since FTIR assessments, in some cases, only consider oxidation processes on the plastic surface and do not show the potential integrity changes on the plastic probes.